Log Name: Application Source: Application Error Date: 11/18/17 15:28:42 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User:

Log Name: Application Source: Application Error Date: 11/18/17 15:28:42 Event ID: 1000 Task Category: (100) Level: Error Keywords: Classic User:

Why are you not using the internal sub codec and db9 direct. Maybe there is a buffer delay between your radio. And software going via the vspe port

Was operating smoothly when suddenly the auto-sequencer started sending "KD9EFO K5JAZ R EM32" in lieu of the signal report. I deleted then reinstalled v1.8.0 but R EM32 remained in Tx 3. I started

There's a difference. Clicking Enable to disable while transmitting continues transmitting....indicating you don't want to transmit next cycle. Halt stops the transmission likely indicating

It happened to me several times yesterday but today I can't make it NOT work. If I double click an entry or initiate a CQ and immediately click Halt TX, the rig stops transmitting as expected. Maybe

Do you find this happening when you double-click an entry and then hit Halt? Like you're trying to tail end a QSO or set up split? Others have reported this problem. de Mike W9MDB

While working FT8, I occasionally want to use the Halt TX button. I've found that it only works properly about 50% of the time. Sometimes when I click on Halt TX, the Enable TX button changes color

I have found the answer. My FT-100D has not been used much for a long time and I have had to refer to the manual to relearn how to use the features. I discovered it was in the split-mode, and the "B"

Feature suggestion: Implement the JT9 submodes JT9-2, JT9-5, JT9-10, and JT9-30. This could be very helpful for say, stations trying to complete 160 meter WAS. (The Version 1.0 User's Guide had an

I have wsjtx V1.8 installed on my Linux machine which is running Linux Mint version 18.2. With everything configured and connected to my FT-100D radio which is using a SignaLink interface, everything

Thank You again Bill.. installed it O.K. and works perfectly. I hope I don't need to ask some simple questions. 73, John

Hi John, GA stands for General Availability, i.e. v1.8.0 is no longer a beta release. Download and install the latest version from the project web

Thanks Bill. I have no idea how to install the GA release. From what I find it is for Linux. Is that right? I guess I quite do not understand , sorry. 73, John

Hi John, the v1.8.0 GA release is now out, you should probably upgrade from the release candidate version. CTRL+click on he waterfall to set both Tx and Rx offset to a free frequency before calling

I have 1.8.0-rc3.. there is no RX=TX box available. Have to adjust TX after changing RX 73, John KJ1J

Hello All, Following Joe's WSJT-X 1.8.0 GA Release message, I've updated my Lauchpad PPA’s (WSJTX and WSJTX-NEXT) as released by the WSJT Development Team. Both packages are sitting at the

For years, I've been using JTAlert macros to send personalized 73 text messages when operating JT65 or JT9. I recently had a FT8 QSO with Bob Hensy, K4VBM, in which I sent TU BOB GL 73. The auto

Hello All, Following Joe's WSJT-X RC3 message yesterday, I've updated my Lauchpad PPA (WSJTX-NEXT) to RC3 as released by the WSJT Development Team. Supported Distributions: * Trusty, Xenial,

Thanks Bill I didn't realize I could reset T5 to the default 73 by simply double clicking the T5 button. That might be a handy feature to add to the T6 button. I'm finding that if I edit the CQ