I am running SES K2H/NAS and I can not toggle TX4 to RR73 when using that call. If I change call to K2H I am able to toggle. It will stay in the selected message when changing it back to K2H/NAS I

Thanks Neil and Bill, That describes well. I had noticed since sometime ago that my callers just sent me report without grid square that did't appear to pskreporter. Now I recognized that I do the

Hi John, OK, that's useful to know. I missed the post when you stated that. In a meeting at the moment, will pick up on the diagnosis a bit later. 73

You are probably better using VB Cable or purchasing a VAC licence rather than using the sound card stereo mix for audio loopback routing. The problem with stereo mix is that it has all audio sources

its easy to miss obvious things. I was not seeing decodes and then I noticed that my rx had been set to LSB somehow. Probably not your problem. 73

tks Herb. Turns out that last w10 update installed a new realtek driver and audio control panel. On this new contrlol panel the stereo mix was disabled. So I clicked that box on and it took care of

Bill: Duh! Yep, I didn't have Show DXCC etc checked. I thought it worked that way by default. Now all I have to do is figure out the color differences between the windows version and the linux

Uh, no... that is incorrect... This problem started back when I was using v2.1.2 & is still present in the new beta. 73 - John - N7GHZ

I'm new to MS and this group. Is there a basis for saying any times of the day is are better for meteor scatter? Or is it matter of the density and composition of whatever debris our orbit happens to

maybe check in Win10 Settings > Privacy that the microphone is allowed to WSJTX. I've had that change in the past upon Win10 update. Just a thought. 73 Herb WB8ASI

I have wstjx installed on an AMD Phenom runnning w10 latest version. Previously, 2 months ago, everything was fine. The audio from HDSDR mapped into wstjx fine. As a matter of fact wstj was able to

On 14/05/2020 19:20, Ray wrote: Hi Ray, the highlighting you are seeing is by an external application, perhaps JTAlert or DX Lab Suite SpotCollector. The only highlighting you

Are you using JTAlert? My guess it that JTA is overlaying colors from your setup there. 73 Herb WB8ASI

I think I have it. Thanks to both of you! Steve, N4JQQ

Dave, you are incorrect on all counts there. Please check your facts before making such statements, it is not helpful. The only salient fact that seems to be missed is that the OP is using a beta

Upgraded to 2.2 beta, I had no problems with standard version. One thing confuses me (at my age a common occurrence). In the left panel example below, one sign has null color, a previously worked

Thank you to the friends who took the time to help me, and especially to Bill G4WJS, who steered me in the right directioN, Ken AB1J and Andreas N8NU, who gave the final touch. Everything works fine

Hi John , I am sure you can run your TS440S with DXlab Commander and then you choose DXlab Commander under WSJT-X as rig entry. DXlab commander is a great tool for remote control of many

One (N1MM) uses it's own internal driver code. The Other (WSJTx) uses an external library, aka Hamlib, though a semi customised version shipped with WSJTx. They are like chalk and cheese. N1MM

Bart, The wsjtx_log.adi is a plain text file. You should be able to "open" it or view it with a plain text editor. You can also copy and save the file as: wsjtx_log.adi.txt which should