Let's try again without the HTML formatting messing it up.

Please place this file as described below
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0

C:\Users\[username]\AppData\Local\WSJT-X
The WSJT-X_Rigcontrol.log file will be in the same location

For Linux put it in
~/.config
The WSJT-X_Rigcontrol.log file will be here:
~/.local/share/WSJT-X

For MacOS put it in
/Users/[username]/Library/Preferences
Restart WSJT-X and duplicate the problem.
Shut down WSJT-X

Then send me the WSJT-X_RigControl.log file
Mike W9MDB









On Sunday, October 9, 2022 at 05:37:34 PM CDT, Michael Black via groups.io <mdblack98@...> wrote:






Please place this file as described belowhttps://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0
C:\Users\[username]\AppData\Local\WSJT-X The WSJT-X_Rigcontrol.log file will be in the same location
For Linux put it in   ~/.config The WSJT-X_Rigcontrol.log file will be here: ~/.local/share/WSJT-X
For MacOS put it in /Users/[username]/Library/Preferences Restart WSJT-X and duplicate the problem.Shut down WSJT-X
Then send me the WSJT-X_RigControl.log fileMike W9MDB



    On Sunday, October 9, 2022 at 02:19:30 PM CDT, Sven <treknor@...> wrote:

Hi,

nope. no Difference. ( with WSJT-X 2.6.0-rc4) Rig still reacts the same
way. still not working

Am 09.10.2022 um 08:42 schrieb Alex Kindred N7AWK:

I'm no expert, but here's my $0.02 worth:

What version of hamlib are you using?

The error message seems to be indicating that you have set the software to use the FT-817 as the backend (the rig selection).

I checked the supported radio list & and for the most recent versions of hamlib, the FT-857 has it's own entry, indicating it's own backend for that radio.

https://github.com/Hamlib/Hamlib/wiki/Supported-Radios

I'm not familiar with those two radios, so I don't know if the FT-857 is 100% compatible with the FT-817 backend.

So, you might want to double check your rig setting.

On Thu, Oct  6, 2022 at 01:57 PM, Sven wrote:
<snip>

Error Message is:

Rig Failure

Hamlib error: Command rejected by the rig
0000   f0
ft817_read_ack:ack received (240)