Date   

locked Re: LinHPSDR/WSJTX no network option for OpenHPSDR/PiHPSR

Morris Ford <morrishford@...>
 

Actually I thing the rig choice was something like openhpsdr.

Morris
K7LSV


On Wed, Sep 2, 2020 at 12:45 PM Morris Ford <morrishford@...> wrote:
Well,
I used wsjt-x 2.1.2 for quite a while ( at least a year) with the connection to the radio via a network connection that was available in wsjt-x by choosing the pihpsdr rig option. The same thing does not work in 2.2.2. Whatever nomenclature is used to talk about it, that connection existed and worked quite well.

Morris
K7LSV


On Wed, Sep 2, 2020 at 12:29 PM m_scot_alex <amsctalx@...> wrote:
There is, to the best of my knowledge, no FRS SSR-style 'network' rig-control and communication ability in any OpenHPSDR PowerSDR-based client software, so you'll have to use serial port emulation for the foreseeable future.

73,

Mike - N8MSA


locked Re: LinHPSDR/WSJTX no network option for OpenHPSDR/PiHPSR

Morris Ford <morrishford@...>
 

Well,
I used wsjt-x 2.1.2 for quite a while ( at least a year) with the connection to the radio via a network connection that was available in wsjt-x by choosing the pihpsdr rig option. The same thing does not work in 2.2.2. Whatever nomenclature is used to talk about it, that connection existed and worked quite well.

Morris
K7LSV


On Wed, Sep 2, 2020 at 12:29 PM m_scot_alex <amsctalx@...> wrote:
There is, to the best of my knowledge, no FRS SSR-style 'network' rig-control and communication ability in any OpenHPSDR PowerSDR-based client software, so you'll have to use serial port emulation for the foreseeable future.

73,

Mike - N8MSA


locked Re: Vertical lines in WSJT-X waterfall

Russell Ferguson
 

John,

I followed your link to #15963 in groups.io and there were 20 posts in the topic.

Russell,
WB5DXG

------
Russell Ferguson
2003 Cross Point Cove
Brandon, MS 39042
(601)932-7736
r.w.ferguson@...


On Tuesday, September 1, 2020, 10:13:11 PM CDT, JP Tucson, AZ <samcat88az@...> wrote:


Hello Andy, 

Here's a recent example below discussing an rfi issue. Several good posts from several hams on IDing  the issue & help to find the cause... now mostly (12 posts) deleted!



How can this be used as a knowledge base, when stuff does keep getting deleted?




73 - John - N7GHZ




On Tue, Sep 1, 2020, 9:14 AM JP Tucson, AZ via groups.io <samcat88az=gmail.com@groups.io> wrote:
You are welcome Tyler, glad you were able to find & solve the issue.


73 - John - N7GHZ

On Tue, Sep 1, 2020, 8:43 AM Tyler Parsons <tparsons@...> wrote:

I went noise hunting around the shack with a portable receiver on 14.074Mhz and found loud noise around one of two monitors, nowhere else. I switched out the monitor for a different somewhat newer one, and the noise has disappeared from both the portable receiver and the waterfall. Everything else is pretty quiet.

It's old, but I'll keep the Grundig Yachtboy my wife gave me for Christmas many years ago around for a while

Thanks for all the suggestions, particularly John N7GHZ!
--
Tyler WB7DD



Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#16083): https://WSJTX.groups.io/g/main/message/16083


locked Need help finishing setup

dhopkins04573@...
 

Good morning all, thanks for having me.  I am attempting to setup ft891, lcd auto tuner, shortened dipole mounted vertically with a Raspberry Pi 4, 8 gbyte currently running WSJT-X 2.2.2. Audio interface is a Sabrent USB external adapter. Optionally rig control can be by flrig but there is no difference in the way the system operates. Both WSJT-X and the Raspberry Pi operating system were installed with no errors, and start as expected.

Receive sound level is set as suggested.  The waterfall and decodes operate as you expect, in fact, I am a little surprised at how many signals are decoded.  The system will run in receive for extended periods of time in receive/decode and properly uploads to PSKReporter.

The problem occurs on transmit, either ‘tune’ or normal transmit.  The system appears to properly enter transmit mode, although no tone(s) seem to be generated.  This may be a problem with the audio setup, I don’t know at this stage.  After the transmit, the system appears to return to receive mode however the green audio in level remains at zero and no decodes happen.  The waterfall does operate normally, showing about the same number of signals as it did previously.

Closing the WSJT-X window does not shut down the system properly.  Reopening WSJT-X results in an error message to the effect ‘another instance is running.’  None of the options in the dialog box operate correctly.  Recovery from this state requires a ‘kill’ from the task manager or a system reboot.

