Well lets try this request for help again. I cannot get Wsjtx rc2 to control the radio or to transmit with PTT. My Equipment is as follows: Rig: Yaesu FT 450D OS: Windows 10 Soft: fldigi v4.0.8 On

Thanks Mike. Took me a while to figure out exactly what you meant, but when I right clicked inside the blank Working Frequencies table, I saw the option to Reset and used it to restore the

Settings/Frequencies -- right-click and Reset. One time needed due to bug in earlier dev versions. de Mike W0MDB From: Gary - AC6EG <gdefeyter@...> To: WSJTX@groups.io Sent: Wednesday,

Good morning, I just installed rc2 on Win7 -32 bit desktop PC. For some reason, the drop down menu for the Frequency / Band window doesn't work. It worked fine in rc-1. I'm using OmniRig to control

W6INO ~~~~~~~~~~~~~~~~~~~~~~~~~~~ Twenty years from now, you will be more disappointed by the things you didn't do than by the ones you did do. So, throw off the bowlines. Sail away from the safe

I need help with the settings I can not get Rigcontrol (CAT) or PTT to work. I have a FT450D, Rigblaster Plug and Play, and windows 10. For all other programs I have CAT on com7 and PTT (Rigblaster)

1- I have noticed the same thing. I think if you click soon enough, it can be a valid transmission however I suspect it will come on not matter what, if you are in the correct 15 segment of the

Hello, Dick. My answers are in-line below:

Been trying FT8 for a while now and posted questions on the 'digitalradio' forum but got no responses, so will try here: 1) Running FT-8, when I double-click on a station calling CQ, WSJT-X

Hello All, The Hamlib development team recently made a slight change to their build invocation. As result, a minor change to the JTSDK-Win Hamlib3 build script was required. TO UPGRADE: * Open

Hi, A number of issues have arisen with the later model Yaesu rigs (namely FT991/991A and FT891) and software – a direct result of Yaesu NOT implementing some basic functions and changing some

Hi Jim, I need more information, please check the documentation fully and ensure you have the setup correct. If you have been using JTAlertX ADIF file logging up until installing QSO Relay I gather

Bruce, I installed QSO Relay 1.3 for the first time this morning and it deleted my existing JTAlert ADIF file of over 9,000 QSOs! Glad I had made a backup of the ADIF file before starting. What did I

Please be advised that a new release of QSO Relay (Version 1.3) is now available at http://www.vk2byi.com.au/qsorelay/ QSO Relay (v1.3) addresses the following issues: Modified to work with

I am now using QSO Relay and it works awesome with my HRD 6.xx program and logs JT Alert to HRD. It is free and easy to set up. I respect Laurie's decision to not support HRD and

Laurie said he wasn't going to go in to details or even discuss this again. There was some bad blood going on when HRD blocked JTAlert without warning. A lot of people switched away from HRD for that

I am curious, do we know why the JTAlert people dropped this feature? They must have had their reasons. HRD is my master local LOG and the automatic logging of JTAlert to HRD is one of the reasons I

What country are you in and from which country did you buy your rig? Chances are that you are trying to TX out of your 5MHz allocation (which is dial freq and audio offset). I’d double check

would most welcome any hints on how to make this rig tx/rx jt65/wsjtx on 5mhz. am running the signalink box and all is ok on everything but 5mhz.

Roger, you haven't told us: That said, you might have more joy with the WSJT-X Ubuntu PPA, which is to be found at https://launchpad.net/~ki7mt/+archive/ubuntu/wsjtx. There is also