|
locked
Re: #FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
I also have my B4's as white on a black background. I set those colors in JTAlert and sent over to WSJTX. 73, Herb WB8ASI
|
|
|
|
locked
Re: Tx Rx frequency changes
#FT8
#transmit
#Cat_RigControl
Thank you Willie!!!! Ron
On Wed, Apr 7, 2021 at 3:51 PM William Smith <w_smith@...> wrote: There’s a checkbox to hold your Tx frequency.
|
|
|
|
locked
Re: #FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
On 08/04/2021 00:25, Phil Hazelton via groups.io wrote:
Hi Bill, before the crash, I had worked before QSOs come up as white on a black background when they called CQ again, I can’t seem to set this up anymore?Hi Phil, have you set the foreground and background colours for "CQ Message" highlighting to those colours? 73 Bill G4WJS.
|
|
|
|
locked
Re: #FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
Phil Hazelton
Hi Bill, before the crash, I had worked before QSOs come up as white on a black background when they called CQ again, I can’t seem to set this up anymore?
|
|
|
|
locked
Re: #FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
On 07/04/2021 23:22, Phil Hazelton via groups.io wrote:
Hi, no, the wsjtx log.adi file is still intact, I didn’t have to wipe and reload the drive. How do I set up the B4 colour?Phil, there is no before colour. The WSJT-X decode highlighting includes colours for new calls and new calls on band. If a call is worked before then the default CQ colour will be shown. 73 Bill G4WJS.
|
|
|
|
locked
Re: #FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
Phil Hazelton
Hi, no, the wsjtx log.adi file is still intact, I didn’t have to wipe and reload the drive. How do I set up the B4 colour?
|
|
|
|
locked
Re: #FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
neil_zampella
Did you have to wipe the drive and reload everything, or did you
have a backup to restore?
On 4/7/2021 3:34 PM, Phil Hazelton via
groups.io wrote:
Hi All,
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
Jim Brown
Yes. DXKeeper is a wonderful logger, and I've used it as my general logger since getting back on the air in 2003. I do exactly as Dave suggests, exporting my contest logs to DXKeeper after each contest, using DXKeeper to interact with LOTW, eQSL, and ClubLog, which it does almost automagically. I also find several of the other apps in Dave's DXLab integrated suite of programs useful. And they are all bug-free, well supported, and FREE! Thanks very much, Dave!
toggle quoted messageShow quoted text
73, Jim K9YC
On 4/7/2021 1:41 PM, Dave AA6YQ wrote:
+ If you are a serious contester, I agree with Jim K9YC's recommendation above to log QSOs using N1MM, as it tracks your rate and score in real time. At the end of the contest, export your contest QSOs from N1MM to an ADIF file, and import that file into DXKeeper. Alternatively, use the N1MM-to-DXKeeper gateway, which automatically conveys QSOs from N1MM to DXKeeper in real time.:
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
Dave AA6YQ
+ AA6YQ comments below
On 4/7/2021 9:27 AM, Pete Ritter via groups.io wrote: Contesting with WSJT-X, JTAlert, DXKeeper What is the best way to workNone of these are contesting applications. N1MM Plus Logger is contesting software, and integrates with WSJT-X. WriteLog is also contesting software, and it MAY integrate with WSJT-X. N1MM Logger Plus is Freeware. WriteLog is not. You will need one of these to get the Worked B4 function relative to the contest and it's rules (for example, some are Worked B4 per band and or mode, some are Worked B4 on any band and/or mode. + If you are a serious contester, I agree with Jim K9YC's recommendation above to log QSOs using N1MM, as it tracks your rate and score in real time. At the end of the contest, export your contest QSOs from N1MM to an ADIF file, and import that file into DXKeeper. Alternatively, use the N1MM-to-DXKeeper gateway, which automatically conveys QSOs from N1MM to DXKeeper in real time.: https://www.dxlabsuite.com/N1MM-DXKeeper/index.htm Note that DXLab's DXKeeper provides realtime award tracking for DXCC, IOTA, Marathon, VUCC, WAS, WAZ, and WPX awards - considering QSOs made in all modes, not just QSOs made in K1JT modes like FT8. This enables other components of the DXLab Suite like SpotCollector and Commander to highlight the callsigns of currently-active stations with whom a confirmed QSO would advance your award progress. de AA6YQ (developer, DXLab) 73, Dave, AA6YQ
|
|
|
|
locked
#FT8 #GeneralGroupInfo #GeneralGroupInfo #FT8
#FT8
#GeneralGroupInfo
Phil Hazelton
Hi All,
Running v2 3 1 on Win 10 with a IC 7300. Had a major crash after running flawlessly for months, but managed to get things back, BUT, all the colours in the panes have reset, I can’t seem to get the worked before stations to show up. I have the “show DXCC, grid, and worked before status” All my worked stations are still showing in the log adi file. Any ideas appreciated Phil G8PJH
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
I use it exclusively with WSJT-X via JTAlert for both DX and contesting.
toggle quoted messageShow quoted text
73 -- Larry -- W1DYJ
-----Original Message-----
From: Jim Brown Sent: Wednesday, April 07, 2021 16:08 To: main@WSJTX.groups.io Subject: Re: [WSJTX] Contesting with WSJT-X, JTAlert, and DXKeeper #ContestMode #FT8 #logging #udp On 4/7/2021 12:41 PM, Larry Banks via groups.io wrote: And don't forget to look at the N3FJP suite of contest loggers.Do you know that it supports WSJT-X? 73, Jim K9YC
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
Jim Brown
On 4/7/2021 12:41 PM, Larry Banks via groups.io wrote:
And don't forget to look at the N3FJP suite of contest loggers.Do you know that it supports WSJT-X? 73, Jim K9YC
|
|
|
|
locked
Re: Tx Rx frequency changes
#FT8
#transmit
#Cat_RigControl
William Smith
There’s a checkbox to hold your Tx frequency.
