Stan
You also need to check the Windows-Settings-Sound to make sure that what
you want is accurately in there. This is in addition to having wsjt
configured correctly.

Dennis
W1UE

On Tue, Oct 4, 2022 at 18:08 Stan Galonski via groups.io <sgalonski1=
aol.com@groups.io> wrote:

Dennis,
That's the issue, trying to get it to work with just the rig. Followed
the setup procedure and no signal decodes? StanKK3KK
In a message dated 10/4/2022 2:52:38 PM Pacific Standard Time,
egan.dennis88@... writes:
Stan My best advice- get wsjt-x to work first. If wsjt doesn’t work, then
thetwo programs won’t work. Once that works, add in HRD. Dennis W1UE On
Tue, Oct 4, 2022 at 17:25 Stan Galonski via groups.io <sgalonski1=
aol.com@groups.io> wrote: > All, My old setup was a Windows 10 desktop,
Signalink usb, Yaesu FTDX5000> and running HRD as the logging program all
worked well with 1,000's of QSOs> logged. I upgraded my Desktop to a Dell
Inspiration 3900 running Windows> 11, I can't get WSJT to work, no stations
show in Band activity or the> Graph, Tune will show 100 watts then drop to
35 watts after 5 seconds. I> can Log a dummy QSO and it will show on the
HDR log. I have set up WSJT> and HRD per their manual, HDR seems fine
unless I start WSJT first then I> get a "com 3 in use by another
program".> I am at a total loss on what to do next.> 73, StanKK3KK>>>