On Sat, Nov 18, 2017 at 04:51 pm, Dave Garber wrote: Why are you not using the internal sub codec and db9 direct. Maybe there is a buffer delay between your radio. And software going via the vspe

On Sat, Nov 18, 2017 at 11:33 am, Michael Black wrote: There's a difference. Clicking Enable to disable while transmitting continues transmitting....indicating you don't want to transmit next cycle.

its working now but here is the screen shot

Hi Randy, can you right click the wsjtx.exe application and select "Properties" then the "Compatibility" tab and send me a screen capture of the settings please?

I am using Microsoft Pro 10. I found a work around by using "trouble shoot compatibility", When you select "test program" it will open. Am I the only one who has a problem? Virus-free.

Hi James, the problem is that you have checked the "NA VHF Contest Mode" option. 73 Bill G4WJS.

Hi Randy, this seems to be a Microsoft defect. Are you using Windows 10 Pro? I ask because the only other report so far was from a user using that. Although it is not recommended, you can start

Gary, I have exactly the same rig and station setup software versions that you do. The only time Halt TX doesn’t work is if I try to halt at the same instant that the rig keys. The rig xmits but

Log Name: Application Source: Application Error Date: 11/18/17 15:28:42 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User:

Log Name: Application Source: Application Error Date: 11/18/17 15:28:42 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User:

Why are you not using the internal sub codec and db9 direct. Maybe there is a buffer delay between your radio. And software going via the vspe port

Was operating smoothly when suddenly the auto-sequencer started sending "KD9EFO K5JAZ R EM32" in lieu of the signal report. I deleted then reinstalled v1.8.0 but R EM32 remained in Tx 3. I started

There's a difference. Clicking Enable to disable while transmitting continues transmitting....indicating you don't want to transmit next cycle. Halt stops the transmission likely indicating

It happened to me several times yesterday but today I can't make it NOT work. If I double click an entry or initiate a CQ and immediately click Halt TX, the rig stops transmitting as expected. Maybe

Do you find this happening when you double-click an entry and then hit Halt? Like you're trying to tail end a QSO or set up split? Others have reported this problem. de Mike W9MDB

While working FT8, I occasionally want to use the Halt TX button. I've found that it only works properly about 50% of the time. Sometimes when I click on Halt TX, the Enable TX button changes color

I have found the answer. My FT-100D has not been used much for a long time and I have had to refer to the manual to relearn how to use the features. I discovered it was in the split-mode, and the "B"

Feature suggestion: Implement the JT9 submodes JT9-2, JT9-5, JT9-10, and JT9-30. This could be very helpful for say, stations trying to complete 160 meter WAS. (The Version 1.0 User's Guide had an

I have wsjtx V1.8 installed on my Linux machine which is running Linux Mint version 18.2. With everything configured and connected to my FT-100D radio which is using a SignaLink interface, everything

Thank You again Bill.. installed it O.K. and works perfectly. I hope I don't need to ask some simple questions. 73, John