Date   

locked Re: 2.2.0-rc1

Dave (NK7Z)
 

I will be happy when folks start using this in general release... It will help.

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources

On 5/11/20 6:35 PM, Herb Blue wrote:
Same here, and the real nice part is that the station on the other end is also getting deeper decodes that includes me !!!   Getting out better already so it seems.  Good stuff. 73 Herb WB8ASI
On May 11, 2020 at 9:16 PM Dave Cole < dave@... <mailto:dave@...>> wrote:


Same here, 64 bit, and I am seeing far deeper decodes than I have been
in the past... Nicely done sirs!!

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources

On 5/11/20 3:05 PM, Gary Gorniak wrote:
Installation of the 64 bit Windows version went flawlessly for me.  So
far I have seen no issues.  One thing of note is that I seem to be
decoding more signals that are close to the noise floor on the
waterfall, in the -20 to -24 range.  Just an observation so far.  I have
not quantified it.

As always, thanks to you and your team Joe for all the hard work!

73 de Gary – W9BS




locked Re: 2.2.0-rc1

Herb Blue - WB8ASI
 

Same here, and the real nice part is that the station on the other end is also getting deeper decodes that includes me !!!   Getting out better already so it seems.  Good stuff. 73 Herb WB8ASI

On May 11, 2020 at 9:16 PM Dave Cole < dave@...> wrote:


Same here, 64 bit, and I am seeing far deeper decodes than I have been
in the past... Nicely done sirs!!

73, and thanks,
Dave (NK7Z)
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources

On 5/11/20 3:05 PM, Gary Gorniak wrote:
Installation of the 64 bit Windows version went flawlessly for me.  So
far I have seen no issues.  One thing of note is that I seem to be
decoding more signals that are close to the noise floor on the
waterfall, in the -20 to -24 range.  Just an observation so far.  I have
not quantified it.

As always, thanks to you and your team Joe for all the hard work!

73 de Gary – W9BS





locked Re: 2.2.0-rc1

Dave (NK7Z)
 

Same here, 64 bit, and I am seeing far deeper decodes than I have been in the past... Nicely done sirs!!

73, and thanks,
Dave (NK7Z)
https://www.nk7z.net
ARRL Volunteer Examiner
ARRL Technical Specialist
ARRL Asst. Director, NW Division, Technical Resources

On 5/11/20 3:05 PM, Gary Gorniak wrote:
Installation of the 64 bit Windows version went flawlessly for me.  So far I have seen no issues.  One thing of note is that I seem to be decoding more signals that are close to the noise floor on the waterfall, in the -20 to -24 range.  Just an observation so far.  I have not quantified it.
As always, thanks to you and your team Joe for all the hard work!
73 de Gary – W9BS


locked Re: WSJT-X to N3FJP AC Log Interface

Jim Shorney
 

I was thinking about other things that can be done other than simply sending log data. Maybe I just have a poor concept about how it all works. I'm not at all a programmer. :D

73

-Jim
NU0C

On Mon, 11 May 2020 12:22:15 +0100
"Bill Somerville" <g4wjs@...> wrote:

You say the "mechanism as a whole" is important, I don't understand
that, surely it is the data that is relevant. E.g. your work does not
depend on how you commute, be it by public transport, walking, bicyle,
car, etc..


locked Re: MS update sent my Silicon Lab Ports and CODEC files into Hidden.

Herb Blue - WB8ASI
 

Also check Win10 Settings > Privacy and make sure Microphone is allowed to be used by WSJTX.   If your new computer and you are new to Win10, you will notice it often will try and help you in wrong ways, by changing things without your knowledge. 73 Herb WB8ASI

On May 11, 2020 at 7:48 PM Gary - AG0N < mcduffie@...> wrote:




On May 11, 2020, at 15:08, Bubba Tim < timreyes@...> wrote:

I was working FT8 this past Sat in the morning. I took a break and came back into the shack and tried to make a contact. Noticed no power was being sent. Then I got a config error. I am sure this is a MS issue. Other than a complete reformat of my lab top, any thoughts? And if I do a reformat, how can I keep this from happening again? I have tried to move back the hidden files, but ran into issue of the computer not connecting to the files. I have been working on this for 3 days.
When you checked to see what ports were assigned in WSJT-X, what did you find? Did you also check to see if the port went to sleep? That seems like a likely suspect. Power savings should be disabled on all ports, as previously mentioned on this forum a few times a week it seems.


