locked Re: WSJT-X loses my output setting periodically #AudioIssues



Here’s an article that touches on the USB settings – sounds like you’ve covered most, perhaps not all:



If a USB device, including a serial port or virtual USB/RS232 serial port gets shut down even temporarily by windows, the OS will then decide to disconnect it and anything attached, including the audio codec, so will switch to another codec.


Good luck,

Colin VE3MSC


From: main@WSJTX.groups.io <main@WSJTX.groups.io> On Behalf Of Pete Singleton
Sent: October 4, 2021 13:25
To: main@WSJTX.groups.io
Subject: Re: [WSJTX] WSJT-X loses my output setting periodically #audio_issues


Me too!
I've disabled USB selective suspend in Control Panel, Power Options, Hi-performance plan, advanced settings.
I've disabled power saving in Device Manager, USB (various).
If I don't use transmit for a while the audio goes to my speakers rather than the codec.

Any helpful suggestions?

Join main@WSJTX.groups.io to automatically receive all group messages.