locked #Transmit #transmit

Tad Danley K3TD

I downloaded WSJT-X v2.4.0 and configured it to work with my IC-7610 -
using my settings for N1MM+ as a guide.  I am able to decode stations
using FT8 on 50.313 but the radio will not key the transmitter.  I have
Enable TX selected and the button is Red. The right side of the WSJT
window shows I am transmitting with my 'transmissions' highlighted in
yellow, but the rig does not key. Under Settings and the Radio tab I
have the following set:

Rig is IC-7610, Serial port is Com 3, Baud rate is 115200, 8 data bits
and 1 stop bit, Handshake is set to hardware, Force control lines are
both unselected, PTT method is VOX, Transmit audio source is unselected,
Mode is USB, Split is set to Fake it.  Under Soundcard the Input is
defaulted to Microphone (USB Audio codec).

I would appreciate any help with what I need to change to get it to TX
properly.  Thanks and 73!

Tad Danley, K3TD

Join main@WSJTX.groups.io to automatically receive all group messages.