I second that request. I have hearing loss plus PTSD from IEDs in Iraq that affect my ability to decode CW Richard WF2F

Alan and all: I did a quick measurement of an unmodulated carrier frequency drift of FT-891 ("this transmitter"), with the following conditions: FT-891 uses RTTY mode without changing the keying

Hi guys, Have an request. Joe, with your crazy math skills and already existing talents in digital noise reduction, etc.; would you please create a much better CW decoder! See I, and many folks like

Hi Ron, they are not documented other than by the code that writes them. We are considering no longer writing them as they are of limited use. For example with FST4W, the implementation of a noise

John, The error message tells you differently. Something is not set right. While your IP is allowed, are you sure that it is available? The recommended IP address is 127.0.0.1 and the Port should

It is included in the latest release candidate Andy

[quote]Windows Internet Time sync tool w32tm is a full NTP implementation but by default is configured to only check time at large intervals which causes it to make steps.[/quote] Changing The

Two things, first restart your computer, amazing how many digital issues are fixed with this - second, look at RFI issues in the shack. W7SOT

Is there a way to maintain 2 separate logs (adi and text) using 2 separate calls under a single WSJT -X program. I want to switch between my homecall and a special event call. Thanks..Hank K2HJB

Will the IC-705 be added to the list of rigs soon? Thank you in hope.

Running 10mW tonight on 40M (7038.800) at 900s and RX at 1700 (AF 1600 to 1800). Running 1/4 with a couple of local partners. Bobby/N4AU

The receiving signal strength indicator on the left is showing Indication of no signal received. Do you have RF gain turned off on your radio? 73 de W2LCQ, Ed Jones Frankford Radio Club B.U.G. 204 -

This just popped up. Everything is set right. John -- EMAIL: john@... WEBPAGE: http://www.w9rpm.com/ DX CLUB: http://www.tcdxa.org/

Hi, Actually more precisely there is no audio input to codec (A/D converter in your rig or PC, USB codec or whatever happens change audio into digital format for wsjt-x). 73, Reino OH3mA

Bill, Thanks for your reply. I have checked the following and confirmed as indicated. This has to be an audio problem but I have been unable to find it. Windows 10 is not my friend. 1: USB CODEC

Is the .c2 file format documented anywhere? If so where? Is there a required naming convention for .c2 files? Thanks and 73, Ron n6ywu

Hi, Clearly you have lost audio connection from your rig to PC and wsjt-x. Do you hear the signals from your rig speaker or from PC speaker? If latter Windows has connected your rig to the PC

are you using Dax and a Flex Radio? On 10/26/2020 10:33 AM, KA5VZG wrote:

Then check to see what has changed. Looks like a USB device may have upset the sound settings. Windows is good at reorganising devices without one realising. 73 Alan G4ZFQ

I can hear the signals, but the display on the waterfall is just orange blocks. I don't think I have changed anything,