1. Messages
  2. CQ problem

locked Re: CQ problem

Dave
 

Kenwood TS-480

 

73’s

Dave

KA3PMW

 

From: WSJTX@groups.io On Behalf Of John Ratcliffe
Sent: Monday, January 13, 2020 3:50 PM
To: WSJTX@groups.io
Subject: Re: [WSJTX] CQ problem

 

And you're using an Icom IC9700? If so can I contact you off thread to discuss your setup please?

 

From: WSJTX@groups.io <WSJTX@groups.io> on behalf of Dave Alexander <dave.alexander1947@...>
Sent: 13 January 2020 20:47
To: WSJTX@groups.io <WSJTX@groups.io>
Subject: Re: [WSJTX] CQ problem

 

That’s strange. I have been using N3FJP’s ACL with WSJT-X and JTAlert exclusively and it works flawlessly. I have 7078 contacts.

 

73’s

Dave

KA3PMW

 

From: WSJTX@groups.io On Behalf Of neil_zampella
Sent: Monday, January 13, 2020 3:27 PM
To: WSJTX@groups.io
Subject: Re: [WSJTX] CQ problem

 

It does not ... the WSJT-X is built so that the operator initiates the next Tx sequence if calling CQ.    

Neil, KN3iLZ

On 1/13/2020 1:04 PM, chuckc192000 via Groups.Io wrote:

JTDX has a "1 QSO" button to determine if Enable Tx button is disabled after one QSO.  I can't remember if WSJT-X has that same button.

--
Chuck, WB4UIH 

 
Join main@WSJTX.groups.io to automatically receive all group messages.