Date   

locked Double Click

Bill <k2wh@...>
 

How about an option for selecting a call for transmission with a single click instead of a double click.

This would help me as I have difficulty with my fingers and possibly other hams with dexterity issues with their hands.

Just a thought.

Bill
K2WH


locked Re: Boring shift

chuckc192000@...
 

You can also specify a small font for these panes to squeeze more in (if you can read the smaller font).
--
Chuck, WB4UIH


locked Re: WSJT-X No Decode

Jim Bacher - WB8VSU
 

When that happens the first thing to do is to check your computers time by going to :  https://time.is

Jim Bacher, WB8VSU 
wb8vsu@... 
https://trc.guru

On Thu, Jan 9, 2020 at 11:33 AM, wa5tku@...
<wa5tku@...> wrote:

Something has happened to my WSJT-X setup, I no longer get Decodes.  The Waterfall has a large number of FT8 signals displayed.  The Decode button is Green,  The Audio paths have not changed.  The TX path seems to work as I hear tones with the TX audio monitor on the radio turned on.  I am running Windows 10 and just installed WSJT-X v2.1.2.  The problem started before I did that upgrade but hoped maybe it would fix the problem.  Not sure where to look next, need help?

Wes
WA5TKU


locked Re: WSJT-X on K3S

AD0DQ Tony
 

Michael, thanks for helping out your friend.
Rich, your explanation was wonderful.

AD0DQ

On Jan 9, 2020, at 1:08 AM, Michael WA7SKG <wa7skg@...> wrote:

Finally, someone who knows how to actually answer a question. Bless you, Sir. This is exactly what I was looking for. I was unaware there were multiple DATA modes.That was definitely not clear in the manuals.

Armed with this valuable information, I shall return to my friend and am confident I can now correct his configuration.

Thank you again.

73,
Michael WA7SKG


ve3ki wrote on 1/8/20 8:49 PM:
The radio should be in DATA A mode (there are four data modes - you have to select the correct one using the DATA MD button at the lower right corner of the keypad together with the VFO B knob). In DATA A, MIC SEL is set to LINE IN by default. By using DATA A, you don't have to turn compression off or adjust audio levels back and forth between phone and data modes, and you don't need to keep changing MIC SEL every time you change modes. The default filter bandwidth in DATA A is only 500 Hz, so you will have to widen it, which is a simple matter of twiddling the HI CUT and LO CUT knobs to where you want them. The filter setting is remembered.
Once you have put the K3 or K3S (they are functionally the same) into the DATA A submode on each band you use, that will be remembered on each band, and you can configure WSJT-X to use Data mode
Setting audio levels is different in Elecraft rigs from other radios - you need to adjust the audio level so the K3's ALC meter reads 4-5 bars, which indicates the onset of ALC action. Do NOT reduce the audio level to reduce transmitted power; keep the audio level sufficient to produce the required ALC meter reading and use the K3's PWR control to select the desired output power.
73,
Rich VE3KI
On Wed, Jan 8, 2020 at 09:29 PM, Michael WA7SKG wrote:
I was helping a friend set up his K3S for FT8 this afternoon. Haven't
played with one of those before, quite a challenge. Our main problem
was
getting audio into the transmitter. What finally worked was to go into
the radio menu and set MIC SEL to LINE IN. Immediately made contacts in
Florida, Russia, and Japan. PSKReporter showed reception all over the
US, Switzerland, Russia, Japan, the Carribbean, West Africa, etc. Who
says there is no propagation?
My first surprise was in the WSJT configuration, I set the mode to
Pkt/Data and it did not work. I had to set it to None. Then set the
radio to USB, not Data, and change the MIC SEL to LINE IN. It seems a
nuisance to have to go into the menu and change the MIC SEL each time
you want to move from voice to FT8. Most radios I set up, I chose the
Pkt/Data and when I select a band in the band map, it automatically
sets
the radio to DATA and audio flows properly. That does not seem to be
the
case for the Elecraft.
Did I miss something in the configuration? Surely one does not have to
go into the menu and make changes every time he wants to go from SSB
to FT8?
Any insights appreciated.
73,
Michael WA7SKG


locked WSJT-X No Decode

wa5tku@...
 

Something has happened to my WSJT-X setup, I no longer get Decodes.  The Waterfall has a large number of FT8 signals displayed.  The Decode button is Green,  The Audio paths have not changed.  The TX path seems to work as I hear tones with the TX audio monitor on the radio turned on.  I am running Windows 10 and just installed WSJT-X v2.1.2.  The problem started before I did that upgrade but hoped maybe it would fix the problem.  Not sure where to look next, need help?

Wes
WA5TKU


locked Re: Green Recieve Frequency Bracket

chmims <chmims@...>
 

Amen!

