main@WSJTX.groups.io

Re: Modes and Submodes with Frequencies for 6M #Q65

Michel Bernard VE2BJG

#25960

I have this. A cut/paste table from various sites.

Far from complete I guess but a start.

73 Michel

Modes VHF.xlsx

Re: Version 2.4.0 ate my adi file #IssueReport #logging

Julian Topolski

#25959

Log recovered with the help of Paul, G4IJE. Thanks to all who responded.

Modes and Submodes with Frequencies for 6M #Q65

Bobby Chandler

#25958

Is there a list of 6M frequencies with modes and submodes listed anywhere?
Sure would like to try some of them. I know about 50.275 for 30A and 50.235
for 120E. Any others. I see some reported on 50.267 but no luck for me.

Bobby/N4AU

Re: Can hamlib for Windows be used? #Cat_RigControl

Bill Somerville

#25957

On 19/06/2021 15:59, Fred Cole wrote:
Bill,

I got my answer in the Facebook group. All I needed to do was select "hamlib NET rigctl" in the "Radio" tab, to utilize rigctld. Log4OM can also talk to rigctld in its CAT control. I had been so focused on picking which rig, I never noticed the option for rigctl in the dropdown list. Hi Fred,

OK, understood. I was not aware that Log4OM had support for Hamlib. Yes that is a good configuration with those applications.

73
Bill
G4WJS.

Re: Can hamlib for Windows be used? #Cat_RigControl

Fred Cole

#25956

Bill,

I got my answer in the Facebook group. All I needed to do was select "hamlib NET rigctl" in the "Radio" tab, to utilize rigctld. Log4OM can also talk to rigctld in its CAT control. I had been so focused on picking which rig, I never noticed the option for rigctl in the dropdown list.

Re: Can hamlib for Windows be used? #Cat_RigControl

Bill Somerville

#25955

On 19/06/2021 04:51, Fred Cole wrote:
I asked this on the Facebook group, but this question may be better suited here. Can WSJT-X on Windows 10 be configured to use hamlib/rigctld on the same machine, instead of its internal? What I would like to do is be able to have Log4OM running and be able to switch between apps like FLdigi, WSJT-X, and voice and still have Log4OM track the frequency. The same thing, I suppose, can be done with Omnirig but I've tried that and I couldn't get it to work. My guess is that it would require me to compile from source, a task I would have to learn under Windows. I can muddle through compiling on Linux so that won't hurt my brain too much.

Fred - N2NRV Fred,

I do not understand what you are asking, can you clarify please? Log4OM is not compatabile with Hamlib AFAIK so you can use Hamlib to control your rig, or you can use Log4OM to control you rig. To have both involved would need a different arrangement.

73
Bill
G4WJS.

Can hamlib for Windows be used? #Cat_RigControl

Fred Cole

#25954

I asked this on the Facebook group, but this question may be better suited here. Can WSJT-X on Windows 10 be configured to use hamlib/rigctld on the same machine, instead of its internal? What I would like to do is be able to have Log4OM running and be able to switch between apps like FLdigi, WSJT-X, and voice and still have Log4OM track the frequency. The same thing, I suppose, can be done with Omnirig but I've tried that and I couldn't get it to work. My guess is that it would require me to compile from source, a task I would have to learn under Windows. I can muddle through compiling on Linux so that won't hurt my brain too much.

Fred - N2NRV

Re: ALL.TXT Append Error #FT8 #IssueReport

Jeff Young

#25953

Further investigation. The error window appears as the latest decodes are being posted to the left window. I have removed McAfee LiveSafe from the computer and am only using the windows 10 built in security. I have excluded the entire folder where the logs files exist in the appdata/local/WSJT-X folder. I am only running Version 2.3.1 without JT-Alert and ACLog. Sometimes the error windows are 18 screens deep.

Re: WSJT-X 2.4.0 rc-2 Subprocess Error #wsjt-x-crashing EXIT CODE 2 #wsjt-x-crashing

George J Molnar, KF2T

#25952

You might consider installing the release version of the software, as the rc versions are expired.

Re: FT991A and MacOS #WSJTX_config #AudioIssues #macOS #NewUser

Bill Somerville

#25951

Hi Jeremy,

have you assigned the necessary rig USB audio codec devices to the new aggregate device?

73
Bill
G4WJS.

Show quoted text

On 18/06/2021 15:53, Jeremy Stark via groups.io wrote:

I created an aggregate device, and selected it in WSJT-X. I can hear there are signals present on the radio, but the software is not showing anything.