An unrelated symptom, which I assume is different is that neither the time bar at the bottom right of the main page, nor the ‘test CAT’ button on the settings audio page are or ever turn green.  The test CAT button does seem to do what it should.  A short time after it is pressed, the ‘Test PTT’ button is enabled, and does turn red when enabled.  Enabling it and then disabling it does not interfere with the operation of the receiver nor decodes.

All cabling in the system is protected with ferrite beads, and the components are bonded.

thanks for your help.

Dennis
AC4DH

 


locked Re: LinHPSDR/WSJTX no network option for OpenHPSDR/PiHPSR

m_scot_alex
 

There is, to the best of my knowledge, no FRS SSR-style 'network' rig-control and communication ability in any OpenHPSDR PowerSDR-based client software, so you'll have to use serial port emulation for the foreseeable future.

73,

Mike - N8MSA


locked Re: Waterfall active, no decodes

lmeeny
 

As post earlier I can consistently force the “no decode” failure, decodes stopping after several minutes of operation in spite of good signals on the waterfall. Bill posted if FILE ---> SETTINGS---> GENERAL --> START NEW PERIOD DECODES AT TOP was enabled this triggers a know fault. Deselecting it and saving didn’t resolve the problem. Was the setting “stuck” in a configuration file somewhere?  I uninstalled WSJT-X and deleted all other files relating to it. Reinstalling … the fault cleared.

Ed W2GHD


locked Re: Vertical lines in WSJT-X waterfall

Tyler Parsons
 
Edited

There's some 2884 messages archived in the https://wsjtx.groups.io/g/main/topics page. You should be able to do a search for a particular topic, such as "waterfall" and bring up all messages with that. I don't know whether it will also search multiple keywords as "and" or "or".  At the bottom of the message, there's a selection  for all messages in the topic.I just picked "Re: Vertical lines in WSJT-X waterfall" and all 19 (now 20?) came up.
--
Tyler WB7DD


locked Re: Blind ham in need of help to get started

Gary - AG0N
 

On Sep 2, 2020, at 04:26, Bill Somerville <g4wjs@...> wrote:

I am happy to try and help, I am a former TS-200u user. The TS-2000 will also require some sort of interface that handles sound since it has no built-in sound card. Do you have an interface ?
As Bill stated, that’s already taken care of - which brings up a point that needs to be made. As a person who has helped more than one blind ham a great deal over the years, one in particular for the last 40 years, I would request that you pay vey close attention to what is stated and what is not. It wastes a lot of time going over things that have already been covered. Blind hams are not stupid. They are handicapped and need a specific type of help and someone who understands enough of the problem to be able to spell it out in ways that they can understand and deal with. In some cases, it also helps or speeds things up if you know specifically how to respond to a question (how to write/type the answer).

Please check the facts before jumping in to the rescue.

Thank you.

73, Gary - AG0N


locked Re: Not working well #WSJTX_config

Bill Somerville
 

On 01/09/2020 20:24, chrisdg4kvi@... wrote:
Can someone tell me why I've got these lines on the waterfall?

 

Hi OM,

the green lines indicate the start/end of T/R periods. The signals look like FT8, yo probably want to reduce the "N Avg" spin box control to 1 or 2 to slow down the waterfall. You are working with a quite narrow bandwidth, I expect your rig bandwidth is more than the 1200 Hz width of the waterfall. Either expand the Wide Graph window, or increase the "Bins/Pixel" spin box to increase the decoder analysis window. I will assume the uneven spacings of the T/R periods is due to your transmissions, if that is not the case then there may be issues with system performance causing audio data to be lost.

You may find reviewing the operating tutorials in the WSJT-X User Guide useful:

https://physics.princeton.edu/pulsar/K1JT/wsjtx-doc/wsjtx-main-2.2.2.html#TUTORIAL

73
Bill
G4WJS.


locked Re: Not working well #WSJTX_config

Williams, G (af8c) <af8c@...>
 

I am going to take a wild guess that your CPU is too slow or to busy to keep up with WSJTX for some reason. It appears there is not enough CPU power to keep up with the timing.  That's because the horizonal lines that are supposed to be 15 seconds apart, are not scrolling often enough.  My guesses come from last night's problems with my slow Windows 7 netbook as described below.

In my opinion, if not in fact, the WSJTX User Manual does not suggest that you need dedicate (buy?) a quite fast machine, perhaps with Solid State Drive, with no other unnecessary processes running on the side. And there might be other requirements for the PC also. 

My slow Netbook's audio going to the SL to a TS2000:  I monitored the audio being transmitted with the PWR/TX MONI function on the front panel of the TS2000.  There were obvious "burbles" in the audio going out and I was not getting many QSOs. Upon investigation in the PC with Task Manager I found unwanted processes running in the background, such as several instantiations of the browser. ( I don' know why they were "stuck" in the list when I didn't have a browser open)  I was not able to stop enough unwanted processes in Task Manager to affect (remove) the burbles in the audio. Well, this netbook had been pinched into service due to problems with other computers at the time.

