On July 23, 2019 at 11:55 PM "Michael Black via Groups.Io" <mdblack98@...> wrote:

In which case you probably want the MIC level adjustment  menu 079

I figure you were using the USB.

de Mike W9MDB

On Tuesday, July 23, 2019, 10:51:01 PM CDT, Herb Blue <WB8ASI@...> wrote:

Thanks Detective Mike........I didn't mention I'm running a FTdx5000, but menu 070 doesn't help even set to zero.  I have audio running from computer via cable into rig via rear MIC jack, and from rig rear AV out jack to computer mic jack.  (never figured out how to make USB audio CODEC to work on this rig).  Has worked good for me a long time.  Now difficult figuring out how to use PWR slider with 64-bit install.  Seems way off normal, but I'm making QSO's.  Any suggestions are most welcome, and others reading this will also benefit.  That's how I've learned how to even get started with this computer stuff.  I'll look at my menu choices if there is another setting that needs changing.  73 and thanks again, Herb WB8ASI

On July 23, 2019 at 11:34 PM "Michael Black via Groups.Io" <mdblack98@...> wrote:

Go to menu 070 and turn it down.  You can likely crank the Pwr slider all the way up with menu 070 being the adjustment you need to make.

de Mike W9MDB

On Tuesday, July 23, 2019, 08:20:42 PM CDT, Herb Blue <WB8ASI@...> wrote:

Thanks Bill,  I've just spent the last few days changing from a Windows 7 32-bit PC to one that's WIndows 10 64-bit including upgrading to WSJT-X v2.1.0 and JTAlert 2.13.10, while bringing along my LOG4OM.  Whew, couldn't have made it without all I've learned here on-line from everyone's experiences.  Now ;you're procedure on volume control is the finishing touch.  I've got the device and WSJT-X set at 0db (didn't even know about volume mixer, but I found it).  Now I can hardly keep the level down to keep from seeing ALC on the meter even with the PWR slider at the bottom.   I liked it better with 32-bit where I could tweak the PWR slider mid-range to just see the meter movement on ALC.  Am I understanding your procedure correctly???   Thanks and 73, Herb. WB8ASI

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3726): https://groups.io/g/WSJTX/message/3726

Mute This Topic: https://groups.io/mt/32576482/212453
-=-=-
Moderated by Andy K3UK and Roger G4HZA
-=-=-
Group Owner: WSJTX+ owner@groups.io
Unsubscribe: https://groups.io/g/WSJTX/leave/4084689/1473993136/xyzzy [ mdblack98@...]
-=-=-=-=-=-=-=-=-=-=-=-

 

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3729): https://groups.io/g/WSJTX/message/3729
Mute This Topic: https://groups.io/mt/32576482/1261879

-=-=-
Moderated by Andy K3UK and Roger G4HZA
-=-=-
Group Owner: WSJTX+owner@groups.io

Unsubscribe: https://groups.io/g/WSJTX/leave/3948057/204906178/xyzzy [WB8ASI@...]

-=-=-=-=-=-=-=-=-=-=-=-

 

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3730): https://groups.io/g/WSJTX/message/3730

Mute This Topic: https://groups.io/mt/32576482/212453
-=-=-
Moderated by Andy K3UK and Roger G4HZA
-=-=-
Group Owner: WSJTX+ owner@groups.io
Unsubscribe: https://groups.io/g/WSJTX/leave/4084689/1473993136/xyzzy [ mdblack98@...]
-=-=-=-=-=-=-=-=-=-=-=-

-=-=-=-=-=-=-=-=-=-=-=-
Groups.io Links: You receive all messages sent to this group.

View/Reply Online (#3731): https://groups.io/g/WSJTX/message/3731
Mute This Topic: https://groups.io/mt/32576482/1261879
-=-=-
Moderated by Andy K3UK and Roger G4HZA
-=-=-
Group Owner: WSJTX+owner@groups.io
Unsubscribe: https://groups.io/g/WSJTX/leave/3948057/204906178/xyzzy [WB8ASI@...]
-=-=-=-=-=-=-=-=-=-=-=-