toggle quoted messageShow quoted text
73, Willie N1JBJ
On Apr 7, 2021, at 3:33 PM, Ron Schunk <ron051798@...> wrote:
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
And don't forget to look at the N3FJP suite of contest loggers.
toggle quoted messageShow quoted text
73 -- Larry -- W1DYJ
-----Original Message-----
From: Jim Brown Sent: Wednesday, April 07, 2021 15:05 To: main@WSJTX.groups.io Subject: Re: [WSJTX] Contesting with WSJT-X, JTAlert, and DXKeeper #ContestMode #FT8 #logging #udp On 4/7/2021 9:27 AM, Pete Ritter via groups.io wrote: Contesting with WSJT-X, JTAlert, DXKeeperNone of these are contesting applications. N1MM Plus Logger is contesting software, and integrates with WSJT-X. WriteLog is also contesting software, and it MAY integrate with WSJT-X. N1MM Logger Plus is Freeware. WriteLog is not. You will need one of these to get the Worked B4 function relative to the contest and it's rules (for example, some are Worked B4 per band and or mode, some are Worked B4 on any band and/or mode. 73, Jim K9YC
|
|
|
|
locked
Re: VS: [WSJTX] ADIF Master and wsjt_log.adi compatibility
#WSJTX_config
You can merge ADIF files using any text editor as long as you keep the lines between each <EOR> together.
73 Phil GM3ZZA
Sent from Mail for Windows 10
From: Sam Birnbaum via groups.io
Sent: 07 April 2021 19:23 To: reino.talarmo@...; main@WSJTX.groups.io Subject: Re: VS: [WSJTX] ADIF Master and wsjt_log.adi compatibility #WSJTX_config
Hi All,
As I have seen a few threads regarding adi files merge questions. I am just finishing an enhancement to my Alltext.exe program to facilitate appending ADIF records from one adi file to another. The program will take care so that no duplicates will exists in the destination file no matter how many times the same files are used. Should be ready before the weekend.
73,
Sam W2JDB
-----Original Message----- Hi Radi, Just use any text editor such as Notepad. You need to open using that text editor program as you got Adifmaster installed. Cut and paste or copy and paste as appropriate from one log file to another one. Save the result so that Windows don’t add .txt to the filename or remove .txt by renaming the combined file. Remember to check that you have only a single header (or none) at the beginning of the file. Of course that method may be more complicated, if the QSOs you want amend are distributed all over the source file. I think that also adif generate by the Adifmaster will be ok. You may take copies of the adif files and experiment by those. 73, Reino OH3mA
Lähettäjä: main@WSJTX.groups.io [mailto:main@WSJTX.groups.io] Puolesta Radivoj Kar, f6gnz via groups.io
Hi Carl,
-- 73 Phil GM3ZZA
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
Joe Subich, W4TV
On 2021-04-07 2:41 PM, neil_zampella wrote:
Another way of doing it is that since you using JTAlert, you can setIf you are using WSJTX, JTAlert *and* DXKeeper, you will need to do it this way as JTAlert will use your DXKeeper log for "B4" and not the WSJTX file. The adif file is only used when JTAlert is not logging to a third party logger. 73, ... Joe, W4TV On 2021-04-07 2:41 PM, neil_zampella wrote: Another way of doing it is that since you using JTAlert, you can set the
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
Jim Brown
On 4/7/2021 9:27 AM, Pete Ritter via groups.io wrote:
Contesting with WSJT-X, JTAlert, DXKeeperNone of these are contesting applications. N1MM Plus Logger is contesting software, and integrates with WSJT-X. WriteLog is also contesting software, and it MAY integrate with WSJT-X. N1MM Logger Plus is Freeware. WriteLog is not. You will need one of these to get the Worked B4 function relative to the contest and it's rules (for example, some are Worked B4 per band and or mode, some are Worked B4 on any band and/or mode. 73, Jim K9YC
|
|
|
|
locked
Tx Rx frequency changes
#FT8
#transmit
#Cat_RigControl
Looking for input....when I'm trying to run a CQ my Tx/Rx frequency changes to the frequency of the last contact that I made. I pick a spot in the waterfall and double click ctrl, the red/green brackets move, the frequency shows in the appropriate boxes, I put out a CQ and the frequencies shift back to the one from the last contact showing in the right hand window...Have I forgotten to check something somewhere? Or is this a program bug?
I go back and change the frequency to another clear spot and it shifts back to the previous freq again? Input please Ron WA8KQF
|
|
|
|
Hi Andy,
Yes, the mp_* routines are there to do slow-but sure multiple-precision arithmetic. This is necessary because we need to save a 71-bit result of the packing operation. I just wrote a simple Fortran test program that you can use to help yourself figure out what is going on. You can download it here, compile it for yourself, and then work out how to re-write it in C (or whatever). https://physics.princeton.edu/pulsar/k1jt/t1.f90 -- 73, Joe, K1JT
|
|
|
|
locked
Re: Contesting with WSJT-X, JTAlert, and DXKeeper
#networking
#ContestMode
#FT8
#logging
neil_zampella
Another way of doing it is that since you using JTAlert, you can
set the B4 date to disregard any QSOs prior to the date of the
start of the contest. You would then also adjust the checkboxes
on the B4 settings to ignore band or mode, etc.
On 4/7/2021 11:52 AM, Bill Somerville
wrote:
On 07/04/2021 17:27, Pete Ritter via groups.io wrote:
|
|
|