Moral to that story:  listen to/monitor the audio being transmitted.  Yes, I suppose not all radios have that ability.

Ways to find out more about your PC's workload follow.

Are you running a slow old PC?  Replace it with something newer.

Learn how to use Task Manager  (found by right clicking in the Taskbar) .

Looking at the Desktop, or in the Applications Tab in Task Manager,  close all other unnecessary applications that might be running, but NOT WSJTX,  When Task Manager is running, click on the Performance tab to see how busy the CPU is, and click on the Application Tab to see if anything is running that is not WSJTX related. All other applications need to be stopped.

Next, is your hard drive light illuminated/ flickering a lot, a majority of the time?  Perhaps your hard drive is too busy doing something that is not obvious in the Task Manager.  Perhaps you have an antivirus/antimalware application running? Some anitmalware software can tie up your PC something fierce.

Unfortunately, a deeper dive into Task Manager control would take up too much space here.

Yep, I can get wordy.

--73, Glenn, AF8C

On 9/1/2020 3:24 PM, chrisdg4kvi via groups.io wrote:
Can someone tell me why I've got these lines on the waterfall?

 

    



Avast logo

This email has been checked for viruses by Avast antivirus software.
www.avast.com



locked Success!

lmeeny
 

As post earlier I can consistently force the “no decode” failure, decodes stopping after several minutes of operation in spite of good signals on the waterfall. Bill posted if FILE ---> SETTINGS---> GENERAL --> START NEW PERIOD DECODES AT TOP was enabled this triggers a know fault. Deselecting it and saving didn’t resolve the problem. Was the setting “stuck” in a configuration file somewhere?  I uninstalled WSJT-X and deleted all other files relating to it. Reinstalling … the fault cleared.

Ed W2GHD


locked Re: World-wide Digi DX Contest Problem

Bill Somerville
 

On 02/09/2020 12:38, Bill N4iQ wrote:

[Edited Message Follows]

Hello Frode

I appreciate your comments.  The problem I was having was - while split and fake it operated just as you described, the actual desired audio frequency was not correct.  I verified this by monitoring my actual transmitted signal on a second radio running WSJT-X.   The ACTUAL transmitted audio had a constant offset from the desired and expected frequency.  NU4E also experienced this problem at his station.  The offset caused severe problems when operating because the frequency (say 1000 hz) I thought was being sent was not sent.  Instead 1500 Hz was actually being sent.  (I don't remember the actual offset - sorry).  I verified this on the second independent radio and WSJT-X setup.  I was making very few QSOs when this happened, even with 1 KW output.  Once I stopped using split or fake it, I verified the ACTUAL transmitted signal on the independent WSJT-X and the problem was gone.  I started making QSOs at good rates.  I run SO2R FT8 & FT4 so verifying this problem was easy.  My second SO2R radio setup never experienced this problem.

Bill N4iQ
Hi Bill,

your comments do not clarify the issue you are reporting. Audio offsets are irrelevant when checking the behaviour, what matters is the RF frequency the signal is sent on. If I understand correctly, you are saying that while using one of the WSJT-X "Settings->Radio->Split Operating" options you selected a Tx audio offset, say 1000 Hz, on a VFO dial frequency, say 14,074 kHz, and observed the transmitted signal was *not* at 14,075 kHz (lowest tone frequency). If that is what you are observing then please tell us what VFO dial frequency is being selected for your Tx VFO when this happens?

As an aside, why do you need to use anything other than "Settings->Radio->Split Operating->None" when you are using an all digital audio chain, and a rig with variable Tx and Rx bandwidth?

73
Bill
G4WJS.


locked Re: Blind ham in need of help to get started

Andrew OBrien
 

OK , I missed that . Georgina , I can help via Teamviewer if needed .

Andy

On Sep 2, 2020, at 6:27 AM, Bill Somerville <g4wjs@...> wrote:

On 02/09/2020 03:51, Andrew OBrien wrote:
I am happy to try and help, I am a former TS-200u user. The TS-2000 will also require some sort of interface that handles sound since it has no built-in sound card. Do you have an interface ?

Andy K3UK
Andy,

Georgina stated that she has a SignaLink USB interface, and it is already configured for use with a TS-2000.

73
Bill
G4WJS.


locked Re: LinHPSDR/WSJTX no network option for OpenHPSDR/PiHPSR

Jack D. Generaux
 

Thanks for reply -- I am giving up on the network approach and will try pseudo serial cables created with socat.  Hopefully that will do.

