|
K5DOG
With some additional activity, I see now that the colon in the Message window (Message3.png) is an indicator of Q65 decodes.
Perhaps a color change could be substituted. Thanks
|
|
|
|
On 13/06/2021 16:31, AB2ZY wrote:
This is not clicking in the waterfall. It is double clicking on a CQ in the decode list. With the latest release the "Hold Tx Freq" checkbox acts like it is always checked.Hi Al, does you rig require you to have the option "Settings->General->Allow Tx frequency changes while transmitting" unchecked? If that is the case then frequency changes will be blocked if attempting to do so while transmitting. 73 Bill G4WJS.
|
|
|
|
AB2ZY
This is not clicking in the waterfall. It is double clicking on a CQ in the decode list. With the latest release the "Hold Tx Freq" checkbox acts like it is always checked.
I have to be very quick to click the "set Tx freq to Rx freq" button when I wish to respond to a CQ simplex. Al AB2ZY
|
|
|
|
locked
Re: 2.5.0 RC1 - No receive after transmit - rig control disables RX on Yaesu FTDX-3000 VFO A running split
#IssueReport
Denny WB8K
So far unchecking "allow frequency change during transmit" seems to have cured the problem with "fake it" and the radio switching back to original frequency.
Ftdx101MP WSJT-x v2.4.0 c19d62 Windows 10 73, Denny - WB8K
|
|
|
|
locked
Goalpost in NA VHF Contest
#ContestMode
Bobby Chandler
My TX goalpost doesn't move to the calling stations frequency when I tick
|
|
|
|
locked
Re: After upgrade to WSJT-X 2.4.0, an IC-7600 no longer changes bands on SPE Expert 1K-FA power amplifier
#Cat_RigControl
Frode Igland
Bill, Responding to your reply in digest #1862, my friend has now reported on his "Split Operation" settings in WSJT-X 2.4.0 GA. He has used "Fake it" for years with no problems, and used he same when he upgraded to v2.4.0 GA and the PA immediately stopped following WSJT-X and IC-7600 band changes. He has now tried with both "Rig" and "None", and there is no difference. The PA still does not follow the band changes unless it gets a "Tune" signal. As mentioned earlier, I have used v2.4.0 GA on the exact same setup, an IC-7600 and an SPE Expert 1K-FA PA without any problems with band changes, so this is works for some. 73, Frode LA6VQ
|
|
|
|
Mark Sunderlin
The ReadMe.txt file that comes with WSJT-X, 2.4 for Mac says to run the command. 'sysctl -a | grep sysv.shm' and says. "If shmmax is not shown as 52428800 contact me ..."
When I run that command, I get shmmax: 104857600 This is exactly double what the ReadMe.txt file suggests. I suspect 104,857,600 is correct as I see multiple references to that number as "the right" number here in various messages from the group ... So maybe this is just outdated docs? The program seems to run just fine on my Catalina 10.15.7 Mac ....
|
|
|
|
locked
Re: Where to delete previously worked station data
#ContestMode
#logging
#FT8
Jim Brown
Last I looked, there was a "Getting Started" doc on the N1MM+ website for use with WSJT-X.
toggle quoted messageShow quoted text
73, Jim K9YC
On 6/12/2021 6:07 PM, Bob Turner wrote:
I don't see that functionality when N1MM launches WSJTx. I am running WSJTx from inside N1MM. N1MM knows about the WSJTx contacts but the reverse is not true. I do a File Open log directory and erase WSJTx logs there. Once the WSJTx logs are erased everything is new. It's still possible to get a dup if you worked them on phone and logged directly to N1MM as WSJTx does not know about N1MM contacts, it only knows the contacts it made.
|
|
|
|
Reino Talarmo
Well I have it keying the radio again and now I have a different quirk as I do not get any replies, I believe a reply would be WX0XXX KD9DOG there ID then mine is that correct?
Hi Jim, I assume that you have looked into The User Guide. In section 7.1. Standard Exchange is a nice presentation what you should see. Normally you will see after your call sign either a locator or signal report. For further help we need to know something more e.g.: 73, Reino OH3mA
|
|
|
|
Chuck Eglhaut <ceglhaut@...>
Tried to connect Xiegu G90 to my computer. I had it working on UBITX and IC-718. But I tried connecting to G90 I don’t have Any DB showing on the DB chart on left and no signals in the waterfall or in the left hand screen next to transmitted messages. I using Ham Radio Deluxe. I tried Xiegu Ce-19 plus the USB cable I got with the radio. I don’t think I am getting a signal from my receive to the computer. I am using windows 10.and WSJT 2.4
|
|
|
|
Reino Talarmo
Just upgraded to 2.4.0. Using w/N1MM at the moment.
