locked Re: WSJT-X upgrade to v2.5.3 #hamlib


Amos Sobel 4X4MF
 

Mike

1. I am currently running WSJT-X v2.5.3 with no trouble at all. Why should I upgrade the hamlib?
2. Will the next revision of WSJT-X come with the new hamlib to save us the trouble of updating it?

Amos 4X4MF

-----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Michael Black via groups.io
Sent: Friday, December 24, 2021 00:10
To: main@wsjtx.groups.io; main@WSJTX.groups.io
Subject: Re: [WSJTX] WSJT-X upgrade to v2.5.3 #hamlib

Please place this file in C:\Users\[username]\AppData\Local\WSJT-X
https://www.dropbox.com/s/t52ngcalsgnpm8m/wsjtx_log_config.ini?dl=0

Restart WSJT-X and duplicate the problem.
Shut down WSJT-X

Then send me the WSJT-X_RigControl.log file that will be in the same location.

Mike W9MDB





On Thursday, December 23, 2021, 01:20:06 PM CST, Chet, N8RA <chetsubaccount@...> wrote:

I also just installed the 64 bit DLL. Test CAT works. Test PTT does not for a K3 with PTT set to RTS. Tried PTT set to CAT and that did not work either.
If I loaded WSJT from N1MM+ logger, CAT worked.

I did not have the original dll anymore, so renamed the new one and then ran the WSJT-X 2.5.3 installer again to get the original one back, and now all works OK.

73,
Chet, N8RA


-----Original Message-----
From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Michael Black via groups.io
Sent: Thursday, December 23, 2021 9:28 AM
To: main@WSJTX.groups.io
Subject: Re: [WSJTX] WSJT-X upgrade to v2.5.3 #hamlib

That should be fixed now.
New hamlib for Windows installation directions
#1 Shut down WSJTX
#2 Download either the 32-bit or 64-bit DLL -- hopefully your browser doesn't block it but may warn you multiple times.
If you can do a "Save As" you can save it directly in \WSJT\WSJTX\bin and replace the libhamlib-4.dll that is there.
http://n0nb.users.sourceforge.net/dll32/libhamlib-4.dll
http://n0nb.users.sourceforge.net/dll64/libhamlib-4.dll
#3 If you don't save directly you need to open a file browser and move the file that way.
If you're not familiar with that here's a video on the file browser.https://www.youtube.com/watch?v=AyVqCJrs9dk
Mike W9MDB




On Thursday, December 23, 2021, 07:36:05 AM CST, Steve VE4FX <sckeith@...> wrote:

Before I update to 2.5.3 my IC-7300 would turn on about 5 seconds after the program launched, After the update, it takes way longer to turn on the radio. Once it didn't and I got a Hamlib error. I'm running Windows 11 with all updates.

Steve VE4FX

Join main@WSJTX.groups.io to automatically receive all group messages.