|
locked
Re: Trying to install WSJT-X ver 2.3.1
#WSJTX_config
On 09/05/2021 18:54, KB3TC wrote:
Trying to install WSJT-X ver 2.3.1 on Ubuntu I am not very good with linux but trying. When I tried to install using sudo dpkg -i wsjtx_2.3.1_amd64.deb it comes back with an errors.Hi OM, what version of Ubuntu are you using? 73 Bill G4WJS.
|
|
|
|
locked
Re: #WSJTX_config
#WSJTX_config
On 09/05/2021 17:55, Wes Elton wrote:
Hi All,Hi Wes, only CQ or QRZ messages are scanned for highlighting. 73 Bill G4WJS.
|
|
|
|
Komkit Listisard
Check the width setting. FT891 have a very bad habit of not remembering the width setting. Verify if it is set to 3KHz, 891 like to go back to 500Hz setting.
73, Kit W3KIT
|
|
|
|
william.sussman@...
Hello,
I am a college student and new to ham radio. For my senior project I decided to attempt EME/Moonbounce. I have an IC-9700 and a PC running Ubuntu 18.04 with WSJT-X v2.2.2. I am having trouble setting up CAT. I think the problem is the Serial Port. None of {/dev/ttyUSB0, /dev/ttyUSB1, USB} works. Any advice would be appreciated. Thanks, Will (KD2TGH)
|
|
|
|
locked
#CQ Mode
JoAnn Donaldson <joannplano2005@...>
I can set TX6 to say CQ MO-KS-LA AB8YZ EM12 but when it transmits is says <....> AB8YZ. JoAnn AB8YZ
|
|
|
|
locked
Trying to install WSJT-X ver 2.3.1
#WSJTX_config
KB3TC
Trying to install WSJT-X ver 2.3.1 on Ubuntu I am not very good with linux but trying. When I tried to install using sudo dpkg -i wsjtx_2.3.1_amd64.deb it comes back with an errors.
Any help is appreciated. I wanted to try out the new FST4 but I am on an older version. Here is the output from the install : (Reading database ... 212417 files and directories currently installed.) Preparing to unpack wsjtx_2.3.1_amd64.deb ... Unpacking wsjtx (2.3.1) over (2.3.1) ... dpkg: dependency problems prevent configuration of wsjtx: wsjtx depends on libboost-log1.62.0 (>= 1.62.0) | libboost-log1.65.1 (>= 1.65.1) | libboost-log1.67.0 (>= 1.67.0) | libboost-log1.71.0 (>= 1.71.0) | libboost-log1.74.0 (>= 1.74.0); however: Package libboost-log1.62.0 is not installed. Package libboost-log1.65.1 is not installed. Package libboost-log1.67.0 is not installed. Package libboost-log1.71.0 is not installed. Package libboost-log1.74.0 is not installed. wsjtx depends on libboost-log1.71.0; however: Package libboost-log1.71.0 is not installed. dpkg: error processing package wsjtx (--install): dependency problems - leaving unconfigured Processing triggers for gnome-menus (3.36.0-1ubuntu1) ... Processing triggers for desktop-file-utils (0.24-1ubuntu3) ... Processing triggers for mime-support (3.64ubuntu1) ... Processing triggers for man-db (2.9.1-1) ... Errors were encountered while processing: wsjtx
|
|
|
|
locked
#WSJTX_config
#WSJTX_config
Wes Elton
Hi All,
"Highlighting a new country". Under General/Display I've checked the Show DXCC box and under Colours/Decode Highlighting I've checked the New DXCC on band box. With these settings, I expected the Band Activity window to show me any new DXCC entity highlighted in the selected colour. What actually happens is that a country already worked is sometimes highlighted! Can someone please advise what settings I need to change achieve the required new country highlight? Also, consider the band activity window shows a station working a country new to me, e.g P5ABC GW3DEF -5 is displayed. I (we) need P5. Given WSJT-X creates a logbook of all past contacts, is there a setting that would check in the log and then highlight that P5ABC as a wanted country? If not currently available, could this be a feature included in a future update? I'd appreciate any/all advice. 73 es stay safe Wes. GW3RIH.
|
|
|
|
locked
Off Topic but relevant - RE: [WSJTX] Loss of QSO data when logging previous QSO.