Hi Al, For CQ set both RX and TX frequencies to the same spot using Ctrl+click on waterfall. Tx follows Rx only, when you answer somebody on a Rx frequency by double clicking, I think. 73, Reino OH3mA
|
|
|
|
locked
Re: Where to delete previously worked station data
#ContestMode
#logging
#FT8
ve3ki
Do you have N1MM+'s WSJT Decode List window open? That window transfers dupe and multiplier information from N1MM+ back to WSJT-X. The dupe/multiplier status is indicated by the background color for the callsign only (not for the entire line) in CQ lines in the WSJT-X Band Activity window. A background color of red behind the callsign means a new multiplier, a background color of blue behind the callsign means a new QSO but not a dupe, and a background color of grey behind the callsign means the contact is a dupe. N1MM+ evaluates dupe/multiplier status for all contacts in the current contest log, regardless of mode, so stations you have worked in other modes on the same band have a grey background. The same information is also displayed directly in the N1MM+ Decode List window.
toggle quoted messageShow quoted text
73, Rich VE3KI
On Sat, Jun 12, 2021 at 09:32 PM, Bob Turner wrote:
I don't see that functionality when N1MM launches WSJTx. I am running WSJTx from inside N1MM. N1MM knows about the WSJTx contacts but the reverse is not true. I do a File Open log directory and erase WSJTx logs there. Once the WSJTx logs are erased everything is new. It's still possible to get a dup if you worked them on phone and logged directly to N1MM as WSJTx does not know about N1MM contacts, it only knows the contacts it made.
|
|
|
|
locked
Re: Where to delete previously worked station data
#ContestMode
#logging
#FT8
Bob Turner
I don't see that functionality when N1MM launches WSJTx. I am running WSJTx from inside N1MM. N1MM knows about the WSJTx contacts but the reverse is not true. I do a File Open log directory and erase WSJTx logs there. Once the WSJTx logs are erased everything is new. It's still possible to get a dup if you worked them on phone and logged directly to N1MM as WSJTx does not know about N1MM contacts, it only knows the contacts it made.
toggle quoted messageShow quoted text
7 3 Bob N2SCJ
-----Original Message-----
From: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] On Behalf Of Jim Brown Sent: Saturday, June 12, 2021 6:20 PM To: main@WSJTX.groups.io Subject: Re: [WSJTX] Where to delete previously worked station data #ContestMode #logging #FT8 #logging On 6/12/2021 12:54 PM, Joe Barkley wrote: Hi all I am trying to eliminate stations from being grayed out in theUse a Contest Logger, like N1MM (free) or WriteLog (not free). An important thing that they do is keep track of dupes. 73, Jim K9YC
|
|
|
|
wisconsinjimmy <algot1901@...>
Well I have it keying the radio again and now I have a different quirk as I do not get any replies, I believe a reply would be WX0XXX KD9DOG there ID then mine is that correct?
|
|
|
|
locked
Re: Where to delete previously worked station data
#ContestMode
#logging
#FT8
Jim Brown
On 6/12/2021 12:54 PM, Joe Barkley wrote:
Hi all I am trying to eliminate stations from being grayed out in the decode window during the contest which I assume comes from the station's I have previously worked. It would be nice to lose that data during the contest but then retrieve it afterwards. I have been trying by renaming the log but that doesn't seem to do it. Any ideas?Use a Contest Logger, like N1MM (free) or WriteLog (not free). An important thing that they do is keep track of dupes. 73, Jim K9YC
|
|
|
|
locked
Re: Where to delete previously worked station data
#ContestMode
#logging
#FT8
Joe Barkley
I'm using n3fjp and jt alert.. I just had to make a new log and restart everything else seems to be well
Hi all I am trying to eliminate stations from being grayed out in the decode window during the contest which I assume comes from the station's I have previously worked. It would be nice to lose that data during the contest but then retrieve it afterwards. I have been trying by renaming the log but that doesn't seem to do it. Any ideas? Didn't think of this prior to the contest starting but thanks for any information. 73 Joe KI4TZ running 2.3.1
|
|
|
|
locked
Re: Where to delete previously worked station data
#ContestMode
#logging
#FT8
Joe Barkley
Okay I think I figured it out.
Hi all I am trying to eliminate stations from being grayed out in the decode window during the contest which I assume comes from the station's I have previously worked. It would be nice to lose that data during the contest but then retrieve it afterwards. I have been trying by renaming the log but that doesn't seem to do it. Any ideas? Didn't think of this prior to the contest starting but thanks for any information. 73 Joe KI4TZ running 2.3.1
|
|
|
|
locked
#Cat_RigControl
#Cat_RigControl
wisconsinjimmy <algot1901@...>
Well here I go again trying to figure out what this means, I am thinking it has to do with the ports now to redo the whole settings and try and get a green cat button. Is this telling me I have a problem with the port?
|
|
|
|
bill.neuro
Sounds like you need ferrite beads on your headset cable. Bill K1NS Sent from my T-Mobile 5G Device
-------- Original message -------- From: k0bwj@... Date: 6/12/21 3:36 PM (GMT-05:00) To: main@WSJTX.groups.io Subject: [WSJTX] Signal indications each side of center on FTDX-10 Frequency Waterfall #txaudio Bruce K0BWJ
|
|
|
|
Reino Talarmo
I'm looking for suggestions regarding contest logging. I've read the thread on resetting the Cabrillo log; that's not my problem. What I want is to be able to ignore history prior to the contest, but check for dupes during the contest. Do I need to create new logs? If so, which ones? Thanx much! 73 Don NA6Z
Hi Don, If you want to run barefoot, then you could use Cabrillo log for logging and wsjtx_log.adi for dupes checking. You already know how to reset Cabrillo part of the job. The ignoring of the history happens by renaming the wsjtx_log.adi file (so that it will be available after the contest), closing wsjt-x and opening it. At that point wsjt-x cannot find a wsjtx_log.adi and so there is no history stored into the program memory. When you log the first contact, then wsjt-x generates a new wsjtx_log.adi. After the contest you may combine the renamed wsjtx_log.adi and the one used during the contest using any text editor and save it as wsjtx_log.adi. During combination you need to left out from the contest adi file the header information. The combination is needed, if you wish to see in your everyday history also contacts you made during the contest. 73, Reino OH3mA
|
|
|