Thanks Hasan,

IIRC, I've seen WSJT-X decode outside my waterfall. Obviously if the rig's filter is less than 3k then that restricts what would get decoded.

73 Phil GM3ZZA

On Tuesday, 18 February 2020, 19:54:18 GMT, Chris Zukowski <czukowski@...> wrote:

Mine tracks by default unless I tell it to “Hold TX Freq”. 

On Tue, Feb 18, 2020 at 11:52 AM Russell Blair <nc5opsk@...> wrote:

Thanks to all for your input, well I guest I like for the Tx to track the Rx. Thanks Hub I'l give that a try, if not then I'l use it as is. Thanks all 

Russell NC5O

__________________________________
Sent from eM Client | www.emclient.com

------ Original Message ------

From: "Herb Blue" <WB8ASI@...>

To: WSJTX@groups.io

Sent: 2/18/2020 11:50:34 AM

Subject: Re: [WSJTX] Tx tracking Rx

They move together when you hold down the Ctrl key.   73, Herb WB8ASI

On February 18, 2020 at 12:39 PM Russell Blair <nc5opsk@...> wrote:

Ok well that did fix what I wanted it to, when I move the Rx I would like the Tx to move as well. ?

I'm not operating split mode.

Russell NC5O  

__________________________________
Sent from eM Client | www.emclient.com

------ Original Message ------

From: "Nc8q-mesh@..." < nc8q-mesh@...>

To: WSJTX@groups.io

Sent: 2/18/2020 9:35:04 AM

Subject: Re: [WSJTX] Tx tracking Rx

On 2/18/20 10:25 AM, Russell Blair wrote:

Years ago when I used this program there was a box to check for the Tx to track the Rx, Did I miss it here, I looked in the online help and found no help or I missed it there as well. So is there a way to set the Tx to track the Rx. ?

Russell NC5O

Kind of.
There is a box to hold TX or not.
Look for 'Hold Tx Freq' box.

--

 

--
73 Phil GM3ZZA