toggle quoted messageShow quoted text
that error is probably because you are
not running MAP65 from the right working directory. You mentioned
you had modified your shortcuts before, please check you have done
that correctly as per the Installation section in the Quick Start
On 11/07/2021 00:46, Ken via groups.io
1) Deleted MAP65 ini file
2) Restarted MAP65 - Redid settings - Set MAP65 to XPOL and
checked Sound Card +10 and reentered Callsign and Grid.
3) MAP65 ran for a few minutes (bth ch receiving now) then
displayed a Subprocess Error: Subprocess failed with exit code
Subprocess Error Details:
Running C:\WSJT\wsjtx\bin\m65 -s
At line 38 of file
C:\Users|bill\src\k1jt\wsjtz\map65\libm65\q65b.f90 (unit = 9)
Fortran runtime error: Cannot open file 'wsjtx_dir.txt': No such
file or directory
Could not print backtrace:
libbacktrace could not find executable to open
Of course, MAP65 will
not open now.
I can delete the
MAP65.ini file and redo
the setup, but what do I
change so I don't get
this Error again ?
Ken - W8KEN
On 7/10/2021 6:30 PM, Bill Somerville
On 10/07/2021 22:22, Ken via
Per our earlier discussion I have loaded WSJT-X 2.5.0-RC3
which seems to be working fine on 6m FT8.
It has resolved my K3, 2 second TX delay issues.
Moving on to MAP65 3,0
1) I downloaded and brought upran ZADIG, selected DG8SAQ-12C
and replaced it with libusbK which seem to be OK.
2) I changed my desktop shortcuts as suggested in the Quick
3) WSJT-X 2.5.0 appears to come up OK.
I have not configured the radio or sound card yet as I am
waiting for my repaired K3 to arrive next week.
4) I brought up MAP65 3.0 and tried to configure the sound
card selecting DIYINHK USB Audio for the record device.
MAP65 (Windows device Manager says it is working OK) and MAP
65 showed the left channel bar graph working. The right
channel bar graph was not working. What ever sound card device
I picked was an 8 ch device.
4) Map 65 came up with an error message "Subprocess Error,
Subprocess Failed with Exit Code 2" whatever that means, and
MAP65 shut down. I cannot restar MAP65. When I try to restart
MAP65 a Windows error message comes up and says it will close
WHAT DO I DO NOW ???
Ken - W8KEN
did you have MAP65 set to Xpol mode in the settings window?
Is there any more information with the error message? If you
cannot restart MAP65 try deleting the MAP65.ini file, you will
need to redo your settings if you do that.