main@WSJTX.groups.io

Re: Sudden Bad Tx3 Message #FT8 #NewUser

Thanks to all who replied. I guess I ham-fisted a checkmark into the Contest block. All is well now.

By James Brown <k5jaz@...> · #1514 ·

Re: Sudden Bad Tx3 Message #FT8 #NewUser

Hi you might have hit the button in Preferences, Advanced that put the software in contest mode see which will make what you describe happen 73 robert W6INO W6INO ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Twenty

By robert kupps · #1513 ·

Re: Halt TX doesn't always work. #WSJTX_config

On Sat, Nov 18, 2017 at 04:52 pm, tom wrote: Gary, I have exactly the same rig and station setup software versions that you do. The only time Halt TX doesn’t work is if I try to halt at the same

By Gary - AC6EG <gdefeyter@...> · #1512 ·

Re: Halt TX doesn't always work. #WSJTX_config

On Sat, Nov 18, 2017 at 04:51 pm, Dave Garber wrote: Why are you not using the internal sub codec and db9 direct. Maybe there is a buffer delay between your radio. And software going via the vspe

By Gary - AC6EG <gdefeyter@...> · #1511 ·

Re: Halt TX doesn't always work. #WSJTX_config

On Sat, Nov 18, 2017 at 11:33 am, Michael Black wrote: There's a difference. Clicking Enable to disable while transmitting continues transmitting....indicating you don't want to transmit next cycle.

By Gary - AC6EG <gdefeyter@...> · #1510 ·

Re: WSJT-X wont open after WIN 10 Update Event Log added #FT8 #WSJTX_config

its working now but here is the screen shot

By Randy Hansen · #1509 · Edited

Re: WSJT-X wont open after WIN 10 Update Event Log added #FT8 #WSJTX_config

Hi Randy, can you right click the wsjtx.exe application and select "Properties" then the "Compatibility" tab and send me a screen capture of the settings please?

By Bill Somerville · #1508 ·

Re: WSJT-X wont open after WIN 10 Update Event Log added #FT8 #WSJTX_config

I am using Microsoft Pro 10. I found a work around by using "trouble shoot compatibility", When you select "test program" it will open. Am I the only one who has a problem? Virus-free.

By Randy Hansen · #1507 ·

Re: Sudden Bad Tx3 Message #FT8 #NewUser

Hi James, the problem is that you have checked the "NA VHF Contest Mode" option. 73 Bill G4WJS.

By Bill Somerville · #1506 ·

Re: WSJT-X wont open after WIN 10 Update Event Log added #FT8 #WSJTX_config

Hi Randy, this seems to be a Microsoft defect. Are you using Windows 10 Pro? I ask because the only other report so far was from a user using that. Although it is not recommended, you can start

By Bill Somerville · #1505 ·

Re: Halt TX doesn't always work. #WSJTX_config

Gary, I have exactly the same rig and station setup software versions that you do. The only time Halt TX doesn’t work is if I try to halt at the same instant that the rig keys. The rig xmits but

By tom · #1504 ·

WSJT-X wont open after WIN 10 Update Event Log added #FT8 #WSJTX_config

Log Name: Application Source: Application Error Date: 11/18/17 15:28:42 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User:

By Randy Hansen · #1503 ·

WSJT-X wont open after WIN 10 Update Event log attached #WSJTX_config #FT8

Log Name: Application Source: Application Error Date: 11/18/17 15:28:42 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User:

By Randy Hansen · #1502 ·

Re: Halt TX doesn't always work. #WSJTX_config

Why are you not using the internal sub codec and db9 direct. Maybe there is a buffer delay between your radio. And software going via the vspe port

By Dave Garber <ve3wej@...> · #1501 ·

Sudden Bad Tx3 Message #FT8 #NewUser

Was operating smoothly when suddenly the auto-sequencer started sending "KD9EFO K5JAZ R EM32" in lieu of the signal report. I deleted then reinstalled v1.8.0 but R EM32 remained in Tx 3. I started

By James Brown <k5jaz@...> · #1500 ·

Re: Halt TX doesn't always work. #WSJTX_config

There's a difference. Clicking Enable to disable while transmitting continues transmitting....indicating you don't want to transmit next cycle. Halt stops the transmission likely indicating

By Mike Black · #1499 ·

Re: Halt TX doesn't always work. #WSJTX_config

It happened to me several times yesterday but today I can't make it NOT work. If I double click an entry or initiate a CQ and immediately click Halt TX, the rig stops transmitting as expected. Maybe

By Gary - AC6EG <gdefeyter@...> · #1498 ·

Re: Halt TX doesn't always work. #WSJTX_config

Do you find this happening when you double-click an entry and then hit Halt? Like you're trying to tail end a QSO or set up split? Others have reported this problem. de Mike W9MDB

By Mike Black · #1497 ·

Halt TX doesn't always work. #WSJTX_config

While working FT8, I occasionally want to use the Halt TX button. I've found that it only works properly about 50% of the time. Sometimes when I click on Halt TX, the Enable TX button changes color

By Gary - AC6EG <gdefeyter@...> · #1496 ·

Re: wsjtx V 1.8 for Linux : Answer #WSJTX_config

I have found the answer. My FT-100D has not been used much for a long time and I have had to refer to the manual to relearn how to use the features. I discovered it was in the split-mode, and the "B"

By Carl Andreasen · #1495 ·

Messages