Stan
Do any signals show in the waterfall? If not,
Then either
1. Wrong sound card selected
2. Wrong sound card input selected
3. Input to the sound card not adjusted correctly.
4. If you have a USB sound card available, try using it
5. Does your computer have separate jacks for headphones and microphone?

Dennis W1UE

On Tue, Oct 4, 2022 at 18:08 Stan Galonski via groups.io <sgalonski1=
aol.com@groups.io> wrote:

Dennis,
That's the issue, trying to get it to work with just the rig. Followed
the setup procedure and no signal decodes? StanKK3KK
In a message dated 10/4/2022 2:52:38 PM Pacific Standard Time,
egan.dennis88@... writes:
Stan My best advice- get wsjt-x to work first. If wsjt doesn’t work, then
thetwo programs won’t work. Once that works, add in HRD. Dennis W1UE On
Tue, Oct 4, 2022 at 17:25 Stan Galonski via groups.io <sgalonski1=
aol.com@groups.io> wrote: > All, My old setup was a Windows 10 desktop,
Signalink usb, Yaesu FTDX5000> and running HRD as the logging program all
worked well with 1,000's of QSOs> logged. I upgraded my Desktop to a Dell
Inspiration 3900 running Windows> 11, I can't get WSJT to work, no stations
show in Band activity or the> Graph, Tune will show 100 watts then drop to
35 watts after 5 seconds. I> can Log a dummy QSO and it will show on the
HDR log. I have set up WSJT> and HRD per their manual, HDR seems fine
unless I start WSJT first then I> get a "com 3 in use by another
program".> I am at a total loss on what to do next.> 73, StanKK3KK>>>