locked Re: #WSJTX_config -- USB vs DATA-USB Modes #WSJTX_config


Charles Albert
 

Thanks for the info, Dave.

The numbers and settings look similar, but I'll have to look at them in detail.

I was able to get my FT991A/Linux/FLDIGI/WSJTX system to work. I simply copied the various filter settings from the SSB group to the DATA group, and the "deafness" went away. Made several 600+ mile contacts on FT8 at 6m yesterday with this setup.

I'm very tempted to just leave it alone now, though I am curious why in looking at about a dozen different HOW TO docs there are the same number of "...these are the only settings that will work..." statements. And that includes the docs for both FLDIGI and WSJTX.

Take Care & 73



On Fri, Jun 25, 2021 at 5:25 AM Dave KD2SGM <dfreeswick@...> wrote:
Hi Charles,

I have a Yaesu FTDX 3000 so I’m not sure if these settings will help. I spent a long time searching the internet and it took a while to get it right as everyone seems to have that one little change that makes it all work for them. I use Win4YaesuSuite to control everything so again, this may or may not fix your situation.

FTDX 3000 Menu Settings
#40 CAT RTS - Disable
#65 PC KEYING - Off
#67 DATA MODE - OTHERS
#69 OTHER DSP - 0
#75 DATA IN - USB
#76 DATA MIC GAIN - MCVR
#77 DATA OUT LEVEL - 50
MIC GAIN -20

WSJT-X Settings
Radio - FTDX 3000
Serial Port - COM 10 (COM0COM virtual port)
Baud Rate - 38400 (same as radio)
Data Bits - Default
Stop Bits - Default
Handshake - Default
PTT Method - CAT
Mode - Data/ Pkt
Split - Fake It

Good Luck,
Dave, KD2SGM


Join main@WSJTX.groups.io to automatically receive all group messages.