Gary - AG0N


locked Re: MS update sent my Silicon Lab Ports and CODEC files into Hidden.

Gary - AG0N
 

On May 11, 2020, at 15:08, Bubba Tim <timreyes@...> wrote:

I was working FT8 this past Sat in the morning. I took a break and came back into the shack and tried to make a contact. Noticed no power was being sent. Then I got a config error. I am sure this is a MS issue. Other than a complete reformat of my lab top, any thoughts? And if I do a reformat, how can I keep this from happening again? I have tried to move back the hidden files, but ran into issue of the computer not connecting to the files. I have been working on this for 3 days.
When you checked to see what ports were assigned in WSJT-X, what did you find? Did you also check to see if the port went to sleep? That seems like a likely suspect. Power savings should be disabled on all ports, as previously mentioned on this forum a few times a week it seems.


Gary - AG0N


locked Re: MS update sent my Silicon Lab Ports and CODEC files into Hidden.

Herb Blue - WB8ASI
 

I'm no computer expert, so wait for others to respond.  I'm just wondering why they are hidden files?   Mine show up in Device Manager and in Control Panel Sound.  You can turn on "hidden files", but I don't remember where.  Something sounds fishy to me.  Check your Settings>Audio to be sure you Codecs are selected.  73 Herb WB8ASI

On May 11, 2020 at 5:08 PM Bubba Tim <timreyes@...> wrote:

I was working FT8 this past Sat in the morning. I took a break and came back into the shack and tried to make a contact.  Noticed no power was being sent. Then I got a config error.  I am sure this is a MS issue. Other than a complete reformat of my lab top, any thoughts?  And if I do a reformat, how can I keep this from happening again? I have tried to move back the hidden files, but ran into issue of the computer not connecting to the files. I have been working on this for 3 days. If this was not a new computer, I would just buy another...

 


locked Re: V2.2.0 rc1 error on start up (32 bit)

Bill Somerville
 

On 11/05/2020 22:38, ny2ny wrote:
just installed the new 2.2  - 32 bit version on my 64 bit W7 machine - works FB, faster decodes...
--
jay ny2ny
Hi Jay,

I'm curious as to why you would choose the 32-bit version of WSJT-X on a 64-bit system? The 64-bit version of WSJT-X has clear performance advantages.

73
Bill
G4WJS.


locked Re: v2.2.0.rc1 settings and rig control problems

Bill Somerville
 

On 11/05/2020 22:57, ktfrog007@... wrote:
Hi Bill,

I'm having settings problems with the new 2.2.0-rc1.  Both 32 bit and 64 bit behave the same. Tried both.  Have had no problems in the past.

In the following I'm running WSJT-X 2.2.0-rc1 64 bit with rig control to a Flex 6500 on Win 8.0.

Here's an example of what happens:

I've turned the 6500 output to zero, so no RFI issues.  WSJT-X Pwr set as per normal for audio drive..

I call CQ with a three minute time out.  Rig control is working.

After one or two CQs WSJT-X does a "Halt TX", disabling TX.  Much of the time this also disables the rig control and I get the "Rig Control Error" splash screen.  

I can OK that to go to the "Radio Setting" screen, OK again and I go back to the program and rig control works again. I need to hit "Enable TX" to continue.  

If I power up the 6500 and get a QSO going, WSJT-X will often disable TX again during the QSO so I have to manually re-Enable. And often I'll get the "Rig Control Error" again,

It seems settings are getting lost somehow along the way.  It's difficult to see a pattern.

Some of my "General" settings weren't carried over from 2.1.2 but once reset, they stay..

73,
Ken, AB1J

Hi Ken,

when you get a "Rig control error" message box please report the full error including the details. For your convenience you can copy the full error text including the details to the Windows clipboard simply by hitting CTRL+C while the error message box has keyboard focus (the 'X' to the right of the title bar showing with a red background). Then paste (CRTL+V) the clipboard text into a reply to this message please?

