From your screen capture, it appears that your waterfall zero slider and waterfall gain slider are too far to the right. Mine run about the 3rd bar from the left of the scale. The RF Gain on the

LOG4OM v2 works well and is free. www.log4om.com LOGic 9 from PDA is a commercial product that also works well www.hosenose.com/logic -- Anthony Luscre K8ZT Ohio Section Section Youth Coordinator &

Why does wsjt-x not include automatic logging to LoTW, QRZ, etc? I suppose the answer is "because there are other apps that do that so why expend the effort?". That's a reasonable answer but the

Which Open-SSL file and its download location? David VA3MJR On 2020-10-22 3:52 a.m., neil_zampella wrote: --

Tom See here https://www.physics.princeton.edu/pulsar/k1jt/wsjtx.html for the deb install package wsjtx_2.2.2_amd64.deb. However WSJT-X V2.2.2 wont work on Linux Mint 18.x as that is

Um ... the program is up to 2.2.2 with a new release candidate 2.3.0-RC1. Try upgrading? Then have you installed the proper Open-SSL file as I'm assuming you're on

Hi. Fetching doesn't work even I have downoladed the file from ARRL the same mentioned before error message persists.

Perhaps unchecking Call 1st would help in that version. 73, Reino OH3mA

Thanks Al that was the clue I needed. I reduced the IC 7300 RF gain to 40 dB on the Receiving bar graph and the waterfall was restored. The problem seemed to happen by itself. It’s fixed now Thanks

Ed: Maybe it is not “not seeing anything”, but instead a very strong signal or your waterfall gain and/or zero is set extremely high. The color of red usually indicates a “strong”

Im suddenly not seeing anything on my waterfall. Never saw this happen before. Im seenig decodes on the band activty side and the RX side of windows appear normall. Can someone tell me what I need to

Version 2.3.0-rc1 When I am attempting to complete a QSO by resending a RR73 or 73, If a different station calls me while I have the Enable TX armed to send the RR73 or 73 it will switch to that

Does anyone know of a PPA with a built install package? All the ones I saw via a search were older, sometimes 2-3 years old.

I have observed what may be this same bug in WSPR and FST4(W) transmissions: The radio will go into transmit, but no audio will be produced. An important clue: If one has CWID enabled (I have it set

I reported this issue here earlier and was told that this is a bug in v2.2.2 and will be fixed in the next release. I have not checked if this has been fixed in v2.2.3rc. 73 de JH3SIF, Keith

Hi Chuck Yes it is persistent and as bill mentioned it is documented. This shortcut was added by a request made to alleviate or facilitate the switching from rrr to rr73 by blind hams as they could

I suspect the problem is caused by Win10 and its latest update. WSJT-Xv2.2.2 and Thetis v2.8.11 were working until the update. Now WSJT-X sees Thetis audio, but won't connect to the CAT system. CAT is

Your new PC is most likely set to allow the computer to turn off USB devices to save power. Check the Power Management tab of all your USB devices in Device Manager. Kyle K7KE

Hi Chuck, keyboard shortcuts are listed by the "Menu->Help->Keyboard Shortcuts" action. 73 Bill G4WJS. On 21/10/2020 19:06, Chuck Adams wrote:

Why would you need a button to duplicate ESC/F4? You just need to select the TX6 message before you call CQ, surely if you can't remember to do that you will also forget to click on the escape