Date   

locked #WSJTX_config Transmit Sound Issue / FTdx101 #WSJTX_config #linux #Yaesu

Keith
 

So, WSJTX has been just fine until just recently.  The current version receives fine, decodes incoming signals fine. First time launch, the CQ transmits fine.  Any subsequent transmission keys the rig with no transmit audio. FLDIGI and QSSTV work perfectly. Audio is set (same as FLDIGI & QSSTV) to 'default'.  Versions 2.4.0 and 2.5.0 on Ubuntu 20.04.

Suggestions?

Thanks & 73!

KI5US


locked Re: Wide Graph time slot ID text #Waterfall

W1EL Eric
 

Bill,

 

Thanks! I had increased the font size and that made it go away. Now I know!

 

73, W1EL

 

From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Bill Somerville
Sent: Tuesday, October 12, 2021 18:27
To: main@WSJTX.groups.io; WSJTX@groups.io
Subject: Re: [WSJTX] Wide Graph time slot ID text #Waterfall

 

On 12/10/2021 23:23, Bill Somerville wrote:

On 12/10/2021 23:18, W1EL Eric wrote:

Greetings,

 

I have somehow made the white text at the left side of the wide graph that identifies the time slot and band disappear.

I’ve searched the manual and the archive of this list and come up empty.

Is there a way to get it back?

 

Best Regards, Eric

 

Eric Lowell (W1EL)

Hi Eric,

increase the "N Avg" spin box value to slow down the scroll speed and leave room for the annotations.

73
Bill
G4WJS.

of course that should have been decrease the value to speed up the waterfall scrolling speed.

73
Bill
G4WJS.


locked Re: Wide Graph time slot ID text #Waterfall

Bill Somerville
 

On 12/10/2021 23:23, Bill Somerville wrote:
On 12/10/2021 23:18, W1EL Eric wrote:

Greetings,

 

I have somehow made the white text at the left side of the wide graph that identifies the time slot and band disappear.

I’ve searched the manual and the archive of this list and come up empty.

Is there a way to get it back?

 

Best Regards, Eric

 

Eric Lowell (W1EL)

Hi Eric,

increase the "N Avg" spin box value to slow down the scroll speed and leave room for the annotations.

73
Bill
G4WJS.

of course that should have been decrease the value to speed up the waterfall scrolling speed.

73
Bill
G4WJS.


locked Re: Wide Graph time slot ID text #Waterfall

Bill Somerville
 

On 12/10/2021 23:18, W1EL Eric wrote:

Greetings,

 

I have somehow made the white text at the left side of the wide graph that identifies the time slot and band disappear.

I’ve searched the manual and the archive of this list and come up empty.

Is there a way to get it back?

 

Best Regards, Eric

 

Eric Lowell (W1EL)

Hi Eric,

increase the "N Avg" spin box value to slow down the scroll speed and leave room for the annotations.

73
Bill
G4WJS.


locked Wide Graph time slot ID text #Waterfall

W1EL Eric
 

Greetings,

 

I have somehow made the white text at the left side of the wide graph that identifies the time slot and band disappear.

I’ve searched the manual and the archive of this list and come up empty.

Is there a way to get it back?

 

Best Regards, Eric

 

Eric Lowell (W1EL)

48 Loon Rd

Wesley, ME 04686

 

 


locked Re: Frequency display RED showing 00000 at TX #Yaesu

Nico Ebbendorf
 

fixed the problem!

In the setup menu, the Split Operation was set to "None" (since I do not want to operate in split for digital modes). Set this to the option "Rig" solved the issue with the ooB en 0,000 reading.
Obviously, I do not understand the selectings in this menu but it is working as expected now.
Thank you Dave and Kari for your support.

73,
Nico PA3ADU


locked Re: Frequency display RED showing 00000 at TX #Yaesu

Nico Ebbendorf
 

Yes, I use Omni-rig with Log4om. I think that I have to look deeper into Omni-rig. Kari has a valid point to check for possible Omnig-rig support.
Thanks,
73, Nico PA3ADU


locked Rig control error from Hamlib #Cat_RigControl #macOS #Elecraft

 

I recently had my shack completely torn down to have basement waterproofing  I disconnected everything, marked all the connectors and put it all away for safekeeping.

 

Now I have everything set up again, and trying to get it running correctly. It's all going well, RUMlog is working properly, but WSJT-X is another story.

