toggle quoted messageShow quoted text
My problem with the no power issue seems to have come down to the red xmit bar jumping out of range on the waterfall on transmit.
Sounds crazy but it happened.
I was looking at every item in settings and on the Flex only to discover that the bar was moving.
After re-installing WSJT, the problem seems to have gone away.
From: WSJTX@groups.io <WSJTX@groups.io> On Behalf Of Seannon Baker (AG0NY)
Sent: Thursday, January 9, 2020 10:11 PM
Subject: Re: [WSJTX] No power on transmit
FLDigi uses the same ones...it's the ones on the side of my laptop
On Thu, Jan 9, 2020 at 10:08 PM Jim Shorney <jshorney@...> wrote:
Don't overlook the obvious. Check your audio connections.
On Thu, 9 Jan 2020 21:34:32 -0600
"Seannon Baker (AG0NY)" <KD4IYI@...> wrote:
> so, here's my screen, just pulled it up to screen shot it first one shows
> tune, bottom left
> [image: Screenshot from 2020-01-09 21-24-58.png]
> next is it in transmit on JT9, transmit light is on, but no output on the
> radio note it's at 1500hz tx and rx
> [image: Screenshot from 2020-01-09 21-27-39.png]
> next the radio tab, everything worked for me a few days ago, FLRig and
> FLDigi still work as expected
> [image: Screenshot from 2020-01-09 12-08-45.png]
> lastly Audio tab
> [image: Screenshot from 2020-01-09 12-11-20.png]
> OS:Ubuntu 19.10
> Rig:Kenwood TS480HX
> RT Systems USB to Serial adapter
> "Echolink" audio to MiniDIN6 cable
> WSJT-X 2.1.0
> Seannon AG0NY
> On Thu, Jan 9, 2020 at 9:22 PM Andrew OBrien <k3ukandy@...> wrote:
> > Bill, I've done that more than a couple of times!
> > Andy K3UK
> > Joe,
> > those symptoms are consistent with you having set your Tx audio offset
> > outside of the pass band of your rig's SSB filter. "
> > 73
> > Bill
> > G4WJS.
“It is a simple feat of scientific electrical engineering — only expensive — blind, faint-hearted, doubting world.”