I've encountered a 2 or 3 stations in the RSGB FT4 contests who seem to be deliberately running two QSOs on alternate transmit cycles. I presume there is some application which allows the to do

Yes, I see that now Bill. I must have tried to jump back to some Tx prior to 5 when deciding to abandon the clearing upon logging option. Guess I should give it another try. Thanks, Herb

Herb, the Tx5 message is not cleared for that very reason. 73 Bill G4WJS. On 13/05/2020 17:09, Herb Blue wrote:

The only caution in using the "Clear DX call and grid after logging" option is when the 73 is sent and/or received, and you auto log....if a decode is missed and you need to resend to complete the

Hi Joe, if the Tx1 message is being selected that is effectively answering a called, i.e. RR73 is probably being interpreted as a grid square in this case. 73

Tx starts when it's supposed to start: at the 15-second boundary. You are double-clicking well before that boundary, because the program is now displaying decodes earlier. -- 73, Joe, K1JT

Thanks for the tip Rick. Good to know. I've forever been clearing the call from the DX Call box which clears everything, but will start using F4. 73 Herb WB8ASI

On 13/05/2020 16:51, Harold Miller wrote: Hi Hal, to abandon a QSO hit the ESC key. You can also clear down the DX Call and DX grid along with QSO partner specific messages by

Bill, Should not the RR73 message contain *my* callsign in order to be valid for my report? IOW, if I'm in the middle of an exchange with P5DX and he sends G4WJS P5DX RR73, why - even as an

Hit the ESC key.

To abandon an incomplete QSO, use the F4 key. 73, Rich VE3KI

Hi Marty, thanks for the update, glad you up and running again. 73 Bill G4WJS.

Hi Jo, All installed and worked first time as expected. In FT8 mode I like the early decodes at 13.5, 11.8 and finally at 14.7 seconds. It takes a little getting used to see the decodes with out the

Hi Bart, there should be no problem with that, are you copying the file "%LocalAppData%\WSJT-X\wsjtx_log.adi" to ~/.local/share/WSJT-X/ ? 73 Bill G4WJS.

Just an observation, when double-clicking on a callsign with 2.2.0-rc1, there is a noticeable delay before the rig goes in to transmit. I switched back to the 2.1.2 version to test and compare and it

New to WSJT and like it so far. Do have one question, have not found this in the Help file. Is there a way to “CLEAR” the Transmit Msg Buffer. Say I try to work a station and due to

The issue was resolved...found the audio input cable was not seated fully in the connector and thus had loosened to a point where the audio was not fully into the computer sound card. Once seated the

I've been running WSJTX under windows for quite awhile and have a considerable log. I've recently set up Ubuntu as a dual boot and installed the linux version of WSJTX. I would like to copy my

Hello Devs, I wonder if anyone noticed this issue I reported yesterday... https://groups.io/g/WSJTX/message/9902Today I used Wireshark to see what is going on 'on the

John, While that might sound like a good reason — I am running the “international” version of Windows 10: set for the UK, with a UK keyboard, UK date format etc. and version 2.2.0-rc1 (64 bit)