Ron, while your information about the automatic operation of the Dimension 4 time synchronization utility is correct it is only a basic solution to this problem. You comment illustrates that as it is

FYI The latest version of D4 (5.31) will run on Win 8.1 and earlier. Doesn't claim to run on Win 10?? It's fully automatic, updating the system clock at your specified interval with user specified

IF THIS IS TRUE (I DOUBT IT) THEN IT IS CRAZY THAT THE PROGRAM DOES NOT HAVE A SETTING METHOD THAT HOLDS ACROSS REBOOTS. No problem with Nettime like that. Outlook Laptop Gil W0MN Hierro

On May 22 this year I contributed this to the Group about the PC clock setting program «Dimension 4»: In Dimension 4 you MUST open (run) the program, choose «Settings», and answer «yes», to

also the files are located in an "appdata" folder hidden from view normally. if you can get to the 'view' tab in windows to change settings, you can make these folder viewable, but be very

Hi Dick. Almost certainly a Windows ‘audio’ issue. Check that Windows hasn’t set any of the audio systems OFF? A recent Win 10 update did this to me. Regards – Phil Ps. I use the 450D

Kenji This does seem close, if both were connected to dummy loads there would still be ample signal pickup. With a recommended maximum of 0.56Hz for -300 this is quite possible. The HF+ is quite

Testing conditions: Transmitter: Yaesu FT-891 output 5W with SCU-17 and WSJT-X 2.3.0-rc1 on Ubuntu 20.04 with a mobile whip Receiver: Airspy HF+ Dual Port + gqrx 2.11 and WSJT-X 2.3.0-rc1 on macOS

Same here. Kurt WA3TOY On Sunday, October 18, 2020, 03:46:57 PM EDT, Bill Somerville <g4wjs@...> wrote:

Putting FST4W +200Hz above WSPR makes sense to me. Thanks for info!Kenji Rikitake, JJ1BDX

Thanks Brad. I’m about to give it a try. Jeff Townsend WB8LYJ/R

https://wsjtx.groups.io/g/main/message/12981

https://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.2.2.html#MENUS "Menu->File->Open log

Where do I find the file? I have searched the whole computer.

The Linux version is 20.04.01 LTS 64 bit. I have also installed the 32 bit architecture. I used the Gdebi package installer. Brad WQ5S -- Brad Fuller WQ5S

Let me guess, you are using ver 2.2.2. 2.2.2 has a known error in the header, first line has <eh>, should be <eOh>. Just add the 'o'! 73 - John - N7GHZ

https://wsjtx.groups.io/g/main/message/12859?p=,,,20,0,0,0::relevance,,invalid+ADIF+header,20,2,0,75090360

Error scanning ADIF log Invalid ADIF header??????

no 200hz WSPR 10.138,700 FST4W 10.138,900 73 peter M7PGW On Sun, 25/10/2020 21:24, Gary E. Kohtala via groups.io wrote: This email has been

Didn't you mean 2000 hz? Best regards, Gary, K7EK On Sunday, October 25, 2020, 04:01:26 PM EDT,