Will the IC-705 be added to the list of rigs soon? Thank you in hope.

Running 10mW tonight on 40M (7038.800) at 900s and RX at 1700 (AF 1600 to 1800). Running 1/4 with a couple of local partners. Bobby/N4AU

The receiving signal strength indicator on the left is showing Indication of no signal received. Do you have RF gain turned off on your radio? 73 de W2LCQ, Ed Jones Frankford Radio Club B.U.G. 204 -

This just popped up. Everything is set right. John -- EMAIL: john@... WEBPAGE: http://www.w9rpm.com/ DX CLUB: http://www.tcdxa.org/

Hi, Actually more precisely there is no audio input to codec (A/D converter in your rig or PC, USB codec or whatever happens change audio into digital format for wsjt-x). 73, Reino OH3mA

Bill, Thanks for your reply. I have checked the following and confirmed as indicated. This has to be an audio problem but I have been unable to find it. Windows 10 is not my friend. 1: USB CODEC

Is the .c2 file format documented anywhere? If so where? Is there a required naming convention for .c2 files? Thanks and 73, Ron n6ywu

Hi, Clearly you have lost audio connection from your rig to PC and wsjt-x. Do you hear the signals from your rig speaker or from PC speaker? If latter Windows has connected your rig to the PC

are you using Dax and a Flex Radio? On 10/26/2020 10:33 AM, KA5VZG wrote:

Then check to see what has changed. Looks like a USB device may have upset the sound settings. Windows is good at reorganising devices without one realising. 73 Alan G4ZFQ

I can hear the signals, but the display on the waterfall is just orange blocks. I don't think I have changed anything,

Hi Hugo, I suspect that MS have no interest in building an NTP time server network large and robust enough to support their millions of Desktop users. Although MS do publish how to configure win32tm

Bill, your observations about w32tm are interesting (and I just learned something new). Your statement about running w32tm with default settings, presumably those set as part of the Windows

Ron, while your information about the automatic operation of the Dimension 4 time synchronization utility is correct it is only a basic solution to this problem. You comment illustrates that as it is

FYI The latest version of D4 (5.31) will run on Win 8.1 and earlier. Doesn't claim to run on Win 10?? It's fully automatic, updating the system clock at your specified interval with user specified

IF THIS IS TRUE (I DOUBT IT) THEN IT IS CRAZY THAT THE PROGRAM DOES NOT HAVE A SETTING METHOD THAT HOLDS ACROSS REBOOTS. No problem with Nettime like that. Outlook Laptop Gil W0MN Hierro

On May 22 this year I contributed this to the Group about the PC clock setting program «Dimension 4»: In Dimension 4 you MUST open (run) the program, choose «Settings», and answer «yes», to

also the files are located in an "appdata" folder hidden from view normally. if you can get to the 'view' tab in windows to change settings, you can make these folder viewable, but be very

Hi Dick. Almost certainly a Windows ‘audio’ issue. Check that Windows hasn’t set any of the audio systems OFF? A recent Win 10 update did this to me. Regards – Phil Ps. I use the 450D

Kenji This does seem close, if both were connected to dummy loads there would still be ample signal pickup. With a recommended maximum of 0.56Hz for -300 this is quite possible. The HF+ is quite