Check: File -> Settings. On the radio tab check the "Split Operation" section. It keeps your transmit audio around 1500 Hz which allows you to work the edges of the band and keeps the second audio

Why does Wsjtx set my rig to split operations upon transmit? For example 14.074.15 to 14.073.15 Chuck KB7OGE

But it is shutting off MY transmit when HE sends 73... Also noticed that if you double click on his call when he is calling CQ, it does not do this. Only when you double click when he is talking to a

It's my understanding this is to speed up the QSO process when the station gets a 73 all the information for a valid QSO has been received.

I ran into this last week and asked about it on the Facebook group but no one seemed to understand what I was talking about. I personally like to hunt and pounce. I'll spot a station I want to work

Got the problem fixed. Just had to set the CAT Port to 7 and the PTT to CAT Thanks to all Chuck KB7OGE

i am not sure you need the RS232 to DB9 cable. I am using the Rigblaster Advantage with a Yaseu ft950 with just the usb cable and all works fine once I stopped trying to use the serial DB9

Thanks for the information. I will give Cat a try. Chuck KB7OGE

I don’t have a FT450D or a RigBlaster Plug&Play but let me take a stab at this. There are usually 3 different items when working digital modes, that work more or less independent: Sound. The

Well lets try this request for help again. I cannot get Wsjtx rc2 to control the radio or to transmit with PTT. My Equipment is as follows: Rig: Yaesu FT 450D OS: Windows 10 Soft: fldigi v4.0.8 On

Thanks Mike. Took me a while to figure out exactly what you meant, but when I right clicked inside the blank Working Frequencies table, I saw the option to Reset and used it to restore the

Settings/Frequencies -- right-click and Reset. One time needed due to bug in earlier dev versions. de Mike W0MDB

Good morning, I just installed rc2 on Win7 -32 bit desktop PC. For some reason, the drop down menu for the Frequency / Band window doesn't work. It worked fine in rc-1. I'm using OmniRig to control

W6INO ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Twenty years from now, you will be more disappointed by the things you didn't do than by the ones you did do. So, throw off the bowlines. Sail away from the safe

I need help with the settings I can not get Rigcontrol (CAT) or PTT to work. I have a FT450D, Rigblaster Plug and Play, and windows 10. For all other programs I have CAT on com7 and PTT (Rigblaster)

1- I have noticed the same thing. I think if you click soon enough, it can be a valid transmission however I suspect it will come on not matter what, if you are in the correct 15 segment of the

Hello, Dick. My answers are in-line below:

Been trying FT8 for a while now and posted questions on the 'digitalradio' forum but got no responses, so will try here: 1) Running FT-8, when I double-click on a station calling CQ, WSJT-X

Hello All, The Hamlib development team recently made a slight change to their build invocation. As result, a minor change to the JTSDK-Win Hamlib3 build script was required. TO UPGRADE: * Open

Hi, A number of issues have arisen with the later model Yaesu rigs (namely FT991/991A and FT891) and software – a direct result of Yaesu NOT implementing some basic functions and changing some