Hi Lars, the information in the thread you link above is incorrect. Older 32-bit versions of WSJT-X for Windows did have a Pwr slider that adjusted the Windows sound mixer level for the application

See there... why? If we were talking about washing machines; that would be off topic. A request to add a capability that many folks need to overcome a disability - is NOT! Please do not close it out

I got answer from the RS-918 group. The solution is to calibrate PA TX up to 5 watt when sending FT8 - for the band(s) you would like to

Hi Bill. Now the initial inquiries over the new version of wsjt have died down somewhat, I wonder if you have had time to think about why I have this error? I see that K3UK doesn't have

Hi I found this tutorial for changing from windows internet time to Meinberg https://www.satsignal.eu/ntp/setup.html Thought it might help 73 de Ted G7OBF

This thread seems to be going around in circles as is the norm when we discuss time servers. I will close it sometime after 1200 hours GMT on Wednesday 28th October 2020. In the meantime please

I've been using Dimension 4 v.5.31 with Windows 10 for several years now and have no issues at whatsoever. It comes up as soon as the SSD on my Dell Inspiron N7010 17R laptop boots up and syncs as

Thanks Bill & Dave, FYI: NMEATime2 have added a tech note confirming monotonicity (after rapid one-time start-up correction) to their

Bill: Thanks for the explanation of the technical backgrounds for FST4 and FST4W.One thing I have to clarify is that my measurement was mostly about the transmitter side drift, not on the receiver

Thanks Bill. Well, I don't think the laptop has any trouble decoding; it lists many decodes and they're consistent with how many sigs I see on the waterfall (or don't see where the snr is very low

This thread is now totally off-topic and I'll be closing it tomorrow. Roger G4HZA moderator

Hi Chuck, In case you mean that you see strong signal above 1000 Hz, but no decodes of those, then have you ‘Rx All Freqs’ unticked (above Hound red sign). 73, Reino OH3mA

There is an old program out there called CWGET. It is the best I have found. Secret is turn the AGC OFF, reduce the RF gain, increase the AF Gain as needed and you will find a sweet spot. Noise,

Sirs: I've tried the steps indicated in the pinned text to set the USB audio levels. It's not working. The Mixer menu is not appearing when I click the Tune button, nor do the sound levels of the

Guys, I rarely get a decode even though there are several strong signals on the waterfall. Time is right-on. Been working regular FT8 all morning. Now up frequency trying to work JX2US. Several

Hi Phil, Well, as I understand it, all DSP is mathematical & logical (perhaps fuzzy) - stripping out signals from noise, interpreting changes between senders 'fists' or even the same sender over

Hi John, Decoding manual CW is not a particularly mathematical problem. The problem will be working out what are dots and dashes and inter-letter breaks, especially if the sender is not

Thank you Bill, yes I have looked several times and follow the steps in the pinned post. And it is no problem if using the IC-705. So I hope someone reading this have a RS-918 or mcHF type of radio

Thank you Dave & Bill

On 27/10/2020 02:59, Kenji Rikitake wrote: Hi Kenji san, thanks for your thorough receiver stability analysis. Some other points are relevant here: The transmitting