73,
Jack (W0FNQ)


locked Re: World-wide Digi DX Contest Problem

Bill N4iQ
 
Edited

Hello Frode

I appreciate your comments.  The problem I was having was - while split and fake it operated just as you described, the actual desired audio frequency was not correct.  I verified this by monitoring my actual transmitted signal on a second radio running WSJT-X.   The ACTUAL transmitted audio had a constant offset.  NU4E also experienced this problem at his station.  The offset caused severe problems when operating because the frequency (say 1000 hz) I thought was being sent was not sent.  Instead 1500 Hz was actually being sent.  (I don't remember the actual offset - sorry).  I verified this on the second independent radio and WSJT-X setup.  I was making very few QSOs when this happened, even with 1 KW output.  Once I stopped using split or fake it, I verified the ACTUAL transmitted signal on the independent WSJT-X and the problem was gone.  I started making QSOs at good rates.  I run SO2R FT8 & FT4 so verifying this problem was easy.  My second SO2R radio setup never experienced this problem.

Bill N4iQ


locked Re: Vertical lines in WSJT-X waterfall

Alan G4ZFQ
 

please provide a link to a thread that you think is no longer visible?
Searching the group for "adi header" shows 13 posts giving the answer even without opening one.

73 Alan G4ZFQ


locked Re: Vertical lines in WSJT-X waterfall

Bill Somerville
 

John,

please provide a link to a thread that you think is no longer visible?

73
Bill
G4WJS.

On 02/09/2020 11:57, JP Tucson, AZ wrote:

Uh, it's there... and then it is not!

Good bye, adios, sayonara, dasvidaniya...

Later when you you go back & click on the linked thread, it is gone!!!

That's why on some of threads that I really want to save; I'll actually copy & paste the info into an email & send it back to myself &/or save it as a word doc.

There is a reason people keep asking you the same thing, over & over again, Bill.  Like the .adi header problem, etc.. Again, that is why I suggested the new - "known issues" page on the original wsjt-x home page.



73 - John - N7GHZ

On Wed, Sep 2, 2020, 3:31 AM Bill Somerville <g4wjs@...> wrote:
John,

please explain?

73
Bill
G4WJS.

On 02/09/2020 11:18, JP Tucson, AZ wrote:
Well, in a few days the entire thread will be gone. 



73 - John - N7GHZ

On Wed, Sep 2, 2020, 12:03 AM Barry N1NQD via groups.io <koolkat505=yahoo.com@groups.io> wrote:
John-nothing got deleted.  If  you look below the reply line it shows a message to "show all 13 messages", or something to that effect.  When you hit the button, everything shows up in order!  Hope this helps-

73-Barry-N1NQD



locked Re: Vertical lines in WSJT-X waterfall

JP Tucson, AZ
 

Uh, it's there... and then it is not!

Good bye, adios, sayonara, dasvidaniya...

Later when you you go back & click on the linked thread, it is gone!!!

That's why on some of threads that I really want to save; I'll actually copy & paste the info into an email & send it back to myself &/or save it as a word doc.

There is a reason people keep asking you the same thing, over & over again, Bill.  Like the .adi header problem, etc.. Again, that is why I suggested the new - "known issues" page on the original wsjt-x home page.



73 - John - N7GHZ


On Wed, Sep 2, 2020, 3:31 AM Bill Somerville <g4wjs@...> wrote:
John,

please explain?

73
Bill
G4WJS.

On 02/09/2020 11:18, JP Tucson, AZ wrote:
Well, in a few days the entire thread will be gone. 



73 - John - N7GHZ

On Wed, Sep 2, 2020, 12:03 AM Barry N1NQD via groups.io <koolkat505=yahoo.com@groups.io> wrote:
John-nothing got deleted.  If  you look below the reply line it shows a message to "show all 13 messages", or something to that effect.  When you hit the button, everything shows up in order!  Hope this helps-

73-Barry-N1NQD




locked Re: Vertical lines in WSJT-X waterfall

Bill Somerville
 

John,

please explain?

73
Bill
G4WJS.

On 02/09/2020 11:18, JP Tucson, AZ wrote:

Well, in a few days the entire thread will be gone. 



73 - John - N7GHZ

On Wed, Sep 2, 2020, 12:03 AM Barry N1NQD via groups.io <koolkat505=yahoo.com@groups.io> wrote:
John-nothing got deleted.  If  you look below the reply line it shows a message to "show all 13 messages", or something to that effect.  When you hit the button, everything shows up in order!  Hope this helps-

73-Barry-N1NQD



locked Re: Blind ham in need of help to get started

Bill Somerville
 

On 02/09/2020 03:51, Andrew OBrien wrote:
I am happy to try and help, I am a former TS-200u user.  The TS-2000 will also require some sort of interface that handles sound since it has no built-in sound card.  Do you have an interface ?

Andy K3UK
Andy,

Georgina stated that she has a SignaLink USB interface, and it is already configured for use with a TS-2000.

73
Bill
G4WJS.