Hi Dick. Almost certainly a Windows ‘audio’ issue. Check that Windows hasn’t set any of the audio systems OFF? A recent Win 10 update did this to me. Regards – Phil Ps. I use the 450D

Kenji This does seem close, if both were connected to dummy loads there would still be ample signal pickup. With a recommended maximum of 0.56Hz for -300 this is quite possible. The HF+ is quite

Testing conditions: Transmitter: Yaesu FT-891 output 5W with SCU-17 and WSJT-X 2.3.0-rc1 on Ubuntu 20.04 with a mobile whip Receiver: Airspy HF+ Dual Port + gqrx 2.11 and WSJT-X 2.3.0-rc1 on macOS

Same here. Kurt WA3TOY On Sunday, October 18, 2020, 03:46:57 PM EDT, Bill Somerville <g4wjs@...> wrote:

Putting FST4W +200Hz above WSPR makes sense to me. Thanks for info!Kenji Rikitake, JJ1BDX

Thanks Brad. I’m about to give it a try. Jeff Townsend WB8LYJ/R

https://wsjtx.groups.io/g/main/message/12981

https://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.2.2.html#MENUS "Menu->File->Open log

Where do I find the file? I have searched the whole computer.

The Linux version is 20.04.01 LTS 64 bit. I have also installed the 32 bit architecture. I used the Gdebi package installer. Brad WQ5S -- Brad Fuller WQ5S

Let me guess, you are using ver 2.2.2. 2.2.2 has a known error in the header, first line has <eh>, should be <eOh>. Just add the 'o'! 73 - John - N7GHZ

https://wsjtx.groups.io/g/main/message/12859?p=,,,20,0,0,0::relevance,,invalid+ADIF+header,20,2,0,75090360

Error scanning ADIF log Invalid ADIF header??????

no 200hz WSPR 10.138,700 FST4W 10.138,900 73 peter M7PGW On Sun, 25/10/2020 21:24, Gary E. Kohtala via groups.io wrote: This email has been

Didn't you mean 2000 hz? Best regards, Gary, K7EK On Sunday, October 25, 2020, 04:01:26 PM EDT,

suggested for fst4wvare 200hz above wspr peter On Sun, 25/10/2020 13:23, Kenji Rikitake wrote: This email has been scanned by

under settings, general, behavior you don't have single decode checked do you?

Any frequency suggestions for 30m FST4 and FST4W? 73 de Kenji Rikitake, JJ1BDX

One more silly thing to check. Make sure that the mode matches the frequency selected. 73 Sam W2JDB

Hi Roger We are not talking about WSJT-X, but the old WSJT9 and 10. There is a lot of use of FSK441 by the meteor scatter community. FSK441 is not supported by WSJT-X. It is forcing those who need