Locked Re: Receiving +80 on the program #AudioIssues


I may do that but a fellow offered to use Team Viewer and look in my laptop.

On 11/12/2022 12:52 PM, Bruce N7XGR wrote:
Dave, Then downgrade the version of WSJT-X to see if the problem stops.
You can get prior versions here,

Bruce N7XGR

On Sat, Nov 12, 2022 at 1:25 PM Dave Tucker Nu4N<dwtucker19@...>

Well Bruce I have the Rig Blaster connected to the computer as a USB
port or course. The rig Blaster is connected to my Alinco DX 70TH. Then
I have have WSjt-X with the audio in and out as Rig Blaster USB. Ever
since I upgraded my WSJT-X I have had this problem. I cannot reduce to
audio in as tho the Rig Baster is no connected. I wish some one could
log into my system with Team viewer and look at the problem.

Tnx for the reply. Dave NU4N

On 11/12/2022 12:15 PM, Bruce N7XGR wrote:
Dave, You seem to be having several problems with your setup.
Describe the entire setup starting with what type of radio and how
it is connected to the Blaster. I have this Blaster also but have not
it because of the direct connection with just a USB cable to my newer
I know that the Blaster connects to the PC via the USB.
The Blaster has PTT and audio I/O with pots for audio (TX/RX) gain
When I had my Blaster connected to a IC756P3 I modified the connection to
use the ACCY DIN jack instead of the MIC jack, MIC jack should never be
What is the slider setting in the input audio properties for the Blaster?
On any tab for this audio input is there a AGC checkbox?

Bruce N7XGR

On Sat, Nov 12, 2022 at 12:08 PM Dave Tucker Nu4N<dwtucker19@...


Yes my Windows was up to date. Like I said a did a system restore twice
and still getting 80 db. I am sure it's a setting in the input is set
wrong. But I keep trying and can't bring the db's down. Well the program
is still working. I sent West Mountain Radio a e-mail. Maybe they can
find my problem.

On 11/12/2022 10:37 AM, Dave Garber wrote:
did windows do an update? if yes, reselect your audio selections, it
fix itself

Dave Garber

On Sat, Nov 12, 2022 at 11:18 AM Dave Tucker Nu4N<

I seem to have a audio issue with my Rig Blaster Advantage. I am
getting a
db level of 80 db. I must have a setting wrong. I have WSJT-X with the
audio in set in the settings of the Rig Blaster. I am trying to
the audio but can't seem to able to control the audio.
Ant help would be appreciated.
*73'S DAVE NU4N*

73's Dave NU4N

*73'S DAVE NU4N*


*73'S DAVE NU4N*

*73'S DAVE NU4N*

Join {main@WSJTX.groups.io to automatically receive all group messages.