Charles KG5ZLH

On Thursday, January 9, 2020, 9:52:00 AM CST, Neil Foster <archernf@...> wrote:


Hi Dave,
I as well as others that have an issue with red/green color blindness (properly " color deficiency" ) have the same problem. Quire some time ago Joe K1JT said it would be done in an update. I sent emails to him several times and no response. I was quite surprised I know he is oine busy man. Hopefully that change can be made.
73 es gud dx
Neil Foster   N4FN


locked Re: Green Recieve Frequency Bracket

Neil Foster
 

Hi Dave,
I as well as others that have an issue with red/green color blindness (properly " color deficiency" ) have the same problem. Quire some time ago Joe K1JT said it would be done in an update. I sent emails to him several times and no response. I was quite surprised I know he is oine busy man. Hopefully that change can be made.
73 es gud dx
Neil Foster   N4FN


locked Re: configuring Icom 7610 with Micro KEYER II #WSJTX_config

Andrew OBrien
 

IF all the errors were resolved, what modes would you plan to use in WSJT-X ?  I say this because FT8 and FT4 may have changed quite a bit in versions 2.0 of WSJT-x and you will not be able to decode those modes.  I use a Icom 7610 , not with Microham but I have used Microham products in the past and can understand why you may still prefer to use it. let me know if you  need further assistance and perhamps we can sort this out.

Andy K3UK 


locked Re: FT8 configuration problem #FT8

John Morphet
 

There are a couple different ways to get WSJT-X to work with the IC-7610 radio. The most straight forward way is to connect WSJT-X direct to the IC-7610. No need to use HRD as a go between. This article on FB news describes how to set this up. The IC-7610 has it’s own internal sound card. I’d recommend that you use the internal sound card. Get the ICOM USB driver from the ICOM japan site. You don’t need and probably should not use the microHAM interface. It just adds another layer of complication. After you get WSJT-X working, you can link your favorite logging program on the “Settings > Reporting” tab.

 

John, WØZI

 

From: WSJTX@groups.io <WSJTX@groups.io> On Behalf Of capteod
Sent: Wednesday, January 8, 2020 11:25 PM
To: WSJTX@groups.io
Subject: [WSJTX] FT8 configuration problem #ft8 #Icom7610

 

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card on a Icom 7610. 

I am just returning to digital communications and am having serious problems configuring WSJTX in FT8.  My configuration is driving me crazy.  I can have FT8 decode the messages but, the JTALERT will not work.  I get three error messages which I cannot figure out how to handle.  These messages are:

Sound Card error.
     error Opening Headset Microphone (microHAM CO)
     Sound card i/o: failed 48kHz & 8kHz giving up
     See Logfile for more information

Digital Master
     Open COMDevice (COM5):
     Error Access denied

WSJT-X
     Another instance may be running
     Try to remove stale lock file?
      yes     retry     no

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card.

Any help would be appreciated, I was licensed in the 1970's and was quiet for the last 25 years and now am trying to get back in the Fraternity.  HELP ME PLEASE!!!

WB9WLV


locked Re: Boring shift

David AD4TJ
 

Guys! One very good solution to not having enough screen size: add another monitor! Buy a USB to VGA adapter, and a used computer monitor( or new, depending on your wallet ), and put some programs on one monitor, and the other on the other one. Or you can go hog-wild and add 2 monitors( maybe even more! ).

I have N1MM( or N3FJP and JTAlertX ) running on one monitor and WSJTX on the other. Very nice!

73, David AD4TJ

On Thursday, January 9, 2020, 8:48:38 AM EST, Jim Bacher - WB8VSU <wb8vsu@...> wrote:


Jean, you can adjust the size of the panes and the overall window. Mine is adjusted so I can see everything without scrolling. 

This of course requires a normal size screen. My first computer that I used for wsjt had a small screen that didn't have enough room to see everything. 

Jim Bacher, WB8VSU 
wb8vsu@... 
https://trc.guru

On Thu, Jan 9, 2020 at 5:33 AM, F8RZ
<f8rz@...> wrote:
Hello...

In "Band activity" and "Rx frequency, we must shift the text left to
read the end of the lines, which is generally the most interesting data.

Would it be possible to suppress the automatic return to the default
position on every T/R sequence ? this would avoid a number of  mouse
clicks...

Best 73 to all

F8RZ Jean


locked Re: FT8 configuration problem #FT8

Joe Subich, W4TV
 

On 2020-01-09 1:24 AM, capteod wrote:
Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a
microHAM II sound card on a Icom 7610.
First, make sure you are using the most recent version of the microHAM
control/driver software (microHAM USB Device Router).

