1. posterid:6701944
  2. Messages

Locked Re: WSJTx F/H VFO change when xmitting #FoxAndHound

Tim Dawson
 

Sounds normal from here . . . It is just keeping the audio from your computer/WSJTX in the radios passband, and adjusting freq correspondingly to output the signal where you set it. IE, mod at 1500, freq at "X", signal seen at feq X. Mod at 2000, Freq set to X+500, mod adjusted to 2000-500 (IE 1500), signal still seen on freq X, as designed.

Not seeing any issue . . .

???

On February 11, 2023 4:24:34 PM CST, Juergen DL4YCD <dl4ycd@...> wrote:
Hi Steve,
hm .. today when try to work F/H I had a different shift. So I did a little test and found:
from 1000 to 1400 it goes 500Hz down
from 1500 to 1900 it does nothing
from 2000 to 2400 it goes 500Hz up
from 2500 to 2900 it goes 1000Hz up
from 3000 to 3400 it goes 1500Hz up
from 3500 to 3900 it goes 2000Hz up
and on 4000 (end of F/H) it goes 2500Hz up
and ... the setting "Fake It" is responsible for that. For "normal" qsos without "Fake It" (Split None) this does not happen. That's the reason why I was wondering :-))
73 Jürgen DL4YCD




--
Sent from my Android device with K-9 Mail. Please excuse my brevity.
Join main@WSJTX.groups.io to automatically receive all group messages.