1. Messages
  2. CQ problem

locked Re: CQ problem

neil_zampella <neilz@...>
 

Different thread than this one, and evidently you're agreeing with me as I wrote there:

"Y'all do know that JT-Alert will interface with ACLog (which is the N3FJP logger's actual name) to log to the logger's database, and direct ACLog to upload directly to LoTW, as well as eQSL and Club Log if you use them."

On 1/13/2020 4:07 PM, Dave Alexander wrote:

I was replying to your statement about N3FJP and WSJT-X

 

73’s

Dave

KA3PMW

 

From: WSJTX@groups.io On Behalf Of neil_zampella
Sent: Monday, January 13, 2020 4:05 PM
To: WSJTX@groups.io
Subject: Re: [WSJTX] CQ problem

 

Dave.

are you sure you replied to the correct thread??   This one's talking about a way that keeps the enable TX button from turning off.

Neil

On 1/13/2020 3:47 PM, Dave Alexander wrote:

That’s strange. I have been using N3FJP’s ACL with WSJT-X and JTAlert exclusively and it works flawlessly. I have 7078 contacts.

 

73’s

Dave

KA3PMW

 

From: WSJTX@groups.io On Behalf Of neil_zampella
Sent: Monday, January 13, 2020 3:27 PM
To: WSJTX@groups.io
Subject: Re: [WSJTX] CQ problem

 

It does not ... the WSJT-X is built so that the operator initiates the next Tx sequence if calling CQ.    

Neil, KN3iLZ

On 1/13/2020 1:04 PM, chuckc192000 via Groups.Io wrote:

JTDX has a "1 QSO" button to determine if Enable Tx button is disabled after one QSO.  I can't remember if WSJT-X has that same button.

--
Chuck, WB4UIH 


 



 


    

  


          

          
        
        
        
      


      
      


      

    


          
    

      
      

        

        

        
          

            

              
              
            

          

        
        
      
      

        

          

        

      

      
    		
    
    
      
    
    
  


        
      

      
        
      

      

        
      

    

  



  

   

        

          Join main@WSJTX.groups.io to automatically receive all group messages.