Locked Re: logging #WSJTX_config

Kevin Scott Hughes

Where does that go? I'm just starting to figure out "Reporting". Thanks, Kevin, K7KSH
www.reverbnation.com/kevinscotthugheshttp://www.facebook.com/kevinscotthughes3Confidentiality Notice. NOTICE:  The information contained in this e-mail and any document attached hereto is intended only for the named recipient(s).  It is the property of Kevin Scott Hughes LLC and shall not be used, disclosed or reproduced without the express written consent of Kevin Scott Hughes LLC.  If you are not the intended recipient or the employee or agent responsible for delivering this message in confidence to the intended recipient(s)), you are hereby notified that you have received this transmittal in error, and any review, dissemination, distribution or copying of this transmittal or its attachments is strictly prohibited.  If you have received this transmittal and/or attachments in error, please notify me by reply e-mail or telephone 360-435-2044 and immediately delete this message and all its attachments.  Thank you, Kevin Scott Hughes

On Friday, July 15, 2022 at 11:50:53 AM MDT, Michael Black via groups.io <mdblack98@...> wrote:

Everybody should try using multicast address like now as many programs are starting to share the broadcast data from WSJTX.
HRD, GridTracker, JTAlert, and more.
Mike W9MDB

    On Friday, July 15, 2022 at 12:36:28 PM CDT, Dave KD2SGM <dfreeswick@...> wrote: 


I, along with many others, had a similar issue with due to the HRD update that included HRD Alert. Seems that HRD grabbed the port normally used to broadcast this info to other programs and was not allowing it to be used by others. In my case N1MM, WSJT-X, and HRD we’re affected. In addition there were quite a few GridTracker folks affected too. My fix was to revert back to a previous version of HRD. Others moved forward and changed the HRD setting to allow multicasting. In addition the port needed to be changed in each program to allow the transfer of data. I believe the one being used is Check the HRD, N1MM, and GridTracker forums, in addition to this one. Search on HRD Alert and you should get quite a bit of information. One other thing you may want to try that I also used as a work around is to load HRD last. That seemed to work too.

Good Luck,
Dave, KD2SGM

Join main@WSJTX.groups.io to automatically receive all group messages.