Locked Re: Transmit Spike on JT65b

neil_zampella <neilz@...>

Its not surprising that you see the same issue on the clone, as it uses much of the same code base.

This has been reported previously, I know I've been Bill comment that it shouldn't affect anything, but I forget when I read that.

Neil, KN3ILZ

On 1/16/2020 12:14 PM, Thomas Riccio wrote:

I am running a flex6700 with a beko power amp on 2m directly. My new microham peak power meter is showing a power output spike occurring with WJST -X JT65b just at the beginning of the transmit sequence. No power spike if I hit the tune button on WJST. Seems like there is an audio spike that is generated by WJST just at the beginning of the transmission which occurs on JT65 and occasionally on FT8 but none of the other modes. The transmit spike is 30% or so higher and lasts for about 500ms. I can eliminate the spike by setting a 1200ms or greater transmit delay on the flex 6700 and setting the transmit delay on WJST to 0 seconds.
Interestingly I get the same transmit spike using the JTDX program.
Anyone else notice this phenomenom?


Join {main@WSJTX.groups.io to automatically receive all group messages.