--

Jeremy

G7BHB

On 17 Jun 2021, at 08:57, Bill Somerville <g4wjs@...> wrote:

Hi Jeff, and Jeremy,

you can get more certainty of audio device naming and selection on macOS by creating an aggregate audio device, then assign your rig's audio devices to it. You can name the aggregate device as to desire, and select that in WSJT-X. This is most useful when you have multiple rigs with in-built USB audio codecs, but can of course be used with a single radio as well.

73
Bill
G4WJS.

#Cat_RigControl #error #Cat_RigControl #IssueReport

mattwood2000@...

#25950

Hi all,

I'm running into some rig control errors and I'm wondering if anyone
has successfully used rigctld and remote (localhost or network)
operation?

My rig is an FT-897D.  WSJT-x works perfectly fine when I directly
connect to the rig over the serial port, but I get errors (ERR_IO, -6)
when running rigctld-wsjtx with the same parameters and set the
program to use HamLib NET 2.  I've tried the 4.2 release, the
integration release as well as the master branch of the code, all with
the same results.

Most of the time, wsjt-x comes up and reads the VFO and everything
looks good, but as soon as I try to test the CAT or PTT it errors out.

I realize this may be more of a hamlib issue, but figured I'd start here first.

Thanks, Matt.
N1YQE

Re: FT991A and MacOS #WSJTX_config #AudioIssues #macOS #NewUser

Jeremy Stark

#25949

I created an aggregate device, and selected it in WSJT-X. I can hear there are signals present on the radio, but the software is not showing anything.

--

Jeremy

G7BHB

Show quoted text

On 17 Jun 2021, at 08:57, Bill Somerville <g4wjs@...> wrote:

Hi Jeff, and Jeremy,

you can get more certainty of audio device naming and selection on macOS by creating an aggregate audio device, then assign your rig's audio devices to it. You can name the aggregate device as to desire, and select that in WSJT-X. This is most useful when you have multiple rigs with in-built USB audio codecs, but can of course be used with a single radio as well.

73
Bill
G4WJS.

Re: ALL.TXT Append Error #FT8 #IssueReport

Jeff Young

#25948

Bill:

I am running wsjt-x, jt-alert and N3FJP AC Log.

Jeff

Re: WSJT-X 2.4.0 rc-2 Subprocess Error #wsjt-x-crashing EXIT CODE 2 #wsjt-x-crashing

Bill Somerville

#25947

On 18/06/2021 02:01, Niece KA1ULN wrote:
i have had  this for  over  7 days now.....   what is  the  solution or  temp fix.. i cannot even use my wsjtx.

I AM  GETTING THE  SAME  ERROR   subprocess failed with exit  code 2. Niece,

please include the full error message, including details, and the version of WSJT-X you are using?

73
Bill
G4WJS.

Re: WSJT-X 2.4.0 rc-2 Subprocess Error #wsjt-x-crashing EXIT CODE 2 #wsjt-x-crashing

Niece KA1ULN <ka1uln1@...>

#25946

i have had this for over 7 days now..... what is the solution or temp fix.. i cannot even use my wsjtx.

I AM GETTING THE SAME ERROR subprocess failed with exit code 2.

Re: [EXTERNAL] Re: [WSJTX] Cannot use /P in callsign when using JT65 and JT9 modes #JT9 #IssueReport #JT65

Hattori, Yoshihisa

#25945

We might be talking about something different.

Decode a sig from /P station. (ex. G4WJS/P)
Double click on the decode to generate the message, or populate the DX call manually then click on generate standard message, which will result TX1 without GL. (i.e. G4WJS/P JO1LVZ. Note: This does not occur in FT8.)
If I send the message as it is, DX will receive G4WJS/P <…> so that he will not know who is calling.

The only solution at this moment is manually add my GL to TX1. (i.e. TX1 with GL is mandatory to make the protocol work.)

It was originally reported to wsjt-devel back in Mar, too.

All the issues could be fixed by adding GL correctly in TX1 when standard message is generated. (not exactly sure though.)

Hatt/JO1LVZ

Show quoted text

From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Bill Somerville
Sent: Thursday, June 17, 2021 5:12 PM
To: main@WSJTX.groups.io
Subject: Re: [EXTERNAL] Re: [WSJTX] Cannot use /P in callsign when using JT65 and JT9 modes #JT65 #JT9 #BugReport

Hi Hatt-san,

are you sure? The Q65 mode uses a 77-bit payload with a different message source encoding scheme that allows messages like:

G4WJS/P JO1LVZ/P R-10

so the problem does not occur for that mode.

