Hi Lars, in WSJT-X the output is full-swing amplitude when the Pwr slider is at maximum (0 dB (FS)), it is not possible to have a larger amplitude in the digital domain. Sound card levels are not

Hi Dave and Hank, using separate configurations for different callsigns will result in a shared log file, that may be appropriate if QSOs made with all the callsigns are

Hi, I have been comparing my new IC-705 with my RS-918 with 5 watt on FT8 from WSJT-X. I have just done a PA re-calibration for the RS-918. What I can see that I have pwr slider in WSJT-X on max and

Hi gentlemen. We are talking about two different animals! The key difference is lack of error correction in CW. In addition there is no robust time synchronization and symbol rate could be over a

Thank you Andy. Works well.

I use the configurations tab for multi rig setup. try one and see if it will allow a different call as well. I never tried Dave Garber VE3WEJ / VE3IE

Dave, I found my Windows 10 Pro on a new computer was set at 4 hours. But reading Bill's message it seems that to use all features of WSJTX without losing decodes he recommends setting it for higher

John, I have been having the same problem for over a week. Checked, double checked all the settings. Un installed JTAlert and all files that go with it. Reinstalled Jtalert and still bet the same

Gotta do a bit of bragging tonight !! For a year, I've had my FT8 setup software running on one of the square black desktop PCs like we have a the club. A year ago it was doing fairly well with

I would third that request. Working around those jet engines in the Air Force for many years has damaged my hearing similar to the original poster. I can hear a pin drop but any sharp sound is quite

I second that request. I have hearing loss plus PTSD from IEDs in Iraq that affect my ability to decode CW Richard WF2F

Alan and all: I did a quick measurement of an unmodulated carrier frequency drift of FT-891 ("this transmitter"), with the following conditions: FT-891 uses RTTY mode without changing the keying

Hi guys, Have an request. Joe, with your crazy math skills and already existing talents in digital noise reduction, etc.; would you please create a much better CW decoder! See I, and many folks like

Hi Ron, they are not documented other than by the code that writes them. We are considering no longer writing them as they are of limited use. For example with FST4W, the implementation of a noise

John, The error message tells you differently. Something is not set right. While your IP is allowed, are you sure that it is available? The recommended IP address is 127.0.0.1 and the Port should

It is included in the latest release candidate Andy

[quote]Windows Internet Time sync tool w32tm is a full NTP implementation but by default is configured to only check time at large intervals which causes it to make steps.[/quote] Changing The

Two things, first restart your computer, amazing how many digital issues are fixed with this - second, look at RFI issues in the shack. W7SOT

Is there a way to maintain 2 separate logs (adi and text) using 2 separate calls under a single WSJT -X program. I want to switch between my homecall and a special event call. Thanks..Hank K2HJB

Will the IC-705 be added to the list of rigs soon? Thank you in hope.