73
Bill
G4WJS.


locked Re: WSJT-X 2.2.0-rc1

Rick Hall - K5GZR
 

Re the colors of the goal posts.  I have limited color vision.  The current two colors are a step backwards from the previous choices.   Please let them be user selectable, or at least pick two that are of a contrasting brightness.  Unless I look very closely, they both look dark grey.   Thanks,  Rick - K5GZR


locked Re: v2.2.0.rc1 settings and rig control problems

Andreas Junge
 

I use the native "FlexRadio 6xxx “ driver with no problems at all. 

I use the CAT PTT.

CAT has to have the proper port setup:


And this is how it looks in WSJT-X




I hope this helps. 

73, Andreas, N6NU

On May 11, 2020, at 3:09 PM, John - AI4FR <ai4fr@...> wrote:

Ken,
    I don’t know what version of SSDR you are running but cat and dax have major issues in 2.5 and above. I’ve also found that I have less cat issues running the rig control in wsjt under kenwood ts-2000 instead of flex.
 
John / AI4FR
 
 
Sent: Monday, May 11, 2020 5:57 PM
Subject: Re: [WSJTX] v2.2.0.rc1 settings and rig control problems
 
Hi Bill,
 
I'm having settings problems with the new 2.2.0-rc1.  Both 32 bit and 64 bit behave the same. Tried both.  Have had no problems in the past.
 
In the following I'm running WSJT-X 2.2.0-rc1 64 bit with rig control to a Flex 6500 on Win 8.0.
 
Here's an example of what happens:
 
I've turned the 6500 output to zero, so no RFI issues.  WSJT-X Pwr set as per normal for audio drive..
 
I call CQ with a three minute time out.  Rig control is working.
 
After one or two CQs WSJT-X does a "Halt TX", disabling TX.  Much of the time this also disables the rig control and I get the "Rig Control Error" splash screen
 
I can OK that to go to the "Radio Setting" screen, OK again and I go back to the program and rig control works again. I need to hit "Enable TX" to continue. 
 
If I power up the 6500 and get a QSO going, WSJT-X will often disable TX again during the QSO so I have to manually re-Enable. And often I'll get the "Rig Control Error" again,
 
It seems settings are getting lost somehow along the way.  It's difficult to see a pattern.
 
Some of my "General" settings weren't carried over from 2.1.2 but once reset, they stay..
 
73,
Ken, AB1J



locked MS update sent my Silicon Lab Ports and CODEC files into Hidden.

Bubba Tim <timreyes@...>
 

I was working FT8 this past Sat in the morning. I took a break and came back into the shack and tried to make a contact.  Noticed no power was being sent. Then I got a config error.  I am sure this is a MS issue. Other than a complete reformat of my lab top, any thoughts?  And if I do a reformat, how can I keep this from happening again? I have tried to move back the hidden files, but ran into issue of the computer not connecting to the files. I have been working on this for 3 days. If this was not a new computer, I would just buy another...


locked Re: V2.2.0 rc1 error on start up (32 bit)

neil_zampella
 

Why didn't you install the 64 bit version, its actually faster than the 32 bit version, and will still work on Win7.

Neil,KN3ILZ

On 5/11/2020 5:38 PM, ny2ny wrote:
just installed the new 2.2  - 32 bit version on my 64 bit W7 machine - works FB, faster decodes...
--
jay ny2ny

    

Virus-free. www.avg.com


locked Re: WSJT-X 2.2.0-rc1

Alan James <alanmjames@...>
 

Herb, I will second that and my receive goal post is a dark green now and also hard to see because of the lack of contracting color.

73

Alan KZ6B

On Monday, May 11, 2020, 03:03:23 PM PDT, Herb Blue <wb8asi@...> wrote:


So far all is well running 2.2.0-rc1 with Log4OMv2 2.5.0.0 and JTAlert 2.16.5, on Win10 64bit.   Very quick decodes.  I need to get used to having a lot of decodes early and then the last few arriving at the end jumping the screen up.  I just need to relax more and let the screen populate.  My only suggestion thus far is to either raise the goal posts up a couple pixels so the green one has some small distance above the waterfall, or just turn the green one upside down so it stands out better.  Thanks.  Enjoying the newest version of WSJT. 73 Herb WB8ASI


locked Re: v2.2.0.rc1 settings and rig control problems

John - AI4FR
 

Ken,
    I don’t know what version of SSDR you are running but cat and dax have major issues in 2.5 and above. I’ve also found that I have less cat issues running the rig control in wsjt under kenwood ts-2000 instead of flex.
 
