On 31/03/2020 01:58, Scott Rosenfeld
my WSJT-X audio level to the radio is screwed up.
was working fine as of Thursday / Friday.
drives it fine, as always.
even with the slider at full, gives me almost no audio output to
have checked that the speaker being used is the USB codec. I
have the monitor function active in the 7300 so I can hear the
audio driving signal. I’ve gone into the windows audio mixer and
messed with everything.
Just a teeny tiny audio signal.
even uninstalled WSJT-X 2.1 and installed 2.12.
this post details how to set the Tx audio levels with WSJT-X:
Note particularly that you should set the Tx audio offset to
about 1500 Hz for this procedure.