Hi Paul, Strange, are you using W10? I'm on W10 64 bit Pro. 73, Bob On 07/06/2020 09:58, Paul Turner wrote:

That’s strange Bob. I also get the “… not in CALL3.TXT” message but I can’t look up any callsigns, even though they are all listed as expected in CALL3.TXT. Version 2.2.0 works fine. 73,

Hi Paul, I'm not seeing that, seems to work OK. However, if the call does not have an entry, I now get a pop-up box saying "G9XYZ is not in CALL3.TXT" which I have to clear. This is

Callsign lookup does work fine on 2.2.0. I will use that for now. 73, Paul G4IJE.

Have I found a bug in the callsign "lookup" feature of version 2.2.1? If I type a callsign in the "DX Call" box and click "Lookup", the DX Grid does not appear, even though the required data is in the

Hi, I use a laptop with Vista for 144 & 432. I can still make QSOs with stations who are using the new releases. However I don't get the benefit of the new decoder or contest modes

This and 2.2.0 won't install on my Ubuntu 19.10: DISTRIB_ID=Ubuntu DISTRIB_RELEASE=19.10 DISTRIB_CODENAME=eoan DISTRIB_DESCRIPTION="Ubuntu 19.10" john@hamshack:~/Downloads$ sudo dpkg -i

Thanks for resolving of FT-991/FT-991A CAT problem. But It does not resolve on FT-897. Error message is "riglib error Target VFO unaccessible getting frequency" and CAT testing goes into

That’s why I suggested that be checked. If the wrong audio is ticked, it will appear that everything is working but no power output. Gerry Klotz

All: I am going through the FCAL procedure within the users guide. I am running a ICOM IC-970H, thus have no ability to tune in WWV. Would it be advisable to use a calibrated signal source with a

Hi Gerald, when you click the speaker icon to go into sounds on speaker you see the various speaker alternatives including USB audio codec. The default audio speaker is Realtech (which has the green

Wayne click on the speaker icon on the bottom task bar. Make sure you have chosen the usb not the regular speakers. KB9pki Gerry Klotz

Hi Herb I will look in privacy settings I think it will be the speaker rather than microphone for TX Cheers Wayne VK4 WTN

Thanks Bill as soon as I get home I will try the steps in the procedure and get back to the group cheers Wayne VK4WTN

Check in Win10 Privacy settings that the mic is turned on for WSJTX. 73 Herb WB8ASI

On 07/06/2020 01:28, Wayne Newport wrote: Hi Wayne, please follow the steps in this old post on how to set Tx audio levels: https://groups.io/g/WSJTX/message/5077

hi all, I hope someone can help me. I just changed my shack computer (Windows 10). I downloaded the driver from the Kenwood website ok. I run wsjt-x via DXCommander. Rig control via CAT is ok. Recieve

Do remember that you can add any frequency you want to the list in less than a minute. Gary - AG0N

Not really. A few days ago, when .313 was plugged with activity, several took to the alternate of .323. Even that got fairly full for awhile, but did manage. Surprisingly, very few showed up on

Ralph, The latest version fixes the Hamlib problem, http://physics.princeton.edu/pulsar/K1JT/wsjtx.html Bruce N7XGR