locked Re: #Elecraft K2 CAT Connection Fails #Elecraft



I used the Kenwood strapping on my Front Panel board in my K2.
Pin 1: AF
Pin 2: PTT
GND: 7&8.

No bias resistor is required for a Kenwood mic.

I never added any capacitor on the line from the PC audio to my mic input. But the SSB adapter schematic shows a 2.2 uF capacitor on the MIC AF input to the board routing into the Speech Compressor. I have Speech Compressor configured OFF and Mic Gain set at minimum in the K2 menu.

Murray VA1CQ

This email has been checked for viruses by AVG.

Join main@WSJTX.groups.io to automatically receive all group messages.