I agree with Lance and Kai about the use of RRR. I rarely send RR73, and then only under good conditions and when I have high confidence it will be received. And I do not send RR73 multiple times; I

Thanks, Neil, I will try to remember that key Dave Garber VE3WEJ / VE3IE

See below On 5/18/2020 8:51 AM, Dave Garber wrote: Already reported, and fix is in next release. Press the F4 key when WSJT-X has focus, and everything clears.

FWIW ... I'd uncheck the Flatten box too ... its only needed for certain situations. See the User Guide section 10.7 for more info. Neil, KN3ILZ On 5/18/2020 8:43 AM,

Um ... Tx5 has ALWAYS been a 73 in JT65/JT9/FT8/FT4. It is the acknowledgement from the answering station TO the CQ calling station. RR73 is usually the CQ station's reply to an R-xx from

Strange.....I finally got it to work by doing the following: 1. Changed my call from K2H/ALB to WA3AFS. 2. Double clicked on the TX4 circle which switched to RR73 3. Tried calling some interesting DX

running this rc1 version, with very little issues. so far the only issue, if you can call it that, is the 'blank line between decoding periods' does not seem to work on every cycle and I do ask for

Hi Reino, Yes wsjt has access to the mike. I finally found the problem. On the waterfall settings somehow the check mark had moved to "Ref Spec" instead of being in the "Flatten" box.

Bob, the use of a message with RR73 is to acknowledge receipt of your report along with acknowledgement that your sent report has been received, a contraction or portmanteau message derived from an

Another nice gift from the Chinese. 73 de NØIGU Jon On Monday, May 18, 2020, 06:42:41 AM CDT, <glenn@...> wrote:

I can't get TX5 to RR73 (rather than the current 73), in fact I have nothing in the macro sequence with an "R". My sequence is TX1, TX3 and TX5. At a minimum I would like to transmit a RR73, if not

Yep! All works now as it was the dang windows update. Windows update "muted" the mic input for some reason. That is now fixed and all is good. Thanks for the help gents!

Hi Jeff, I'm not sure who your email is meant for, but I wrote about the VN1YV/R LE67 decode. I am using WSJT-X 2.2.0-rc1 and have been since the first day it was available. I think this is the

Tnx Bob. I may put a sticky note on the edge of the screen so I remember how to fix it 73 ND9Y

Tnx Luis I will have to remember that the next time I change computers assuming I can remember that...hihi ND9Y

I have a red green colour deficiency and found the original green more visible. Looking at it closely, however, I suspect the B&W contrast with the new green is actually greater so it's something we

Maybe a different color would be better, since the different eyes see the current green differently. For my eyes the previous green was better. Ted W4YJC -- Ted Wirick zebra30@...

Hi Howard, that is abnormal behaviour. It can happen if the WSJT-X is not closed gracefully. How are you shutting down WSJT-X? 73 Bill G4WJS.

Hi Knut, thanks for the update, glad you have it working. No signals will pass by your station without notice, hi hi. 73 Bill G4WJS.

Hi Randy, you don't mention which version of WSJT-X you are using. I suspect it is the latest v2.2.0 RC1 beta test version, that version has a known issue with using RTS or DTR for PTT. For now you