John / AI4FR
 
 
Sent: Monday, May 11, 2020 5:57 PM
Subject: Re: [WSJTX] v2.2.0.rc1 settings and rig control problems
 
Hi Bill,
 
I'm having settings problems with the new 2.2.0-rc1.  Both 32 bit and 64 bit behave the same. Tried both.  Have had no problems in the past.
 
In the following I'm running WSJT-X 2.2.0-rc1 64 bit with rig control to a Flex 6500 on Win 8.0.
 
Here's an example of what happens:
 
I've turned the 6500 output to zero, so no RFI issues.  WSJT-X Pwr set as per normal for audio drive..
 
I call CQ with a three minute time out.  Rig control is working.
 
After one or two CQs WSJT-X does a "Halt TX", disabling TX.  Much of the time this also disables the rig control and I get the "Rig Control Error" splash screen
 
I can OK that to go to the "Radio Setting" screen, OK again and I go back to the program and rig control works again. I need to hit "Enable TX" to continue. 
 
If I power up the 6500 and get a QSO going, WSJT-X will often disable TX again during the QSO so I have to manually re-Enable. And often I'll get the "Rig Control Error" again,
 
It seems settings are getting lost somehow along the way.  It's difficult to see a pattern.
 
Some of my "General" settings weren't carried over from 2.1.2 but once reset, they stay..
 
73,
Ken, AB1J


locked 2.2.0-rc1

Gary Gorniak
 

Installation of the 64 bit Windows version went flawlessly for me.  So far I have seen no issues.  One thing of note is that I seem to be decoding more signals that are close to the noise floor on the waterfall, in the -20 to -24 range.  Just an observation so far.  I have not quantified it.

 

As always, thanks to you and your team Joe for all the hard work!

 

73 de Gary – W9BS

 


locked Re: WSJT-X 2.2.0-rc1

Herb Blue - WB8ASI
 

So far all is well running 2.2.0-rc1 with Log4OMv2 2.5.0.0 and JTAlert 2.16.5, on Win10 64bit.   Very quick decodes.  I need to get used to having a lot of decodes early and then the last few arriving at the end jumping the screen up.  I just need to relax more and let the screen populate.  My only suggestion thus far is to either raise the goal posts up a couple pixels so the green one has some small distance above the waterfall, or just turn the green one upside down so it stands out better.  Thanks.  Enjoying the newest version of WSJT. 73 Herb WB8ASI


locked Re: v2.2.0.rc1 settings and rig control problems

Kermit Lehman
 

Hi Bill,

I'm having settings problems with the new 2.2.0-rc1.  Both 32 bit and 64 bit behave the same. Tried both.  Have had no problems in the past.

In the following I'm running WSJT-X 2.2.0-rc1 64 bit with rig control to a Flex 6500 on Win 8.0.

Here's an example of what happens:

I've turned the 6500 output to zero, so no RFI issues.  WSJT-X Pwr set as per normal for audio drive..

I call CQ with a three minute time out.  Rig control is working.

After one or two CQs WSJT-X does a "Halt TX", disabling TX.  Much of the time this also disables the rig control and I get the "Rig Control Error" splash screen.  

I can OK that to go to the "Radio Setting" screen, OK again and I go back to the program and rig control works again. I need to hit "Enable TX" to continue.  

If I power up the 6500 and get a QSO going, WSJT-X will often disable TX again during the QSO so I have to manually re-Enable. And often I'll get the "Rig Control Error" again,

It seems settings are getting lost somehow along the way.  It's difficult to see a pattern.

Some of my "General" settings weren't carried over from 2.1.2 but once reset, they stay..

73,
Ken, AB1J


locked Re: V2.2.0 rc1 error on start up (32 bit)

ny2ny
 

just installed the new 2.2  - 32 bit version on my 64 bit W7 machine - works FB, faster decodes...
--
jay ny2ny


locked Re: V2.2.0 rc1 error on start up (32 bit)

Gary - AG0N
 

On May 11, 2020, at 10:09, Bill Somerville <g4wjs@...> wrote:

Hi Bob,

ah, so not a hardware restriction, just an excuse to splash out on a shiny new rig, hi hi.

73
Bill
G4WJS.

Note to XYL: Hi Honey! Hey, it seems the Covid 19 virus has gotten into my old rig. I need to replace it right away, OK?

Gary - AG0N