I confirm the error exactly as described. when it must read 7.000 MHz it
reads 7,000 MHz and that makes it impossible to use it. Keeps happening
since more than a year in all wsjtx versions until the last one I tried
some months ago, and it looks like it keeps happening. Quick "fix": use an
old versión from early 2019.
El mié, 17 ago 2022 a la(s) 13:45, Michael Black via groups.io (mdblack98=
Please try this DLL....I just made a change that should help this....
And if it still is wrong (which it likely will be) please provide debug
New hamlib for installation directions
#1 Shut down WSJTX
Linux/Unix/Mac users need to compile the latest tar file from
Note: If compiling on Unix-like systems please uninstall any Hamlib
package you have before installing the new build
#2 If you don't save directly you need to open a file browser and move the
file that way.
If you're not familiar with that here's a video on the file browser -
On Wednesday, August 17, 2022 at 12:47:55 AM CDT, kedrot@... <
I'm trying to setup CAT to control my rig; my settings are:
8 data bits
2 stop bits
other pins on default
The Test CAT button works, it sets to green, and PTT also correctly starts
When selecting a band from the dropdown, the rig is correctly set to the
appropriate frequency. A couple of seconds later, when the system polls the
current frequency, it's 100 times higher and it ends in 48. E.g.: 40m sets
to 7,074.000 Two seconds later, it becomes 707,400.048.
A few seconds later, I get a timeout error and the rig disconnects.
Any help is appreciated.