 

The rig is a 7.5-year old Elecraft K3 and the computer is a MacBook Pro running MacOS 11.6 Big Sur. When I try to start up and run in FT8, the rig immediately goes key-down and I get this Hamlib error:

 

Rig failure

 

Hamlib error: Command rejected by the rig

k3.c(1171):k3_set_mode return(-9)

rig_set_mode: targetable retcode after set_mode=-9

rig.c(2200):rig_set_mode return(-9) while setting current VFO mode

 

Timestamp: 2021-10-12T16:56:20 316Z


In the "Radio" panel in Preferences, the "Test PTT' is red and continuous until the K3 times out with a ERR PTT display.

Under the PTT button, there is this error message:

Attempt to activate the transmitter.

Click again to deactivate. Normally no power should be output since there is no audio being generated at this time. Check that any Tx indication on your radio and/or your radio interface behave as expected.


It's right, there is no power being output, it's just closing the PTT circuit, apparently.

 

I've checked cables, ports, everything I can think of and can't determine a solution.

 

Thanks for any help.

John K8AJS
jbastin1@...

 


locked Re: Fast Graph waterfall presentation #MSK144

John
 

Thanks Reino.  I should have been able to figure that out, but somehow I didn't.  Maybe old age is taking a toll on me!

John,  W0GN

On 2021-10-12 7:56 am, Reino Talarmo wrote:

>What puzzles me is that as I vary the frequency of the receiver the line displayed by the waterfall moves up and down.  If the horizontal axis of the display is time and the vertical axis is signal amplitude, the indication is that the audio response of my receiver is not at all flat.  However, the receiver response is set to be over 3 KHz and the audio amplitude from the speaker sounds pretty flat.

What am I missing?

John,  W0GN

Hi John,

The vertical axis is audio frequency. Basically it is waterfall as in FT8, but turned 90 degrees. What you see is a carrier frequency you are receiving. If you change frequency to an FT8 frequency you should see multiple horizontal lines. on a busy band.

73, Reino OH3mA






locked Re: S.O.S #adiFiles

Bill Somerville
 

Hi Thomas,

the file is not hidden. If you use "Menu->File->Open log directory" you will see the file there. Windows may be hiding the file extension, which can be very confusing. If file extensions are hidden then there will be another column in the directory listing showing the file type, that should show ADI, if it shows as TXT then you have probably saved the file in Notepad.exe or similar which has renamed the file as wsjtx_log.adi.txt , if so you need to get rid of the ".txt" on the end.

73
Bill
G4WJS.

On 12/10/2021 15:18, Thomas Testa via groups.io wrote:
Hi Phil I did what you suggested but the program isn’t reading the ADI file on startup. I am trying to remember how to get my file explorer on WINDOWS 7 to show the hidden. wsjt_log. ADI file.




On Tuesday, October 12, 2021, 3:13 AM, Philip Rose via groups.io <gm3zza@...> wrote:

On WSJT-X File->open log directory. Copy and paste the external log into that directory.

 

73 Phil GM3ZZA

 

Sent from Mail for Windows

 

From: Thomas Testa via groups.io
Sent: 12 October 2021 07:30
To: main@WSJTX.groups.io
Subject: [WSJTX] S.O.S #adiFiles

 

My main computer crashed and I lost everything for WSJTX..  I had my log backed up to a ADI file on a external drive.I have 
installed WSJT on a  back up system but  I cannot remember how to get my log back into WSJT X. 

                                                                                            TNX Tom,N2UFM

 


--
73 Phil GM3ZZA



locked Re: S.O.S #adiFiles

Thomas Testa
 

Hi Phil I did what you suggested but the program isn’t reading the ADI file on startup. I am trying to remember how to get my file explorer on WINDOWS 7 to show the hidden. wsjt_log. ADI file.




On Tuesday, October 12, 2021, 3:13 AM, Philip Rose via groups.io <gm3zza@...> wrote:

On WSJT-X File->open log directory. Copy and paste the external log into that directory.

 

73 Phil GM3ZZA

 

Sent from Mail for Windows

 

From: Thomas Testa via groups.io
Sent: 12 October 2021 07:30
To: main@WSJTX.groups.io
Subject: [WSJTX] S.O.S #adiFiles

 

My main computer crashed and I lost everything for WSJTX..  I had my log backed up to a ADI file on a external drive.I have 
installed WSJT on a  back up system but  I cannot remember how to get my log back into WSJT X. 

                                                                                            TNX Tom,N2UFM

 


--
73 Phil GM3ZZA




locked Re: Fast Graph waterfall presentation #MSK144

Reino Talarmo
 

>What puzzles me is that as I vary the frequency of the receiver the line displayed by the waterfall moves up and down.  If the horizontal axis of the display is time and the vertical axis is signal amplitude, the indication is that the audio response of my receiver is not at all flat.  However, the receiver response is set to be over 3 KHz and the audio amplitude from the speaker sounds pretty flat.