Second, WSJT 1.9 is severely out of date - you will not be able to work
many of the current modes. I suggest updating to the current version of
WSJT-X. See: https://physics.princeton.edu/pulsar/K1JT/wsjtx.html

Sound Card error.
error Opening Headset Microphone (microHAM CO)
Sound card i/o: failed 48kHz & 8kHz giving up
See Logfile for more information
You are using the wrong input of microHAM CODEC. You should be using
*LINE (microHAM CODEC)*. Please refer to the microKEYER Users Manual
chapters "Configuring microHAM CODEC" and "Setting Audio Levels"

Digital Master
Open COMDevice (COM5):
Error Access denied
WSJT 1.9 can not share a serial port with HRD/DM. Again, use WSJT-X
and configure it to use HRD for transceiver control.

WSJT-X
Another instance may be running
Try to remove stale lock file?
yes retry no
*RESTART* your computer.

In addition to the above - you can find example configurations for
HRD and WSJT-X (each on a stand alone basis) in the MK II/MK III
area at www.microHAM-USA.com/Support.html. The MK II Users Manual
is available from the Downloads page at www.microHAM-USA.com.

73,

... Joe, W4TV


On 2020-01-09 1:24 AM, capteod wrote:
Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card on a Icom 7610.
I am just returning to digital communications and am having serious problems configuring WSJTX in FT8.  My configuration is driving me crazy.  I can have FT8 decode the messages but, the JTALERT will not work.  I get three error messages which I cannot figure out how to handle.  These messages are:
Sound Card error.
error Opening Headset Microphone (microHAM CO)
Sound card i/o: failed 48kHz & 8kHz giving up
See Logfile for more information
Digital Master
Open COMDevice (COM5):
Error Access denied
WSJT-X
Another instance may be running
Try to remove stale lock file?
yes     retry     no
Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card.
Any help would be appreciated, I was licensed in the 1970's and was quiet for the last 25 years and now am trying to get back in the Fraternity.  HELP ME PLEASE!!!
WB9WLV


locked Re: Boring shift

Jim Bacher - WB8VSU
 

Jean, you can adjust the size of the panes and the overall window. Mine is adjusted so I can see everything without scrolling. 

This of course requires a normal size screen. My first computer that I used for wsjt had a small screen that didn't have enough room to see everything. 

Jim Bacher, WB8VSU 
wb8vsu@... 
https://trc.guru

On Thu, Jan 9, 2020 at 5:33 AM, F8RZ
<f8rz@...> wrote:
Hello...

In "Band activity" and "Rx frequency, we must shift the text left to
read the end of the lines, which is generally the most interesting data.

Would it be possible to suppress the automatic return to the default
position on every T/R sequence ? this would avoid a number of  mouse
clicks...

Best 73 to all

F8RZ Jean


locked RTTY Roundup

w5ec
 

After being on FT8 for only 3 weeks, I spent a lot of this past weekend running contacts on the Roundup.
What a fun time! Thanks to this group for helping me get started in this mode.
Bill W5EC


locked Re: configuring Icom 7610 with Micro KEYER II #WSJTX_config

NC3Z
 

Any reason you are using a MicroHam with a 7610 ?? The 7610 has sound and CAT all built into 1 USB cable, in fact you can run 2 instances of WSJT-X, one for each receiver.

Also, any reason you are using WSJT 1.9 and not 2.1.2? You are a good bit behind.

--
Gary Mitchelson
NC3Z/4 Pamlico County, NC FM15
NC AHIMT COML
SHARES NCS997
NC Deputy Auxcomm Coordinator - Statewide
www.mitchelson.org


locked Re: FT8 configuration problem #FT8

Björn SM7IUN
 

First, you don't need the sound card with an IC-7610. It's all built in and accessible via the USB connector.
Secondly, do not use an old version of WSJT-X, install the latest.

If you get the "Another instance may be running" message, start the task manager and simply kill the WSJT-X process. 

Björn SM7IUN


Den tors 9 jan. 2020 kl 10:14 skrev capteod <mfgguru@...>:

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card on a Icom 7610. 

I am just returning to digital communications and am having serious problems configuring WSJTX in FT8.  My configuration is driving me crazy.  I can have FT8 decode the messages but, the JTALERT will not work.  I get three error messages which I cannot figure out how to handle.  These messages are:

Sound Card error.
     error Opening Headset Microphone (microHAM CO)
     Sound card i/o: failed 48kHz & 8kHz giving up
     See Logfile for more information

Digital Master
     Open COMDevice (COM5):
     Error Access denied

WSJT-X
     Another instance may be running
     Try to remove stale lock file?
      yes     retry     no

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card.

