get wsjtx working first, do not run HRD or jtalert. if it is not
decoding, perhaps your clock time is that far off.

I use bkttimesync, but there others go to time.is on the web and check
you time

cat control is not necessary to receive decodes. make sure wsjtx is in
fact in ft8 mode, mine started in jt9. but cat control will be needed if
'fake it'; is used on tx.

I am running 2 occurances of wsjtx, on a w11 machine, along with 2
jtalerts, and log4om. no issue unless windows updates, and I lose the
audio.

Dave Garber
VE3WEJ / VE3IE


On Tue, Oct 4, 2022 at 5:23 PM Stan Galonski via groups.io <sgalonski1=
aol.com@groups.io> wrote:

All, My old setup was a Windows 10 desktop, Signalink usb, Yaesu FTDX5000
and running HRD as the logging program all worked well with 1,000's of QSOs
logged. I upgraded my Desktop to a Dell Inspiration 3900 running Windows
11, I can't get WSJT to work, no stations show in Band activity or the
Graph, Tune will show 100 watts then drop to 35 watts after 5 seconds. I
can Log a dummy QSO and it will show on the HDR log. I have set up WSJT
and HRD per their manual, HDR seems fine unless I start WSJT first then I
get a "com 3 in use by another program".
I am at a total loss on what to do next.
73, StanKK3KK