73
Bill
G4WJS.

On 17/06/2021 03:01, Hattori, Yoshihisa wrote:

Bill,

This also happens to Q65, so please make sure the issue gets fixed for that mode, too.

Thanks.

Hatt/JO1LVZ

From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Bill Somerville
Sent: Wednesday, June 16, 2021 6:42 PM
To: main@WSJTX.groups.io
Subject: [EXTERNAL] Re: [WSJTX] Cannot use /P in callsign when using JT65 and JT9 modes #JT65 #JT9 #BugReport

[CAUTION] This email originated from outside Travelport. Do not click links or open attachments unless you recognize the sender and know the content is safe.

On 16/06/2021 10:23, Jim Brown wrote:

On 6/16/2021 1:10 AM, Panos wrote:

Hi Bill, thanks I am waiting for it 73

I am not. Just like on all other bands and modes, the definition of a QSO is the ack of receipt of two pieces if information from the other party. When I copy RRR or RR73, I log the QSO, because I've already sent R plus a report, and the fact that he's sent me RRR or RR73 indicates he's copied my R-report. If he sends RR73 or R and his report again, it tells me he hasn't copied my R, so I send it again. And again, if he keeps sending. He can log it when he's satisfied. When he stops sending his report, I log it. If he doesn't, we don't have a QSO. It's that simple. And for skeds, like online, it's perfeectly legit for the guy getting RRR or RR73 to say so online, like Slack or ON4KST or Ping Jockey. This is VERY common practice when working grid expeditions.

73, Jim K9YC

Jim,

this issue is about operating with a /P or other type 1 prefix or suffix in JT65 mode (same applies to JT9 and JT4 modes), the defect means it is not possible to send a signal report, RRR or 73 message unless the generated messages are manually edited. The defect is a regression that happened some considerable time ago and it needs to be fixed, which is what I am doing.

73
Bill
G4WJS.

Re: ALL.TXT Append Error #FT8 #IssueReport

Dave Garber

#25944

if you open the log folder in wsjt, does the all.txt show in there with the other files.

is the folder you state a typo folder ..../wjt-x/...

Dave Garber

VE3WEJ / VE3IE

Show quoted text

On Thu, Jun 17, 2021 at 4:14 PM Jeff Young <kb3hf@...> wrote:

I keep getting this error whale running FT8. "Cannot open C:/Users/…./WJT-X/ALL.TXT for append: The process cannot access the file because it is being used by another process."

I have excluded ALL.TXT from scanning and turned off indexing in properties.

Running Win 10, WSJT-X Version 2.3.1

Re: #FT8 Not Possible to sign portable? #FT8 #wsjt-x

Jim Brown

#25943

On 6/17/2021 10:03 AM, robert scott wrote:
I will operating from a different Call Area and wanted to sign WR3Y/7Why? I've lived in W6 for 15 years, and the only times I've ever used /6 was on 6M CW when the band was open, so that callers wouldn't turn their beams in the wrong direction. That issue is covered by the normal inclusion of our grid in a CQ.

73, Jim K9YC

VS: [WSJTX] #FT8 Not Possible to sign portable? #FT8 #wsjt-x

Reino Talarmo

#25942

Hi Rob,

You may try it. I did and it is working, but program is using hash for the other or for your call. That’s fine. Only difficulty is that you cannot work other stations using special call signs. It fills the message correctly, but leave at transmission out e,g, “R-01” and sends only the call signs (one hashed).

73, Reino OH3mA

Lähettäjä: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] Puolesta robert scott
Lähetetty: 17 June 2021 20:03
Vastaanottaja: main@WSJTX.groups.io
Aihe: [WSJTX] #FT8 Not Possible to sign portable? #wsjt-x

I will operating from a different Call Area and wanted to sign WR3Y/7. I was told that wsjt-x will not pick up appending my call/7 ? I will of course be signing with the correct grid square. Is that true?

TU
Rob
WR3Y

Re: ALL.TXT Append Error #FT8 #IssueReport

Bill Somerville

#25941

On 17/06/2021 17:20, Jeff Young wrote:

I keep getting this error whale running FT8. "Cannot open C:/Users/…./WJT-X/ALL.TXT for append: The process cannot access the file because it is being used by another process."

I have excluded ALL.TXT from scanning and turned off indexing in properties.

Running Win 10, WSJT-X Version 2.3.1

Hi Jeff,

are you running any other ham radio software that might possibly be trying to scan the WSJT-X ADIF log for QSOs?

73
Bill
G4WJS.