Any help would be appreciated, I was licensed in the 1970's and was quiet for the last 25 years and now am trying to get back in the Fraternity.  HELP ME PLEASE!!!

WB9WLV


locked Re: configuring Icom 7610 with Micro KEYER II #WSJTX_config

Dave Garber
 

first thing I would do is upgrade you version on wsjt, after installing, make sure you restart the computer


Dave Garber
VE3WEJ / VE3IE


On Thu, Jan 9, 2020 at 4:12 AM capteod <mfgguru@...> wrote:
I am just returning to digital communications and am having serious problems configuring WSJTX in FT8.  My configuration is driving me crazy.  I can have FT8 decode the messages but, the JTALERT will not work.  I get three error messages which I cannot figure out how to handle.  These messages are:

Sound Card error.
     error Opening Headset Microphone (microHAM CO)
     Sound card i/o: failed 48kHz & 8kHz giving up
     See Logfile for more information

Digital Master
     Open COMDevice (COM5):
     Error Access denied

WSJT-X
     Another instance may be running
     Try to remove stale lock file?
      yes     retry     no

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card.

Any help would be appreciated, I was licensed in the 1970's and was quiet for the last 25 years and now am trying to get back in the Fraternity.  HELP ME PLEASE!!!

WB9WLV


locked Re: Green Recieve Frequency Bracket

Karza
 

Hi Dave,

On 9.1.2020 3.55, Dave Alexander wrote:
Is there a way to make the green receive indicator a different color or make it bolder?
I have trouble seeing it.
There is no configuration item to change that indicator color.

If you are able to compile WSJT-X from sources, then you can use this patch...

__________________________________________________________________________________
diff --git a/widgets/plotter.cpp b/widgets/plotter.cpp
index badeff5..2c25219 100644
--- a/widgets/plotter.cpp
+++ b/widgets/plotter.cpp
@@ -331,6 +331,7 @@ void CPlotter::DrawOverlay()                   //DrawOverlay()
   QPen penOrange(QColor(255,165,0),3);
   QPen penGreen(Qt::green, 3);                 //Mark Tol range with green line
   QPen penRed(Qt::red, 3);                     //Mark Tx freq with red
+  QPen penBlue(Qt::blue, 3);
   QPainter painter(&m_OverlayPixmap);
   painter.initFrom(this);
   QLinearGradient gradient(0, 0, 0 ,m_h2);     //fill background with gradient
@@ -511,7 +512,8 @@ void CPlotter::DrawOverlay()                   //DrawOverlay()
       painter0.drawLine(x6,24,x6,30);
 
     } else {
-      painter0.setPen(penGreen);
+      // painter0.setPen(penGreen);
+      painter0.setPen(penBlue);
       x1=XfromFreq(m_rxFreq);
       x2=XfromFreq(m_rxFreq+bw);
       painter0.drawLine(x1,24,x1,30);
__________________________________________________________________________________

..to change the RX indicator to blue.




Perhaps the Developers might want to make this change in
next version if we asked them nicely.

BR,
Kari, oh2gqc


locked Boring shift

F8RZ
 

Hello...

In "Band activity" and "Rx frequency, we must shift the text left to read the end of the lines, which is generally the most interesting data.

Would it be possible to suppress the automatic return to the default position on every T/R sequence ? this would avoid a number of  mouse clicks...

Best 73 to all

F8RZ Jean


locked FT8 configuration problem #FT8

capteod
 

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card on a Icom 7610. 

I am just returning to digital communications and am having serious problems configuring WSJTX in FT8.  My configuration is driving me crazy.  I can have FT8 decode the messages but, the JTALERT will not work.  I get three error messages which I cannot figure out how to handle.  These messages are:

Sound Card error.
     error Opening Headset Microphone (microHAM CO)
     Sound card i/o: failed 48kHz & 8kHz giving up
     See Logfile for more information

Digital Master
     Open COMDevice (COM5):
     Error Access denied

WSJT-X
     Another instance may be running
     Try to remove stale lock file?
      yes     retry     no

Just for the record I am running WSJT 1.9 with Ham Radio Deluxe and a microHAM II sound card.

Any help would be appreciated, I was licensed in the 1970's and was quiet for the last 25 years and now am trying to get back in the Fraternity.  HELP ME PLEASE!!!

WB9WLV


locked Re: Green Recieve Frequency Bracket

Tom Ramberg, OH6VDA
 

I support the question. For the approximately 10% of males that have a green/red colour deficiency, this is a problem.

Tom OH6VDA

9. jan. 2020 kl. 03:56 skrev Dave Alexander <dave.alexander1947@...>:

Is there a way to make the green receive indicator a different color or make it bolder?
I have trouble seeing it.
Tnx
Dave
KA3PMW