Ok, so then what would you use the SignaLink box for with this radio? Not
sure why they would SELL this device for this radio and it's mic jack cable
if it cannot be used.

On Tue, Jan 31, 2023 at 1:59 PM Gilbert Baron <w0mn00@...> wrote:

Yes , it is FM pnly and annnot be used with FT modes. O MUST use SSB.

See from online
What is a TYT th9800?
The TYT TH9800 Quad Band Transmit, Twin Receive, Dual Display FM Radio

Outlook LT Gil W0MN
Hierro Candente Batir de Repente
44.08226 N 92.51265 W EN34rb


-----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Randy via
groups.io
Sent: 31 January 2023 09:31
To: main@wsjtx.groups.io
Subject: Re: [WSJTX] #FST4

All,
I got it loaded…
Onward!
73’s
de Randy KC1RZR
On Jan 31, 2023, at 8:18 AM, Randall Oxley <r.oxley@...> wrote:

All,
Has anyone encountered an error message like this “failed to create a
shared memory block”
which results in another message which says “fatal error”? I’m trying to
install wsjt-x on a MacBook Pro.
Any help is most appreciated!
73’s,
de Randy KC1RZR
On Jan 30, 2023, at 6:48 PM, Jim Bacher - WB8VSU <wb8vsu@...> wrote:

Seems to me the TYT TH-9800 is an FM box, not SSB, so it will not work
with WSJT-X.

⁣Jim Bacher, WB8VSU
wb8vsu@...
https:\\trc.guru​

On Jan 30, 2023, 5:56 PM, at 5:56 PM, "Michael Black via groups.io"
<mdblack98@...> wrote:

Please place this file as described
belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl
=0 C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log
file will be in the same location
For Linux put it in ~/.config The WSJT-X_Rigcontrol.log file will be
here: ~/.local/share/WSJT-X
For MacOS put it in /Users/[username]/Library/Preferences Restart
WSJT-X and duplicate the problem.Shut down WSJT-X Then send me the
WSJT-X_RigControl.log fileMike W9MDB




On Monday, January 30, 2023 at 03:52:16 PM CST, David Smalley
<buckeyes57@...> wrote:

Hello,
I am brand new to this but very good with computers. I have the
SignaLink USB and made the proper jumper connections as stated in
their configuration.
I am having a very hard time finding my radio in the list.. but it IS
in the list for the SignaLink.
I have the TYT TH-9800 (which is a clone to the Yaesu FT-8900).
Neither of these radios are listed in the pull down for RIG in the
settings - radio page.
I keep getting a RIG FAILURE error when doing the TEST CAT button.
I am not sure what settings need to be set for the Baud Rate, Data
Bits, Stop Bits, Hand Shake.
I assume the Serial Port should be USB since the SignaLink is plugged
into the USB and no other port came up when I connected it.

I am not sure if there is another radio that has the same settings as
this one. I have searched all over and there isn't any good setup
videos on YouTube that clearly show what to do here. I have seen about
10 different ones and they are all very generic and do not go into
detail with this issue.
I cannot find a page that shows this radio and what settings to set.

Please let me know what I am doing wrong here.

Thanks so much!

David

K5BUX

--
W0MN EN34rb 44.08226 N 92.51265 W

Hierro candente, batir de repente

HP Laptop