On 15/07/2020 00:24, ajparent1/kb1gmx wrote: Allison, a build is not difficult many Linux users build WSJT-X. If you don't want to build then you must wait for Linux packages

Not helpful... A system upgrade is very time consuming. A full build will be fun trying to solve dependency issues. Allison

John If you are using V1.4 Beta version of WSJT-X you are not using the correct version of software presently at V2.2.2. My 706 and signalink uses VOX as the ptt. Rick KD0XD

Hi Roger, when using multiple WSJT-X instances you should have the first instance started with no --rig-name= command line option. 73 Bill G4WJS.

On 14/07/2020 22:31, ny2ny wrote: Hi Jay, OK, please open a CMD prompt window and type this: where Qt5Core.dll and report what is printed please? 73 Bill G4WJS.

Hope this is not a repeat but I sent it earlier and did not see it come through I have researched the messages on this group and the documentation for WSJT-X and cant find anything on this problem. I

First suggestion is to crank up the #29 control link baud rate to 19200. Good news is that if you can change frequency you have picked the correct rig ID 58h. Now for some questions: 1- What Icom

Hi Bill - I un-installed WSJT-x, rebooted my computer, downloaded WSJT-X 64-bit with same result. However, I un-installed WSJT-x, rebooted my computer, downloaded WSJT-x 32-bit and NO error

Hi Allison, there is no such claim. The package we produce is targeted at Ubuntu 18.04. Mint Linux 19 is equivalent to that. You have two choices, either upgrade your system to Cinnamon, or build

It turned out that the file from ARRL was defective since that have fixed it an all is well.

I found this helpful https://www.youtube.com/watch?reload=9&v=PyUs6KkPr6E Herb WB8ASI

when I attempt to install the wsjtx_2.2.2_amd64 from the Prinction page the package is uninstallable on a fairly fresh Linux Mint 18.4 system. The page claimed the package is correct for that version

73 Tom DF5JL Am 14. Juli. 2020 um 17:05 schrieb Dave Alexander:

It is important that the same baud rate is entered on the transceiver and the software. Here it runs with 57600 Baud. Install the driver first, then connect the TS-590SG. It is

Just add 10.140 (FT4) to your frequencies list

I have found that my contact rate is improved when fishing among a moderate density of fishers. I almost avoid 20 m on FT8 due to the density of participants. On Field Day most of my contacts were

One note for all - 33 & 34 set the filter limits & yes they are very important. You may want to lower #33 to 150 or 200 Hz, especially if you are working Fox & Hound - DXpedition as they frequently

Thanks, I’ll try these. 73’s Dave KA3PMW

20 m FT4 is very fine to work. In Europe Germany the 30m band is allmost much better. Can you implement the 30m band? Tnx, vy 73, dieter dl2xm

Last thing I forgot to mention, you'll want a USB cable with ferrite cores on it, I got this one: https://www.amazon.com/gp/product/B003MQ29B2. I was getting errors when it would try to PTT on certain