#logging
#IssueReport
Bob Turner
toggle quoted messageShow quoted text
From: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io]
On Behalf Of Philip Rose via groups.io
Sent: Saturday, May 8, 2021 2:17 PM To: main@WSJTX.groups.io Subject: Re: [WSJTX] Loss of QSO data when logging previous QSO. #logging #BugReport
Thanks Bill, I doubled clicked the partner’s report and that doesn’t populate the DX Grid. I have a personal problem that I can’t always double-click fast enough.
73 Phil GM3ZZA
Sent from Mail for Windows 10
From: Bill Somerville
On 07/05/2021 15:31, Philip Rose via groups.io wrote: > I have had the following scenario a couple of times. When I am completing a QSO, I send RR73 and wait for the QSO partner to either repeat his report, send 73 or send nothing before logging the QSO. If I am called by another station, I double click on that to start the QSO. I then log the first QSO. When I log it the DX Call and DX Grid of the second station are removed and the auto-sequencing stops. > > Is there a way to stop the act of logging from removing the details OF A NEW QSO. > -- 73 Phil GM3ZZA
Hi Phil,
"Settings->Reporting->Clead DX call and grid after logging" controls that behaviour. OTOH you can always double-click the message from the second caller again to restart the sequencing with correct details.
73 Bill G4WJS.
|
|
|
|
Reino Talarmo
Hi David, You explained that behaviour completely, thanks! 73, Reino OH3mA
Lähettäjä: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] Puolesta David - AK2L
Hi Reino,
|
|
|
|
locked
Re: Detected dropped audio source samples and Syslog
#AudioIssues
#logging
Richard Waterman
That's great, many thanks Bill.
73, Richard, G4KRW
|
|
|
|
Hello Bill,
Saturday, May 8, 2021, 6:10:10 AM, you wrote: ---------------------------------------------------- Hi Bob, where different parameters are used for different bands and/or---------------------------------------------------- Thanks Bill, and others, especially Gary too(blushing_shy), I am setting up the configurations now. And Like Roger, I will have at least 12, hi hi ...three rigs plus the SDR-for-RX variations again, thanks for the reply(s) -- Best regards, Bob KD7YZ -- -- Bob KD7YZ in NE Kentucky
|
|
|
|
DF3ED
Hello Bob,
I see the same effect when I push the tune button before. In the windows sound window I see that sound output switches to the time when wsjt is in receive state and sound output stops when wsjt switches to transmit state. It is an inversion ..... Restart of wsjt without using tune button normaly helps me. I think it is a bug ..... -- 73 de DF3ED Peter
|
|
|
|
N3JF
The following is all about FT8 on the FT-891:
When I run the Windows latest version of WSJT-X and configure it to talk directly to my FT-891 through a Signalink USB, it works great when the communication mode is set to USB. If I change the mode to Data/Pkt in WSJT-X, the audio coming from the radio's speaker becomes very quiet. If I turn it up, the audio sounds like a broken speaker... popping and crackling. The received audio tone out of the speaker is very low. Transmit audio sounds fine. When WSJT-X transmits, it'll adjust the TX frequency according to the TX frequency set in the Waterfall, but it doesn't always properly RESET it to 7.040MHz. When this happens, the transmitter "walks down the band". If I configure WSJT-X to use FLRig and Data/Pkt mode, and set FLRig to use DATA-U, I hear more normal FT8 tone, but they're considerably more "muffled". In fact, I don't think I've made a single contact using DATA mode! If I configure both FLRig and WSJT-X to use USB, I make contacts all day long.... However... when the radio first keys up, the microphone is live for about 1/4 - 1/2 a second and I can hear room noise/feedback while listening to my transmitted audio on another radio. If I configure WSJT-X to talk directly to the FT-891 (no FLRig involved), the same thing happens... unless I configure WSJT-X to use RTS for PTT (RTS is disabled in the radio menu). I cannot do the same thing when using FLRig as all the available ports give me an error message. Why doesn't WSJT-X work when it's connected directly to the FT-891 in DATA mode (deep popping/crackling audio from the speaker, WSJT-X doesn't hear ANY signals)? Why does WSJT-X keep the mic live for a short period in USB mode before it starts transmitting FT8 tones? Why does WSJT-X (intermittently, but very frequently) not correctly restore the radio to the correct receive frequency after transmitting? I appreciate any help! 73
|
|
|
|
Hi Reino,
Thanks for responding. To answer your question... Yes, I can paste into Notepad just fine. I think I see the problem. Perhaps you can test this to see if you get the same behavior. If I select a call sign with an extra space such as "3D2ZK ", copy it to the clipboard, and then try to paste it into WSJT-X, it fails to paste. If instead I select a call sign with no extra spaces such as "3D2ZK", it seems to work. Perhaps the clipboard handler in WSJT-X could be more forgiving by trimming whitespace off of the text rather than rejecting it completely. AK2L, David
|
|
|
|
locked
Re: Loss of QSO data when logging previous QSO.
