Frequency calibration can be important for modes other than JT/FT (which doesn’t care). Operating MSK-144 on 6M with a frequency error more than 200 Hz will leave you wondering where everyone

I found the mixer panel yesterday and it has been running fine all day . Tnx for the reply John Glenn Yerby Coldwell Banker Residential Brokerage The Brubaker Group Broker Associate, GRI, CRS 2110

Hi Steve, thanks for the issue report and further details. This is a known problem with some Windows Language selections, it is related to the region settings of the decimal point and number grouping

There WAS an opening to EU this morning on 6m ;-)  Could have been you had a meteor or satellite link to the prop, which gave you a brief connection... GL and VY 73, Lance -- Lance Collister,

Saw decode on six meters this morning for HA7TM however think that might be real 15 second opening considering good decode (RARE for us in WTX) Seen the weird decodes Point antenna at horizon

Hi Gary, Not sure where you got the idea "its needed because it has to be within 1 hz for FT8". There is no such requirement. You will not get more decodes after calibrating. If you want to enter

“Fake it” split function automatically adjusts your Tx VFO frequency on the radio to keep your actual transmit tones between 1500Hz and 2000Hz. Keeping your Tx tones above 1500Hz ensures that *if*

I thought that too. Maybe if the four digits received in a CQ call match the first 4 digits of a stored locator, the extra two digits could be added automatically. 73, Paul G4IJE.

Hi Bill, my System WIN10 64bit v. 1909 with 8gb ram. by starting the programm is on the taskmanager wsjt 1x open with 0% systemlast. 73 Steve Am 18.05.2020 um 18:25

Has anyone succeeded running WSJTX loaded on Raspberry Pi and the KX2? Can you share the settings on the WSJTX side as well as the KX2 side? Also, what kind of sound card do you use? Thanks. Hiroki

Tom If you are working portable or special events station the stored QTH locator might be incorrect. Charlie G4EST www.g4est.me.uk

Treatment of QTH Locators in WSJT-X On May 6th, 2020, I raised the following question, with no feedback from the programmers so far: «Another strange thing is that when double clicking a call

I have the same setup at home. I use TX Hold and keep my eye on the waterfall to be sure I am transmitting on a clear frequency. Can you please explain the “fake it” split function and why I

Hi Steve, does wsjtx start but not show the UI, i.e. is it visible in Windows Task Manager? What version of Windows are you using? 73 Bill G4WJS.

OK I want to try again to make my point and I basically agree with Hal. I understand there is a need for RRR and closing the contact with 73 or a custom thank you is the courteous thing to do. My

No problems at all here with the same setup. Windows updates can change things around though and require resetting. I have 4 sound devices hooked to my PC and they all play nicely. -- 73, -John

Thanks Neil, I read about that also, but couldn't find anything that said what the "Ref Spec " did or was for. Maybe one of our more informed members could enlighten us 73, John

Dick, When your computer slows down, use Task Manager to see what is using the most memory. Incidentally, how much memory does your laptop have? You might also want to see how much cpu

On 18/05/2020 15:33, glenn@... wrote: OM, the default is not to save them ("Menu->Save-None") do you have chosen to enable saving at some point. 73 Bill

I am a newbie to FT8, and after reading this forum for a bit there are different opinions about lots of things. In reference to RRR/RR73, I do not have a problem with either… to me it is a sign