Mike - interesting that you posted this. Last night I turned on my rig to let my 12 year old son hear the difference between CW and digital/FT8 signals - he is studying for his ticket. I’ve been

Check your pc clock Sam W2JDB

oops replied to wrong message Dave Garber VE3WEJ / VE3IE

check topbe sure you are on ft8 as the selected mode... Dave Garber VE3WEJ / VE3IE

If your signal is in the middle between the green lines then issue may be somewhere else like other have suggested.

Thank you all. Have checked the items you recommended ( I use dimension 4 for clock sync) and am still having the issue. 73, KI5EGH Mike

Mike, Have you selected Start new period decodes at top? If so there is a known issue that the display stops properly function after an ‘excessive’ amount of decodes. You need now and then erase

Hi Mike, You may have "Start new period decodes at top" selected in "File" => "Settings" "General" -tab. Try disabling that. 73's de Kari,

Make sure you see the signals on waterfall line up with the green lines. If not the signals are not in the middle between green line your timing is off. Check your clock.

FT8 has been working fine then on occasion the RX screen would be blank and then start to populate. Now it is blank all the time. The waterfall in WSJTX shows heavy activity and I can hear it in the

Morning Bill, thanks for the above. Re: the audio clicks (or splats!) at the start and occasionally the end of a transmit period, I take your point about the PTT not being asserted (within the rig?)

Hi Joe, thanks for that. In which case selecting "Settings->Radio->Split Operating->Fake It" should allow EME Doppler tracking to work with the K3/K3S rigs. 73

Bill, The K3/K3S specifically disallows the DT, FR and FT commands while in transmit. From the release notes for firmware version 5.56: 73, ... Joe, W4TV

Hi Bill, Will check it this way. Note: the K3S is currently controlled using the USB connection and WSJT-x. Br. Jan, PAoPLY Verzonden via Yahoo Mail op Android

In the US( and everywhere? ), 3.573 is the FT8 frequency. Still looking for the answer to my question: FST4 was quoted as being used on the 80 meter WSPR freq, but with 2000 hz being used. Does that

Hello, Interesting. Here in the UK 3.573 is very busy come nightfall. 73 Georgina Call: M0EBP DMR ID: 2346259 Allstar: 52178 Locater: IO83PS

Hi Martin, the audio click you are hearing when using CAT PTT is probably due to the PTT not being asserted until after the audio from WSJT-X has started. WSJT-X does try and avoid

Hello Bill (and all), just to add my input to this thread... I'm currently running v2.2.2 on a 32-bit Win 7 PC (a Dell OptiPlex780 with 4G of RAM); the rig is an IC-7610. My PC-to-rig interface is a

For Dave, AD4TJ: The 80m WSPR freq changed months and months ago. To keep abreast of current WSPR happenings, please see http://www.wsprnet.org. The current 80m WSPR freq is 3.5686. Occasionally I

Hi Jan, the first thing to check, and any K3 or K3S user can do this, is if the basic CAT capability needed works. A simple test using a regular FT8 setup for HF can be used. Ensure