locked Re: WSJT-X 2.6.0-rc1 #hamlib


Bengt SM6MUY
 

Normally it works fine. But if I start to "play" with the radio, IC-7300 WSJT-X "complains after a while (loosing the connection). It's not any new thing. Always been like that. But before it was just to press "retry" and then the connection between WSJT-X and the radio was established again. That don't work anymore.

I'm using a USB connection but I have not changed any (Windows) driver. Everything is like before I did the upgrade to 2.6.0. Something happened when I did the upgrade. Ok I will try to re-install the USB driver again.

73/Bengt

On 2022-07-16 14:40, Michael Black via groups.io wrote:
If only a restart fixes it then it sounds like something with the serial port driver.
I assume you have a USB serial adapter?  What rig is this?
Uninstall the serial port in the Device Manager (I'm also assuming you are on Window).
Then reboot and let it reinstall.  It might change COM port numbers on you.
Also...how often is "time to time" ?
Another thing to check in Device Manager is to turn off Power Management on all USB devices that have that option.
Mike W9MDB



On Saturday, July 16, 2022 at 04:25:22 AM CDT, Bengt SM6MUY via groups.io <muy@...> wrote:
Hi

Upgraded and I have CAT issue now from time to time. Hamlib error and it
doesn't help to do "retry" which worked before. The frequency setting is
0.000. The only fix is to restart the PC. Very annoying.

Tried to go back to 2.5.4 but it didn't help.Even did a unistall and a
new install. Aree there any "hidden" files somewhere which should be
removed ?

73/Bengt, SM6MUY


Rig failure
Hamlib error: rig_set_conf_called
rig_confparam_lookup called for 3
rig_set_conf:no_xchg='1'

and so on...









Join main@WSJTX.groups.io to automatically receive all group messages.