What am I missing?

John,  W0GN

Hi John,

The vertical axis is audio frequency. Basically it is waterfall as in FT8, but turned 90 degrees. What you see is a carrier frequency you are receiving. If you change frequency to an FT8 frequency you should see multiple horizontal lines. on a busy band.

73, Reino OH3mA


locked Re: Frequency display RED showing 00000 at TX #Yaesu

Dave Garber
 

is omni rig being used by another app?  I use for log4om, but wsjt works directly, on a created port..


Dave Garber
VE3WEJ / VE3IE


On Mon, Oct 11, 2021 at 12:43 PM Nico Ebbendorf <n.ebbendorf@...> wrote:
I think you mean the frequency tab in the setup menu. This menu, I have not touched and is still as the original installation.
Also, when I am not using Omni-Rig, everything is working as expected. So there is something going on between WSJT and Omni-Rig

Nico PA3ADU



locked Fast Graph waterfall presentation #MSK144

John
 

I am puzzled by the waterfall display in MSK144.  A line is displayed that seemingly indicates a signal of constant amplitude.  When conditions are quiet I can hear an audio beat note that changes as my receiver frequency is slowly changed.

What puzzles me is that as I vary the frequency of the receiver the line displayed by the waterfall moves up and down.  If the horizontal axis of the display is time and the vertical axis is signal amplitude, the indication is that the audio response of my receiver is not at all flat.  However, the receiver response is set to be over 3 KHz and the audio amplitude from the speaker sounds pretty flat.

What am I missing?

John,  W0GN


locked Re: S.O.S #adiFiles

 

On WSJT-X File->open log directory. Copy and paste the external log into that directory.

 

73 Phil GM3ZZA

 

Sent from Mail for Windows

 

From: Thomas Testa via groups.io
Sent: 12 October 2021 07:30
To: main@WSJTX.groups.io
Subject: [WSJTX] S.O.S #adiFiles

 

My main computer crashed and I lost everything for WSJTX..  I had my log backed up to a ADI file on a external drive.I have 
installed WSJT on a  back up system but  I cannot remember how to get my log back into WSJT X. 

                                                                                            TNX Tom,N2UFM

 


--
73 Phil GM3ZZA


Thomas Testa
 

My main computer crashed and I lost everything for WSJTX..  I had my log backed up to a ADI file on a external drive.I have 
installed WSJT on a  back up system but  I cannot remember how to get my log back into WSJT X. 

                                                                                            TNX Tom,N2UFM


locked Re: Frequency display RED showing 00000 at TX #Yaesu

Karza
 

OM Nico,

On 11.10.2021 19.43, Nico Ebbendorf wrote:
<clip>. Also, when I am not using Omni-Rig, everything is working as expected.  So there is something going on between WSJT and Omni-Rig
If everything works with WSJT-X directly, then perhaps you should take your issue up with OmniRig support [if any such support exists]?

73's de Kari, oh2gqc


locked Re: Frequency display RED showing 00000 at TX #Yaesu

Nico Ebbendorf
 

I think you mean the frequency tab in the setup menu. This menu, I have not touched and is still as the original installation.
Also, when I am not using Omni-Rig, everything is working as expected. So there is something going on between WSJT and Omni-Rig

Nico PA3ADU


locked Re: Frequency display RED showing 00000 at TX #Yaesu

Dave Garber
 

have you done a reset on the frequencies tab of wsjt?  
Dave Garber
VE3WEJ / VE3IE


On Mon, Oct 11, 2021 at 6:31 AM Nico Ebbendorf <n.ebbendorf@...> wrote:
Thank you Dave for your comment.
The FT897 is set in the VFO mode.
I tried to understand the responce on the spilt / non- split mode and found out that when I select the SPL mode in the FT897 I got the correct behaviour for WSJT. This even when I set the VFO-B completely outside the FT8 range (VFO-B at 7.15 MHZ at TX). It is ok when I press A=B and both VFO's are at the same freq. but I still have to select SPL otherwise WSJT shows "ooB" and 0,000 in red on the freq. display.

Tried a factory reset of the FT897 but still the same results, Works fine in SPL but ooB when in VFO-A mode...
btw, I don't have this issue when driving the FT897 directly without OmniRig,

Nico
PA3ADU



locked Re: Working split

Roger
 

I'm not happy with the language used in this thread earlier today and have just deleted a message with intemperate language. I will close this thread if it happens again.

I know some members have strong views on certain operating practices but that is not an excuse for lowering the standards of discussion.

I expect all views to be stated in a respectful and polite manner.

73
Roger
GW4HZA
moderator

7701 - 7720 of 36837