#logging
#IssueReport
Thanks Bill, I doubled clicked the partner’s report and that doesn’t populate the DX Grid. I have a personal problem that I can’t always double-click fast enough.
73 Phil GM3ZZA
Sent from Mail for Windows 10
From: Bill Somerville
Sent: 08 May 2021 18:20 To: main@WSJTX.groups.io Subject: Re: [WSJTX] Loss of QSO data when logging previous QSO. #logging #BugReport
On 07/05/2021 15:31, Philip Rose via groups.io wrote: > I have had the following scenario a couple of times. When I am completing a QSO, I send RR73 and wait for the QSO partner to either repeat his report, send 73 or send nothing before logging the QSO. If I am called by another station, I double click on that to start the QSO. I then log the first QSO. When I log it the DX Call and DX Grid of the second station are removed and the auto-sequencing stops. > > Is there a way to stop the act of logging from removing the details OF A NEW QSO. > -- 73 Phil GM3ZZA
Hi Phil,
"Settings->Reporting->Clead DX call and grid after logging" controls that behaviour. OTOH you can always double-click the message from the second caller again to restart the sequencing with correct details.
73 Bill G4WJS.
-- 73 Phil GM3ZZA
|
|
|
|
locked
Re: Detected dropped audio source samples and Syslog
#AudioIssues
#logging
On 08/05/2021 17:42, Richard Waterman wrote:
Hello,Hi Richard, small numbers like that can be ignored, we had to set the cut off somewhere. Negative numbers indicate more samples than expected. The counts are for each period of the current mode, there is never an exact expected count due to latencies between soundcard and software. In summary, you have nothing to worry about, if the discrepancies are of the order of 0.5 seconds and happen often then you would have a problem with your audio streaming throughput or system timekeeping. Log files are rotated monthly or if they exceed a certain size, old rotated logs are deleted. IIRC 12 old logs are kept, the total amount of log data will be small. There are options to increase the logging verbosity using a configuration file, but for most users the default with no logging configuration file will be fine. 73 Bill G4WJS.
|
|
|
|
Gary - AG0N
On May 7, 2021, at 04:35, KD7YZ Bob <kd7yz@...> wrote:Thirty seconds is the normal time for MSK144. Gary - AG0N
|
|
|
|
JoAnn Donaldson <joannplano2005@...>
Have you selected the audio from your radio in the app. Also have you selected the TX audio to your radio? Have you setup PTT? These are the three items that you have to have setup for the App to work and for your radio to work. Some radios have built in interfaces like the Flex Radio does. Other radios require an Sound Card Interface box that goes between your Radio and your computer. To fully help you, we need to know what kind of radio you have, do you have a Sound Card Interface and etc. JoAnn AB8YZ
On Saturday, May 8, 2021, 4:50:12 PM CDT, Bill Somerville <g4wjs@...> wrote:
On 08/05/2021 12:34, Robert Necci KD2NFS wrote: > All my FT8 settings appear to be correct, but no pwr out on the radio. > Suggestions appreciated. > > TU es 73 de Bob KD2NFS Bob, more contextual information appreciated please? 73 Bill G4WJS.
|
|
|
|
On 08/05/2021 12:34, Robert Necci KD2NFS wrote:
All my FT8 settings appear to be correct, but no pwr out on the radio. Suggestions appreciated.Bob, more contextual information appreciated please? 73 Bill G4WJS.
|
|
|
|
Arnold Lausevich <nk9o@...>
Speaker set to Codex? Sent from my Samsung Galaxy , an AT&T LTE smartphone
-------- Original message -------- From: Robert Necci KD2NFS <Kd2nfs@...> Date: 5/8/21 12:20 PM (GMT-06:00) To: main@WSJTX.groups.io Subject: [WSJTX] No PWR out on Tx #FT8 TU es 73 de Bob KD2NFS
|
|
|